system: Linux mars.sprixweb.com 3.10.0-1160.119.1.el7.x86_64 #1 SMP Tue Jun 4 14:43:51 UTC 2024 x86_64
| Direktori : /usr/bin/ |
|
|
| Current File : //usr/bin/pt-heartbeat |
#!/usr/bin/env perl
# This program is part of Percona Toolkit: http://www.percona.com/software/
# See "COPYRIGHT, LICENSE, AND WARRANTY" at the end of this file for legal
# notices and disclaimers.
use strict;
use warnings FATAL => 'all';
# This tool is "fat-packed": most of its dependent modules are embedded
# in this file. Setting %INC to this file for each module makes Perl aware
# of this so it will not try to load the module from @INC. See the tool's
# documentation for a full list of dependencies.
BEGIN {
$INC{$_} = __FILE__ for map { (my $pkg = "$_.pm") =~ s!::!/!g; $pkg } (qw(
Percona::Toolkit
MasterSlave
OptionParser
DSNParser
Daemon
Quoter
TableParser
Retry
Transformers
HTTP::Micro
VersionCheck
));
}
# ###########################################################################
# Percona::Toolkit package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/Percona/Toolkit.pm
# t/lib/Percona/Toolkit.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package Percona::Toolkit;
our $VERSION = '2.2.15';
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Carp qw(carp cluck);
use Data::Dumper qw();
require Exporter;
our @ISA = qw(Exporter);
our @EXPORT_OK = qw(
have_required_args
Dumper
_d
);
sub have_required_args {
my ($args, @required_args) = @_;
my $have_required_args = 1;
foreach my $arg ( @required_args ) {
if ( !defined $args->{$arg} ) {
$have_required_args = 0;
carp "Argument $arg is not defined";
}
}
cluck unless $have_required_args; # print backtrace
return $have_required_args;
}
sub Dumper {
local $Data::Dumper::Indent = 1;
local $Data::Dumper::Sortkeys = 1;
local $Data::Dumper::Quotekeys = 0;
Data::Dumper::Dumper(@_);
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End Percona::Toolkit package
# ###########################################################################
# ###########################################################################
# MasterSlave package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/MasterSlave.pm
# t/lib/MasterSlave.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package MasterSlave;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
sub check_recursion_method {
my ($methods) = @_;
if ( @$methods != 1 ) {
if ( grep({ !m/processlist|hosts/i } @$methods)
&& $methods->[0] !~ /^dsn=/i )
{
die "Invalid combination of recursion methods: "
. join(", ", map { defined($_) ? $_ : 'undef' } @$methods) . ". "
. "Only hosts and processlist may be combined.\n"
}
}
else {
my ($method) = @$methods;
die "Invalid recursion method: " . ( $method || 'undef' )
unless $method && $method =~ m/^(?:processlist$|hosts$|none$|dsn=)/i;
}
}
sub new {
my ( $class, %args ) = @_;
my @required_args = qw(OptionParser DSNParser Quoter);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my $self = {
%args,
replication_thread => {},
};
return bless $self, $class;
}
sub get_slaves {
my ($self, %args) = @_;
my @required_args = qw(make_cxn);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($make_cxn) = @args{@required_args};
my $slaves = [];
my $dp = $self->{DSNParser};
my $methods = $self->_resolve_recursion_methods($args{dsn});
return $slaves unless @$methods;
if ( grep { m/processlist|hosts/i } @$methods ) {
my @required_args = qw(dbh dsn);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($dbh, $dsn) = @args{@required_args};
$self->recurse_to_slaves(
{ dbh => $dbh,
dsn => $dsn,
callback => sub {
my ( $dsn, $dbh, $level, $parent ) = @_;
return unless $level;
PTDEBUG && _d('Found slave:', $dp->as_string($dsn));
push @$slaves, $make_cxn->(dsn => $dsn, dbh => $dbh);
return;
},
}
);
}
elsif ( $methods->[0] =~ m/^dsn=/i ) {
(my $dsn_table_dsn = join ",", @$methods) =~ s/^dsn=//i;
$slaves = $self->get_cxn_from_dsