system: Linux mars.sprixweb.com 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
# - Find Boost include dirs and libraries
# Use this module by invoking find_package with the form:
# find_package(Boost
# [version] [EXACT] # Minimum or EXACT version e.g. 1.36.0
# [REQUIRED] # Fail with error if Boost is not found
# [COMPONENTS <libs>...] # Boost libraries by their canonical name
# ) # e.g. "date_time" for "libboost_date_time"
# This module finds headers and requested component libraries OR a CMake
# package configuration file provided by a "Boost CMake" build. For the
# latter case skip to the "Boost CMake" section below. For the former
# case results are reported in variables:
# Boost_FOUND - True if headers and requested libraries were found
# Boost_INCLUDE_DIRS - Boost include directories
# Boost_LIBRARY_DIRS - Link directories for Boost libraries
# Boost_LIBRARIES - Boost component libraries to be linked
# Boost_<C>_FOUND - True if component <C> was found (<C> is upper-case)
# Boost_<C>_LIBRARY - Libraries to link for component <C> (may include
# target_link_libraries debug/optimized keywords)
# Boost_VERSION - BOOST_VERSION value from boost/version.hpp
# Boost_LIB_VERSION - Version string appended to library filenames
# Boost_MAJOR_VERSION - Boost major version number (X in X.y.z)
# Boost_MINOR_VERSION - Boost minor version number (Y in x.Y.z)
# Boost_SUBMINOR_VERSION - Boost subminor version number (Z in x.y.Z)
# Boost_LIB_DIAGNOSTIC_DEFINITIONS (Windows)
# - Pass to add_definitions() to have diagnostic
# information about Boost's automatic linking
# displayed during compilation
#
# This module reads hints about search locations from variables:
# BOOST_ROOT - Preferred installation prefix
# (or BOOSTROOT)
# BOOST_INCLUDEDIR - Preferred include directory e.g. <prefix>/include
# BOOST_LIBRARYDIR - Preferred library directory e.g. <prefix>/lib
# Boost_NO_SYSTEM_PATHS - Set to ON to disable searching in locations not
# specified by these hint variables. Default is OFF.
# Boost_ADDITIONAL_VERSIONS
# - List of Boost versions not known to this module
# (Boost install locations may contain the version)
# and saves search results persistently in CMake cache entries:
# Boost_INCLUDE_DIR - Directory containing Boost headers
# Boost_LIBRARY_DIR - Directory containing Boost libraries
# Boost_<C>_LIBRARY_DEBUG - Component <C> library debug variant
# Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
# Users may set these hints or results as cache entries. Projects should
# not read these entries directly but instead use the above result variables.
# Note that some hint names start in upper-case "BOOST". One may specify
# these as environment variables if they are not specified as CMake variables
# or cache entries.
#
# This module first searches for the Boost header files using the above hint
# variables (excluding BOOST_LIBRARYDIR) and saves the result in
# Boost_INCLUDE_DIR. Then it searches for requested component libraries using
# the above hints (excluding BOOST_INCLUDEDIR and Boost_ADDITIONAL_VERSIONS),
# "lib" directories near Boost_INCLUDE_DIR, and the library name configuration
# settings below. It saves the library directory in Boost_LIBRARY_DIR and
# individual library locations in Boost_<C>_LIBRARY_DEBUG and
# Boost_<C>_LIBRARY_RELEASE. When one changes settings used by previous
# searches in the same build tree (excluding environment variables) this
# module discards previous search results affected by the changes and searches
# again.
#
# Boost libraries come in many variants encoded in their file name. Users or
# projects may tell this module which variant to find by setting variables:
# Boost_USE_MULTITHREADED - Set to OFF to use the non-multithreaded
# libraries ('mt' tag). Default is ON.
# Boost_USE_STATIC_LIBS - Set to ON to force the use of the static
# libraries. Default is OFF.
# Boost_USE_STATIC_RUNTIME - Set to ON or OFF to specify whether to use
# libraries linked statically to the C++ runtime
# ('s' tag). Default is platform dependent.
# Boost_USE_DEBUG_PYTHON - Set to ON to use libraries compiled with a
# debug Python build ('y' tag). Default is OFF.
# Boost_USE_STLPORT - Set to ON to use libraries compiled with
# STLPort ('p' tag). Default is OFF.
# Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
# - Set to ON to use libraries compiled with
# STLPort deprecated "native iostreams"
# ('n' tag). Default is OFF.
# Boost_COMPILER - Set to the compiler-specific library suffix
# (e.g. "-gcc43"). Default is auto-computed
# for the C++ compiler in use.
# Boost_THREADAPI - Suffix for "thread" component library name,
# such as "pthread" or "win32". Names with
# and without this suffix will both be tried.
# Other variables one may set to control this module are:
# Boost_DEBUG - Set to ON to enable debug output from FindBoost.
# Please enable this before filing any bug report.
# Boost_DETAILED_FAILURE_MSG
# - Set to ON to add detailed information to the
# failure message even when the REQUIRED option
# is not given to the find_package call.
# Boost_REALPATH - Set to ON to resolve symlinks for discovered
# libraries to assist with packaging. For example,
# the "system" component library may be resolved to
# "/usr/lib/libboost_system.so.1.42.0" instead of
# "/usr/lib/libboost_system.so". This does not
# affect linking and should not be enabled unless
# the user needs this information.
# On Visual Studio and Borland compilers Boost headers request automatic
# linking to corresponding libraries. This requires matching libraries to be
# linked explicitly or available in the link library search path. In this
# case setting Boost_USE_STATIC_LIBS to OFF may not achieve dynamic linking.
# Boost automatic linking typically requests static libraries with a few
# exceptions (such as Boost.Python). Use
# add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
# to ask Boost to report information about automatic linking requests.
#
# Example to find Boost headers only:
# find_package(Boost 1.36.0)
# if(Boost_FOUND)
# include_directories(${Boost_INCLUDE_DIRS})
# add_executable(foo foo.cc)
# endif()
# Example to find Boost headers and some libraries:
# set(Boost_USE_STATIC_LIBS ON)
# set(Boost_USE_MULTITHREADED ON)
# set(Boost_USE_STATIC_RUNTIME OFF)
# find_package(Boost 1.36.0 COMPONENTS date_time filesystem system ...)
# if(Boost_FOUND)
# include_directories(${Boost_INCLUDE_DIRS})
# add_executable(foo foo.cc)
# target_link_libraries(foo ${Boost_LIBRARIES})
# endif()
#
# Boost CMake ----------------------------------------------------------
#
# If Boost was built using the boost-cmake project it provides a package
# configuration file for use with find_package's Config mode. This module
# looks for the package configuration file called BoostConfig.cmake or
# boost-config.cmake and stores the result in cache entry "Boost_DIR". If
# found, the package configuration file is loaded and this module returns with
# no further action. See documentation of the Boost CMake package
# configuration for details on what it provides.
#
# Set Boost_NO_BOOST_CMAKE to ON to disable the search for boost-cmake.
#=============================================================================
# Copyright 2006-2012 Kitware, Inc.
# Copyright 2006-2008 Andreas Schneider <mail@cynapses.org>
# Copyright 2007 Wengo
# Copyright 2007 Mike Jackson
# Copyright 2008 Andreas Pakulat <apaku@gmx.de>
# Copyright 2008-2012 Philip Lowman <philip@yhbt.com>
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
#-------------------------------------------------------------------------------
# Before we go searching, check whether boost-cmake is available, unless the
# user specifically asked NOT to search for boost-cmake.
#
# If Boost_DIR is set, this behaves as any find_package call would. If not,
# it looks at BOOST_ROOT and BOOSTROOT to find Boost.
#
if (NOT Boost_NO_BOOST_CMAKE)
# If Boost_DIR is not set, look for BOOSTROOT and BOOST_ROOT as alternatives,
# since these are more conventional for Boost.
if ("$ENV{Boost_DIR}" STREQUAL "")
if (NOT "$ENV{BOOST_ROOT}" STREQUAL "")
set(ENV{Boost_DIR} $ENV{BOOST_ROOT})
elseif (NOT "$ENV{BOOSTROOT}" STREQUAL "")
set(ENV{Boost_DIR} $ENV{BOOSTROOT})
endif()
endif()
# Do the same find_package call but look specifically for the CMake version.
# Note that args are passed in the Boost_FIND_xxxxx variables, so there is no
# need to delegate them to this find_package call.
find_package(Boost QUIET NO_MODULE)
mark_as_advanced(Boost_DIR)
# If we found boost-cmake, then we're done. Print out what we found.
# Otherwise let the rest of the module try to find it.
if (Boost_FOUND)
message("Boost ${Boost_FIND_VERSION} found.")
if (Boost_FIND_COMPONENTS)
message("Found Boost components:")
message(" ${Boost_FIND_COMPONENTS}")
endif()
return()
endif()
endif()
#-------------------------------------------------------------------------------
# FindBoost functions & macros
#
############################################
#
# Check the existence of the libraries.
#
############################################
# This macro was taken directly from the FindQt4.cmake file that is included
# with the CMake distribution. This is NOT my work. All work was done by the
# original authors of the FindQt4.cmake file. Only minor modifications were
# made to remove references to Qt and make this file more generally applicable
# And ELSE/ENDIF pairs were removed for readability.
#########################################################################
macro(_Boost_ADJUST_LIB_VARS basename)
if(Boost_INCLUDE_DIR )
if(Boost_${basename}_LIBRARY_DEBUG AND Boost_${basename}_LIBRARY_RELEASE)
# if the generator supports configuration types then set
# optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
if(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
set(Boost_${basename}_LIBRARY optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
else()
# if there are no configuration types and CMAKE_BUILD_TYPE has no value
# then just use the release libraries
set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_RELEASE} )
endif()
# FIXME: This probably should be set for both cases
set(Boost_${basename}_LIBRARIES optimized ${Boost_${basename}_LIBRARY_RELEASE} debug ${Boost_${basename}_LIBRARY_DEBUG})
endif()
# if only the release version was found, set the debug variable also to the release version
if(Boost_${basename}_LIBRARY_RELEASE AND NOT Boost_${basename}_LIBRARY_DEBUG)
set(Boost_${basename}_LIBRARY_DEBUG ${Boost_${basename}_LIBRARY_RELEASE})
set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_RELEASE})
set(Boost_${basename}_LIBRARIES ${Boost_${basename}_LIBRARY_RELEASE})
endif()
# if only the debug version was found, set the release variable also to the debug version
if(Boost_${basename}_LIBRARY_DEBUG AND NOT Boost_${basename}_LIBRARY_RELEASE)
set(Boost_${basename}_LIBRARY_RELEASE ${Boost_${basename}_LIBRARY_DEBUG})
set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_DEBUG})
set(Boost_${basename}_LIBRARIES ${Boost_${basename}_LIBRARY_DEBUG})
endif()
# If the debug & release library ends up being the same, omit the keywords
if(${Boost_${basename}_LIBRARY_RELEASE} STREQUAL ${Boost_${basename}_LIBRARY_DEBUG})
set(Boost_${basename}_LIBRARY ${Boost_${basename}_LIBRARY_RELEASE} )
set(Boost_${basename}_LIBRARIES ${Boost_${basename}_LIBRARY_RELEASE} )
endif()
if(Boost_${basename}_LIBRARY)
set(Boost_${basename}_FOUND ON)
endif()
endif()
# Make variables changeable to the advanced user
mark_as_advanced(
Boost_${basename}_LIBRARY_RELEASE
Boost_${basename}_LIBRARY_DEBUG
)
endmacro()
macro(_Boost_CHANGE_DETECT changed_var)
set(${changed_var} 0)
foreach(v ${ARGN})
if(DEFINED _Boost_COMPONENTS_SEARCHED)
if(${v})
if(_${v}_LAST)
string(COMPARE NOTEQUAL "${${v}}" "${_${v}_LAST}" _${v}_CHANGED)
else()
set(_${v}_CHANGED 1)
endif()
elseif(_${v}_LAST)
set(_${v}_CHANGED 1)
endif()
if(_${v}_CHANGED)
set(${changed_var} 1)
endif()
else()
set(_${v}_CHANGED 0)
endif()
endforeach()
endmacro()
macro(_Boost_FIND_LIBRARY var)
find_library(${var} ${ARGN})
if(${var})
# If this is the first library found then save Boost_LIBRARY_DIR.
if(NOT Boost_LIBRARY_DIR)
get_filename_component(_dir "${${var}}" PATH)
set(Boost_LIBRARY_DIR "${_dir}" CACHE PATH "Boost library directory" FORCE)
endif()
elseif(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
# Try component-specific hints but do not save Boost_LIBRARY_DIR.
find_library(${var} HINTS ${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT} ${ARGN})
endif()
# If Boost_LIBRARY_DIR is known then search only there.
if(Boost_LIBRARY_DIR)
set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH)
endif()
endmacro()
#-------------------------------------------------------------------------------
#
# Runs compiler with "-dumpversion" and parses major/minor
# version with a regex.
#
function(_Boost_COMPILER_DUMPVERSION _OUTPUT_VERSION)
exec_program(${CMAKE_CXX_COMPILER}
ARGS ${CMAKE_CXX_COMPILER_ARG1} -dumpversion
OUTPUT_VARIABLE _boost_COMPILER_VERSION
)
string(REGEX REPLACE "([0-9])\\.([0-9])(\\.[0-9])?" "\\1\\2"
_boost_COMPILER_VERSION ${_boost_COMPILER_VERSION})
set(${_OUTPUT_VERSION} ${_boost_COMPILER_VERSION} PARENT_SCOPE)
endfunction()
#
# Take a list of libraries with "thread" in it
# and prepend duplicates with "thread_${Boost_THREADAPI}"
# at the front of the list
#
function(_Boost_PREPEND_LIST_WITH_THREADAPI _output)
set(_orig_libnames ${ARGN})
string(REPLACE "thread" "thread_${Boost_THREADAPI}" _threadapi_libnames "${_orig_libnames}")
set(${_output} ${_threadapi_libnames} ${_orig_libnames} PARENT_SCOPE)
endfunction()
#
# If a library is found, replace its cache entry with its REALPATH
#
function(_Boost_SWAP_WITH_REALPATH _library _docstring)
if(${_library})
get_filename_component(_boost_filepathreal ${${_library}} REALPATH)
unset(${_library} CACHE)
set(${_library} ${_boost_filepathreal} CACHE FILEPATH "${_docstring}")
endif()
endfunction()
function(_Boost_CHECK_SPELLING _var)
if(${_var})
string(TOUPPER ${_var} _var_UC)
message(FATAL_ERROR "ERROR: ${_var} is not the correct spelling. The proper spelling is ${_var_UC}.")
endif()
endfunction()
# Guesses Boost's compiler prefix used in built library names
# Returns the guess by setting the variable pointed to by _ret
function(_Boost_GUESS_COMPILER_PREFIX _ret)
if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Intel"
OR "${CMAKE_CXX_COMPILER}" MATCHES "icl"
OR "${CMAKE_CXX_COMPILER}" MATCHES "icpc")
if(WIN32)
set (_boost_COMPILER "-iw")
else()
set (_boost_COMPILER "-il")
endif()
elseif (MSVC12)
set(_boost_COMPILER "-vc120")
elseif (MSVC11)
set(_boost_COMPILER "-vc110")
elseif (MSVC10)
set(_boost_COMPILER "-vc100")
elseif (MSVC90)
set(_boost_COMPILER "-vc90")
elseif (MSVC80)
set(_boost_COMPILER "-vc80")
elseif (MSVC71)
set(_boost_COMPILER "-vc71")
elseif (MSVC70) # Good luck!
set(_boost_COMPILER "-vc7") # yes, this is correct
elseif (MSVC60) # Good luck!
set(_boost_COMPILER "-vc6") # yes, this is correct
elseif (BORLAND)
set(_boost_COMPILER "-bcb")
elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "SunPro")
set(_boost_COMPILER "-sw")
elseif (MINGW)
if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
set(_boost_COMPILER "-mgw") # no GCC version encoding prior to 1.34
else()
_Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
set(_boost_COMPILER "-mgw${_boost_COMPILER_VERSION}")
endif()
elseif (UNIX)
if (CMAKE_COMPILER_IS_GNUCXX)
if(${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION} VERSION_LESS 1.34)
set(_boost_COMPILER "-gcc") # no GCC version encoding prior to 1.34
else()
_Boost_COMPILER_DUMPVERSION(_boost_COMPILER_VERSION)
# Determine which version of GCC we have.
if(APPLE)
if(Boost_MINOR_VERSION)
if(${Boost_MINOR_VERSION} GREATER 35)
# In Boost 1.36.0 and newer, the mangled compiler name used
# on Mac OS X/Darwin is "xgcc".
set(_boost_COMPILER "-xgcc${_boost_COMPILER_VERSION}")
else()
# In Boost <= 1.35.0, there is no mangled compiler name for
# the Mac OS X/Darwin version of GCC.
set(_boost_COMPILER "")
endif()
else()
# We don't know the Boost version, so assume it's
# pre-1.36.0.
set(_boost_COMPILER "")
endif()
else()
set(_boost_COMPILER "-gcc${_boost_COMPILER_VERSION}")
endif()
endif()
endif ()
else()
# TODO at least Boost_DEBUG here?
set(_boost_COMPILER "")
endif()
set(${_ret} ${_boost_COMPILER} PARENT_SCOPE)
endfunction()
#
# End functions/macros
#
#-------------------------------------------------------------------------------
#-------------------------------------------------------------------------------
# main.
#-------------------------------------------------------------------------------
if(NOT DEFINED Boost_USE_MULTITHREADED)
set(Boost_USE_MULTITHREADED TRUE)
endif()
# Check the version of Boost against the requested version.
if(Boost_FIND_VERSION AND NOT Boost_FIND_VERSION_MINOR)
message(SEND_ERROR "When requesting a specific version of Boost, you must provide at least the major and minor version numbers, e.g., 1.34")
endif()
if(Boost_FIND_VERSION_EXACT)
# The version may appear in a directory with or without the patch
# level, even when the patch level is non-zero.
set(_boost_TEST_VERSIONS
"${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}.${Boost_FIND_VERSION_PATCH}"
"${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
else()
# The user has not requested an exact version. Among known
# versions, find those that are acceptable to the user request.
set(_Boost_KNOWN_VERSIONS ${Boost_ADDITIONAL_VERSIONS}
"1.56.0" "1.56" "1.55.0" "1.55" "1.54.0" "1.54"
"1.53.0" "1.53" "1.52.0" "1.52" "1.51.0" "1.51"
"1.50.0" "1.50" "1.49.0" "1.49" "1.48.0" "1.48" "1.47.0" "1.47" "1.46.1"
"1.46.0" "1.46" "1.45.0" "1.45" "1.44.0" "1.44" "1.43.0" "1.43" "1.42.0" "1.42"
"1.41.0" "1.41" "1.40.0" "1.40" "1.39.0" "1.39" "1.38.0" "1.38" "1.37.0" "1.37"
"1.36.1" "1.36.0" "1.36" "1.35.1" "1.35.0" "1.35" "1.34.1" "1.34.0"
"1.34" "1.33.1" "1.33.0" "1.33")
set(_boost_TEST_VERSIONS)
if(Boost_FIND_VERSION)
set(_Boost_FIND_VERSION_SHORT "${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
# Select acceptable versions.
foreach(version ${_Boost_KNOWN_VERSIONS})
if(NOT "${version}" VERSION_LESS "${Boost_FIND_VERSION}")
# This version is high enough.
list(APPEND _boost_TEST_VERSIONS "${version}")
elseif("${version}.99" VERSION_EQUAL "${_Boost_FIND_VERSION_SHORT}.99")
# This version is a short-form for the requested version with
# the patch level dropped.
list(APPEND _boost_TEST_VERSIONS "${version}")
endif()
endforeach()
else()
# Any version is acceptable.
set(_boost_TEST_VERSIONS "${_Boost_KNOWN_VERSIONS}")
endif()
endif()
# The reason that we failed to find Boost. This will be set to a
# user-friendly message when we fail to find some necessary piece of
# Boost.
set(Boost_ERROR_REASON)
if(Boost_DEBUG)
# Output some of their choices
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Boost_USE_MULTITHREADED = ${Boost_USE_MULTITHREADED}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Boost_USE_STATIC_LIBS = ${Boost_USE_STATIC_LIBS}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Boost_USE_STATIC_RUNTIME = ${Boost_USE_STATIC_RUNTIME}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Boost_ADDITIONAL_VERSIONS = ${Boost_ADDITIONAL_VERSIONS}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Boost_NO_SYSTEM_PATHS = ${Boost_NO_SYSTEM_PATHS}")
endif()
if(WIN32)
# In windows, automatic linking is performed, so you do not have
# to specify the libraries. If you are linking to a dynamic
# runtime, then you can choose to link to either a static or a
# dynamic Boost library, the default is to do a static link. You
# can alter this for a specific library "whatever" by defining
# BOOST_WHATEVER_DYN_LINK to force Boost library "whatever" to be
# linked dynamically. Alternatively you can force all Boost
# libraries to dynamic link by defining BOOST_ALL_DYN_LINK.
# This feature can be disabled for Boost library "whatever" by
# defining BOOST_WHATEVER_NO_LIB, or for all of Boost by defining
# BOOST_ALL_NO_LIB.
# If you want to observe which libraries are being linked against
# then defining BOOST_LIB_DIAGNOSTIC will cause the auto-linking
# code to emit a #pragma message each time a library is selected
# for linking.
set(Boost_LIB_DIAGNOSTIC_DEFINITIONS "-DBOOST_LIB_DIAGNOSTIC")
endif()
_Boost_CHECK_SPELLING(Boost_ROOT)
_Boost_CHECK_SPELLING(Boost_LIBRARYDIR)
_Boost_CHECK_SPELLING(Boost_INCLUDEDIR)
# Collect environment variable inputs as hints. Do not consider changes.
foreach(v BOOSTROOT BOOST_ROOT BOOST_INCLUDEDIR BOOST_LIBRARYDIR)
set(_env $ENV{${v}})
if(_env)
file(TO_CMAKE_PATH "${_env}" _ENV_${v})
else()
set(_ENV_${v} "")
endif()
endforeach()
if(NOT _ENV_BOOST_ROOT AND _ENV_BOOSTROOT)
set(_ENV_BOOST_ROOT "${_ENV_BOOSTROOT}")
endif()
# Collect inputs and cached results. Detect changes since the last run.
if(NOT BOOST_ROOT AND BOOSTROOT)
set(BOOST_ROOT "${BOOSTROOT}")
endif()
set(_Boost_VARS_DIR
BOOST_ROOT
Boost_NO_SYSTEM_PATHS
)
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Declared as CMake or Environmental Variables:")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
" BOOST_ROOT = ${BOOST_ROOT}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
" BOOST_INCLUDEDIR = ${BOOST_INCLUDEDIR}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
" BOOST_LIBRARYDIR = ${BOOST_LIBRARYDIR}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_TEST_VERSIONS = ${_boost_TEST_VERSIONS}")
endif()
# ------------------------------------------------------------------------
# Search for Boost include DIR
# ------------------------------------------------------------------------
set(_Boost_VARS_INC BOOST_INCLUDEDIR Boost_INCLUDE_DIR Boost_ADDITIONAL_VERSIONS)
_Boost_CHANGE_DETECT(_Boost_CHANGE_INCDIR ${_Boost_VARS_DIR} ${_Boost_VARS_INC})
# Clear Boost_INCLUDE_DIR if it did not change but other input affecting the
# location did. We will find a new one based on the new inputs.
if(_Boost_CHANGE_INCDIR AND NOT _Boost_INCLUDE_DIR_CHANGED)
unset(Boost_INCLUDE_DIR CACHE)
endif()
if(NOT Boost_INCLUDE_DIR)
set(_boost_INCLUDE_SEARCH_DIRS "")
if(BOOST_INCLUDEDIR)
list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_INCLUDEDIR})
elseif(_ENV_BOOST_INCLUDEDIR)
list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_INCLUDEDIR})
endif()
if( BOOST_ROOT )
list(APPEND _boost_INCLUDE_SEARCH_DIRS ${BOOST_ROOT}/include ${BOOST_ROOT})
elseif( _ENV_BOOST_ROOT )
list(APPEND _boost_INCLUDE_SEARCH_DIRS ${_ENV_BOOST_ROOT}/include ${_ENV_BOOST_ROOT})
endif()
if( Boost_NO_SYSTEM_PATHS)
list(APPEND _boost_INCLUDE_SEARCH_DIRS NO_CMAKE_SYSTEM_PATH)
else()
list(APPEND _boost_INCLUDE_SEARCH_DIRS PATHS
C:/boost/include
C:/boost
/sw/local/include
)
endif()
# Try to find Boost by stepping backwards through the Boost versions
# we know about.
# Build a list of path suffixes for each version.
set(_boost_PATH_SUFFIXES)
foreach(_boost_VER ${_boost_TEST_VERSIONS})
# Add in a path suffix, based on the required version, ideally
# we could read this from version.hpp, but for that to work we'd
# need to know the include dir already
set(_boost_BOOSTIFIED_VERSION)
# Transform 1.35 => 1_35 and 1.36.0 => 1_36_0
if(_boost_VER MATCHES "[0-9]+\\.[0-9]+\\.[0-9]+")
string(REGEX REPLACE "([0-9]+)\\.([0-9]+)\\.([0-9]+)" "\\1_\\2_\\3"
_boost_BOOSTIFIED_VERSION ${_boost_VER})
elseif(_boost_VER MATCHES "[0-9]+\\.[0-9]+")
string(REGEX REPLACE "([0-9]+)\\.([0-9]+)" "\\1_\\2"
_boost_BOOSTIFIED_VERSION ${_boost_VER})
endif()
list(APPEND _boost_PATH_SUFFIXES
"boost-${_boost_BOOSTIFIED_VERSION}"
"boost_${_boost_BOOSTIFIED_VERSION}"
"boost/boost-${_boost_BOOSTIFIED_VERSION}"
"boost/boost_${_boost_BOOSTIFIED_VERSION}"
)
endforeach()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Include debugging info:")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
" _boost_INCLUDE_SEARCH_DIRS = ${_boost_INCLUDE_SEARCH_DIRS}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
" _boost_PATH_SUFFIXES = ${_boost_PATH_SUFFIXES}")
endif()
# Look for a standard boost header file.
find_path(Boost_INCLUDE_DIR
NAMES boost/config.hpp
HINTS ${_boost_INCLUDE_SEARCH_DIRS}
PATH_SUFFIXES ${_boost_PATH_SUFFIXES}
)
endif()
# ------------------------------------------------------------------------
# Extract version information from version.hpp
# ------------------------------------------------------------------------
# Set Boost_FOUND based only on header location and version.
# It will be updated below for component libraries.
if(Boost_INCLUDE_DIR)
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"location of version.hpp: ${Boost_INCLUDE_DIR}/boost/version.hpp")
endif()
# Extract Boost_VERSION and Boost_LIB_VERSION from version.hpp
set(Boost_VERSION 0)
set(Boost_LIB_VERSION "")
file(STRINGS "${Boost_INCLUDE_DIR}/boost/version.hpp" _boost_VERSION_HPP_CONTENTS REGEX "#define BOOST_(LIB_)?VERSION ")
set(_Boost_VERSION_REGEX "([0-9]+)")
set(_Boost_LIB_VERSION_REGEX "\"([0-9_]+)\"")
foreach(v VERSION LIB_VERSION)
if("${_boost_VERSION_HPP_CONTENTS}" MATCHES ".*#define BOOST_${v} ${_Boost_${v}_REGEX}.*")
set(Boost_${v} "${CMAKE_MATCH_1}")
endif()
endforeach()
unset(_boost_VERSION_HPP_CONTENTS)
math(EXPR Boost_MAJOR_VERSION "${Boost_VERSION} / 100000")
math(EXPR Boost_MINOR_VERSION "${Boost_VERSION} / 100 % 1000")
math(EXPR Boost_SUBMINOR_VERSION "${Boost_VERSION} % 100")
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}\nBoost include path: ${Boost_INCLUDE_DIR}")
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"version.hpp reveals boost "
"${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
endif()
if(Boost_FIND_VERSION)
# Set Boost_FOUND based on requested version.
set(_Boost_VERSION "${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
if("${_Boost_VERSION}" VERSION_LESS "${Boost_FIND_VERSION}")
set(Boost_FOUND 0)
set(_Boost_VERSION_AGE "old")
elseif(Boost_FIND_VERSION_EXACT AND
NOT "${_Boost_VERSION}" VERSION_EQUAL "${Boost_FIND_VERSION}")
set(Boost_FOUND 0)
set(_Boost_VERSION_AGE "new")
else()
set(Boost_FOUND 1)
endif()
if(NOT Boost_FOUND)
# State that we found a version of Boost that is too new or too old.
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}\nDetected version of Boost is too ${_Boost_VERSION_AGE}. Requested version was ${Boost_FIND_VERSION_MAJOR}.${Boost_FIND_VERSION_MINOR}")
if (Boost_FIND_VERSION_PATCH)
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}.${Boost_FIND_VERSION_PATCH}")
endif ()
if (NOT Boost_FIND_VERSION_EXACT)
set(Boost_ERROR_REASON "${Boost_ERROR_REASON} (or newer)")
endif ()
set(Boost_ERROR_REASON "${Boost_ERROR_REASON}.")
endif ()
else()
# Caller will accept any Boost version.
set(Boost_FOUND 1)
endif()
else()
set(Boost_FOUND 0)
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}Unable to find the Boost header files. Please set BOOST_ROOT to the root directory containing Boost or BOOST_INCLUDEDIR to the directory containing Boost's headers.")
endif()
# ------------------------------------------------------------------------
# Suffix initialization and compiler suffix detection.
# ------------------------------------------------------------------------
set(_Boost_VARS_NAME
Boost_COMPILER
Boost_THREADAPI
Boost_USE_DEBUG_PYTHON
Boost_USE_MULTITHREADED
Boost_USE_STATIC_LIBS
Boost_USE_STATIC_RUNTIME
Boost_USE_STLPORT
Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
)
_Boost_CHANGE_DETECT(_Boost_CHANGE_LIBNAME ${_Boost_VARS_NAME})
# Setting some more suffixes for the library
set(Boost_LIB_PREFIX "")
if ( WIN32 AND Boost_USE_STATIC_LIBS AND NOT CYGWIN)
set(Boost_LIB_PREFIX "lib")
endif()
if (Boost_COMPILER)
set(_boost_COMPILER ${Boost_COMPILER})
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"using user-specified Boost_COMPILER = ${_boost_COMPILER}")
endif()
else()
# Attempt to guess the compiler suffix
# NOTE: this is not perfect yet, if you experience any issues
# please report them and use the Boost_COMPILER variable
# to work around the problems.
_Boost_GUESS_COMPILER_PREFIX(_boost_COMPILER)
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"guessed _boost_COMPILER = ${_boost_COMPILER}")
endif()
endif()
set (_boost_MULTITHREADED "-mt")
if( NOT Boost_USE_MULTITHREADED )
set (_boost_MULTITHREADED "")
endif()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_MULTITHREADED = ${_boost_MULTITHREADED}")
endif()
#======================
# Systematically build up the Boost ABI tag
# http://boost.org/doc/libs/1_41_0/more/getting_started/windows.html#library-naming
set( _boost_RELEASE_ABI_TAG "-")
set( _boost_DEBUG_ABI_TAG "-")
# Key Use this library when:
# s linking statically to the C++ standard library and
# compiler runtime support libraries.
if(Boost_USE_STATIC_RUNTIME)
set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}s")
set( _boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}s")
endif()
# g using debug versions of the standard and runtime
# support libraries
if(WIN32)
if(MSVC OR "${CMAKE_CXX_COMPILER}" MATCHES "icl"
OR "${CMAKE_CXX_COMPILER}" MATCHES "icpc")
set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}g")
endif()
endif()
# y using special debug build of python
if(Boost_USE_DEBUG_PYTHON)
set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}y")
endif()
# d using a debug version of your code
set(_boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}d")
# p using the STLport standard library rather than the
# default one supplied with your compiler
if(Boost_USE_STLPORT)
set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}p")
set( _boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}p")
endif()
# n using the STLport deprecated "native iostreams" feature
if(Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS)
set( _boost_RELEASE_ABI_TAG "${_boost_RELEASE_ABI_TAG}n")
set( _boost_DEBUG_ABI_TAG "${_boost_DEBUG_ABI_TAG}n")
endif()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_RELEASE_ABI_TAG = ${_boost_RELEASE_ABI_TAG}")
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_DEBUG_ABI_TAG = ${_boost_DEBUG_ABI_TAG}")
endif()
# ------------------------------------------------------------------------
# Begin finding boost libraries
# ------------------------------------------------------------------------
set(_Boost_VARS_LIB BOOST_LIBRARYDIR Boost_LIBRARY_DIR)
_Boost_CHANGE_DETECT(_Boost_CHANGE_LIBDIR ${_Boost_VARS_DIR} ${_Boost_VARS_LIB} Boost_INCLUDE_DIR)
# Clear Boost_LIBRARY_DIR if it did not change but other input affecting the
# location did. We will find a new one based on the new inputs.
if(_Boost_CHANGE_LIBDIR AND NOT _Boost_LIBRARY_DIR_CHANGED)
unset(Boost_LIBRARY_DIR CACHE)
endif()
if(Boost_LIBRARY_DIR)
set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH)
else()
set(_boost_LIBRARY_SEARCH_DIRS "")
if(BOOST_LIBRARYDIR)
list(APPEND _boost_LIBRARY_SEARCH_DIRS ${BOOST_LIBRARYDIR})
elseif(_ENV_BOOST_LIBRARYDIR)
list(APPEND _boost_LIBRARY_SEARCH_DIRS ${_ENV_BOOST_LIBRARYDIR})
endif()
if(BOOST_ROOT)
list(APPEND _boost_LIBRARY_SEARCH_DIRS ${BOOST_ROOT}/lib ${BOOST_ROOT}/stage/lib)
elseif(_ENV_BOOST_ROOT)
list(APPEND _boost_LIBRARY_SEARCH_DIRS ${_ENV_BOOST_ROOT}/lib ${_ENV_BOOST_ROOT}/stage/lib)
endif()
list(APPEND _boost_LIBRARY_SEARCH_DIRS
${Boost_INCLUDE_DIR}/lib
${Boost_INCLUDE_DIR}/../lib
${Boost_INCLUDE_DIR}/stage/lib
)
if( Boost_NO_SYSTEM_PATHS )
list(APPEND _boost_LIBRARY_SEARCH_DIRS NO_CMAKE_SYSTEM_PATH)
else()
list(APPEND _boost_LIBRARY_SEARCH_DIRS PATHS
C:/boost/lib
C:/boost
/sw/local/lib
)
endif()
endif()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"_boost_LIBRARY_SEARCH_DIRS = ${_boost_LIBRARY_SEARCH_DIRS}")
endif()
# Support preference of static libs by adjusting CMAKE_FIND_LIBRARY_SUFFIXES
if( Boost_USE_STATIC_LIBS )
set( _boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
if(WIN32)
set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
else()
set(CMAKE_FIND_LIBRARY_SUFFIXES .a )
endif()
endif()
# We want to use the tag inline below without risking double dashes
if(_boost_RELEASE_ABI_TAG)
if(${_boost_RELEASE_ABI_TAG} STREQUAL "-")
set(_boost_RELEASE_ABI_TAG "")
endif()
endif()
if(_boost_DEBUG_ABI_TAG)
if(${_boost_DEBUG_ABI_TAG} STREQUAL "-")
set(_boost_DEBUG_ABI_TAG "")
endif()
endif()
# The previous behavior of FindBoost when Boost_USE_STATIC_LIBS was enabled
# on WIN32 was to:
# 1. Search for static libs compiled against a SHARED C++ standard runtime library (use if found)
# 2. Search for static libs compiled against a STATIC C++ standard runtime library (use if found)
# We maintain this behavior since changing it could break people's builds.
# To disable the ambiguous behavior, the user need only
# set Boost_USE_STATIC_RUNTIME either ON or OFF.
set(_boost_STATIC_RUNTIME_WORKAROUND false)
if(WIN32 AND Boost_USE_STATIC_LIBS)
if(NOT DEFINED Boost_USE_STATIC_RUNTIME)
set(_boost_STATIC_RUNTIME_WORKAROUND true)
endif()
endif()
# On versions < 1.35, remove the System library from the considered list
# since it wasn't added until 1.35.
if(Boost_VERSION AND Boost_FIND_COMPONENTS)
if(Boost_VERSION LESS 103500)
list(REMOVE_ITEM Boost_FIND_COMPONENTS system)
endif()
endif()
# If the user changed any of our control inputs flush previous results.
if(_Boost_CHANGE_LIBDIR OR _Boost_CHANGE_LIBNAME)
foreach(COMPONENT ${_Boost_COMPONENTS_SEARCHED})
string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
foreach(c DEBUG RELEASE)
set(_var Boost_${UPPERCOMPONENT}_LIBRARY_${c})
unset(${_var} CACHE)
set(${_var} "${_var}-NOTFOUND")
endforeach()
endforeach()
set(_Boost_COMPONENTS_SEARCHED "")
endif()
foreach(COMPONENT ${Boost_FIND_COMPONENTS})
string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
set( _boost_docstring_release "Boost ${COMPONENT} library (release)")
set( _boost_docstring_debug "Boost ${COMPONENT} library (debug)")
# Compute component-specific hints.
set(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT "")
if(${COMPONENT} STREQUAL "mpi" OR ${COMPONENT} STREQUAL "mpi_python")
foreach(lib ${MPI_CXX_LIBRARIES} ${MPI_C_LIBRARIES})
if(IS_ABSOLUTE "${lib}")
get_filename_component(libdir "${lib}" PATH)
string(REPLACE "\\" "/" libdir "${libdir}")
list(APPEND _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT ${libdir})
endif()
endforeach()
endif()
# Consolidate and report component-specific hints.
if(_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
list(REMOVE_DUPLICATES _Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT)
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Component-specific library search paths for ${COMPONENT}: "
"${_Boost_FIND_LIBRARY_HINTS_FOR_COMPONENT}")
endif()
endif()
#
# Find RELEASE libraries
#
set(_boost_RELEASE_NAMES
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT} )
if(_boost_STATIC_RUNTIME_WORKAROUND)
set(_boost_RELEASE_STATIC_ABI_TAG "-s${_boost_RELEASE_ABI_TAG}")
list(APPEND _boost_RELEASE_NAMES
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_RELEASE_STATIC_ABI_TAG} )
endif()
if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
_Boost_PREPEND_LIST_WITH_THREADAPI(_boost_RELEASE_NAMES ${_boost_RELEASE_NAMES})
endif()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Searching for ${UPPERCOMPONENT}_LIBRARY_RELEASE: ${_boost_RELEASE_NAMES}")
endif()
# Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS}")
_Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE
NAMES ${_boost_RELEASE_NAMES}
HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
NAMES_PER_DIR
DOC "${_boost_docstring_release}"
)
#
# Find DEBUG libraries
#
set(_boost_DEBUG_NAMES
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}
${Boost_LIB_PREFIX}boost_${COMPONENT} )
if(_boost_STATIC_RUNTIME_WORKAROUND)
set(_boost_DEBUG_STATIC_ABI_TAG "-s${_boost_DEBUG_ABI_TAG}")
list(APPEND _boost_DEBUG_NAMES
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_COMPILER}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG}-${Boost_LIB_VERSION}
${Boost_LIB_PREFIX}boost_${COMPONENT}${_boost_MULTITHREADED}${_boost_DEBUG_STATIC_ABI_TAG} )
endif()
if(Boost_THREADAPI AND ${COMPONENT} STREQUAL "thread")
_Boost_PREPEND_LIST_WITH_THREADAPI(_boost_DEBUG_NAMES ${_boost_DEBUG_NAMES})
endif()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] "
"Searching for ${UPPERCOMPONENT}_LIBRARY_DEBUG: ${_boost_DEBUG_NAMES}")
endif()
# Avoid passing backslashes to _Boost_FIND_LIBRARY due to macro re-parsing.
string(REPLACE "\\" "/" _boost_LIBRARY_SEARCH_DIRS_tmp "${_boost_LIBRARY_SEARCH_DIRS}")
_Boost_FIND_LIBRARY(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG
NAMES ${_boost_DEBUG_NAMES}
HINTS ${_boost_LIBRARY_SEARCH_DIRS_tmp}
NAMES_PER_DIR
DOC "${_boost_docstring_debug}"
)
if(Boost_REALPATH)
_Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_RELEASE "${_boost_docstring_release}")
_Boost_SWAP_WITH_REALPATH(Boost_${UPPERCOMPONENT}_LIBRARY_DEBUG "${_boost_docstring_debug}" )
endif()
_Boost_ADJUST_LIB_VARS(${UPPERCOMPONENT})
endforeach()
# Restore the original find library ordering
if( Boost_USE_STATIC_LIBS )
set(CMAKE_FIND_LIBRARY_SUFFIXES ${_boost_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES})
endif()
# ------------------------------------------------------------------------
# End finding boost libraries
# ------------------------------------------------------------------------
set(Boost_INCLUDE_DIRS ${Boost_INCLUDE_DIR})
set(Boost_LIBRARY_DIRS ${Boost_LIBRARY_DIR})
# The above setting of Boost_FOUND was based only on the header files.
# Update it for the requested component libraries.
if(Boost_FOUND)
# The headers were found. Check for requested component libs.
set(_boost_CHECKED_COMPONENT FALSE)
set(_Boost_MISSING_COMPONENTS "")
foreach(COMPONENT ${Boost_FIND_COMPONENTS})
string(TOUPPER ${COMPONENT} COMPONENT)
set(_boost_CHECKED_COMPONENT TRUE)
if(NOT Boost_${COMPONENT}_FOUND)
string(TOLOWER ${COMPONENT} COMPONENT)
list(APPEND _Boost_MISSING_COMPONENTS ${COMPONENT})
endif()
endforeach()
if(Boost_DEBUG)
message(STATUS "[ ${CMAKE_CURRENT_LIST_FILE}:${CMAKE_CURRENT_LIST_LINE} ] Boost_FOUND = ${Boost_FOUND}")
endif()
if (_Boost_MISSING_COMPONENTS)
set(Boost_FOUND 0)
# We were unable to find some libraries, so generate a sensible
# error message that lists the libraries we were unable to find.
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}\nCould not find the following")
if(Boost_USE_STATIC_LIBS)
set(Boost_ERROR_REASON "${Boost_ERROR_REASON} static")
endif()
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON} Boost libraries:\n")
foreach(COMPONENT ${_Boost_MISSING_COMPONENTS})
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON} boost_${COMPONENT}\n")
endforeach()
list(LENGTH Boost_FIND_COMPONENTS Boost_NUM_COMPONENTS_WANTED)
list(LENGTH _Boost_MISSING_COMPONENTS Boost_NUM_MISSING_COMPONENTS)
if (${Boost_NUM_COMPONENTS_WANTED} EQUAL ${Boost_NUM_MISSING_COMPONENTS})
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}No Boost libraries were found. You may need to set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
else ()
set(Boost_ERROR_REASON
"${Boost_ERROR_REASON}Some (but not all) of the required Boost libraries were found. You may need to install these additional Boost libraries. Alternatively, set BOOST_LIBRARYDIR to the directory containing Boost libraries or BOOST_ROOT to the location of Boost.")
endif ()
endif ()
if( NOT Boost_LIBRARY_DIRS AND NOT _boost_CHECKED_COMPONENT )
# Compatibility Code for backwards compatibility with CMake
# 2.4's FindBoost module.
# Look for the boost library path.
# Note that the user may not have installed any libraries
# so it is quite possible the Boost_LIBRARY_DIRS may not exist.
set(_boost_LIB_DIR ${Boost_INCLUDE_DIR})
if("${_boost_LIB_DIR}" MATCHES "boost-[0-9]+")
get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
endif()
if("${_boost_LIB_DIR}" MATCHES "/include$")
# Strip off the trailing "/include" in the path.
get_filename_component(_boost_LIB_DIR ${_boost_LIB_DIR} PATH)
endif()
if(EXISTS "${_boost_LIB_DIR}/lib")
set(_boost_LIB_DIR ${_boost_LIB_DIR}/lib)
else()
if(EXISTS "${_boost_LIB_DIR}/stage/lib")
set(_boost_LIB_DIR ${_boost_LIB_DIR}/stage/lib)
else()
set(_boost_LIB_DIR "")
endif()
endif()
if(_boost_LIB_DIR AND EXISTS "${_boost_LIB_DIR}")
set(Boost_LIBRARY_DIRS ${_boost_LIB_DIR})
endif()
endif()
else()
# Boost headers were not found so no components were found.
foreach(COMPONENT ${Boost_FIND_COMPONENTS})
string(TOUPPER ${COMPONENT} UPPERCOMPONENT)
set(Boost_${UPPERCOMPONENT}_FOUND 0)
endforeach()
endif()
# ------------------------------------------------------------------------
# Notification to end user about what was found
# ------------------------------------------------------------------------
set(Boost_LIBRARIES "")
if(Boost_FOUND)
if(NOT Boost_FIND_QUIETLY)
message(STATUS "Boost version: ${Boost_MAJOR_VERSION}.${Boost_MINOR_VERSION}.${Boost_SUBMINOR_VERSION}")
if(Boost_FIND_COMPONENTS)
message(STATUS "Found the following Boost libraries:")
endif()
endif()
foreach( COMPONENT ${Boost_FIND_COMPONENTS} )
string( TOUPPER ${COMPONENT} UPPERCOMPONENT )
if( Boost_${UPPERCOMPONENT}_FOUND )
if(NOT Boost_FIND_QUIETLY)
message (STATUS " ${COMPONENT}")
endif()
list(APPEND Boost_LIBRARIES ${Boost_${UPPERCOMPONENT}_LIBRARY})
endif()
endforeach()
else()
if(Boost_FIND_REQUIRED)
message(SEND_ERROR "Unable to find the requested Boost libraries.\n${Boost_ERROR_REASON}")
else()
if(NOT Boost_FIND_QUIETLY)
# we opt not to automatically output Boost_ERROR_REASON here as
# it could be quite lengthy and somewhat imposing in its requests
# Since Boost is not always a required dependency we'll leave this
# up to the end-user.
if(Boost_DEBUG OR Boost_DETAILED_FAILURE_MSG)
message(STATUS "Could NOT find Boost\n${Boost_ERROR_REASON}")
else()
message(STATUS "Could NOT find Boost")
endif()
endif()
endif()
endif()
# Configure display of cache entries in GUI.
foreach(v BOOSTROOT BOOST_ROOT ${_Boost_VARS_INC} ${_Boost_VARS_LIB})
get_property(_type CACHE ${v} PROPERTY TYPE)
if(_type)
set_property(CACHE ${v} PROPERTY ADVANCED 1)
if("x${_type}" STREQUAL "xUNINITIALIZED")
if("x${v}" STREQUAL "xBoost_ADDITIONAL_VERSIONS")
set_property(CACHE ${v} PROPERTY TYPE STRING)
else()
set_property(CACHE ${v} PROPERTY TYPE PATH)
endif()
endif()
endif()
endforeach()
# Record last used values of input variables so we can
# detect on the next run if the user changed them.
foreach(v
${_Boost_VARS_INC} ${_Boost_VARS_LIB}
${_Boost_VARS_DIR} ${_Boost_VARS_NAME}
)
if(DEFINED ${v})
set(_${v}_LAST "${${v}}" CACHE INTERNAL "Last used ${v} value.")
else()
unset(_${v}_LAST CACHE)
endif()
endforeach()
# Maintain a persistent list of components requested anywhere since
# the last flush.
set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}")
list(APPEND _Boost_COMPONENTS_SEARCHED ${Boost_FIND_COMPONENTS})
list(REMOVE_DUPLICATES _Boost_COMPONENTS_SEARCHED)
list(SORT _Boost_COMPONENTS_SEARCHED)
set(_Boost_COMPONENTS_SEARCHED "${_Boost_COMPONENTS_SEARCHED}"
CACHE INTERNAL "Components requested for this build tree.")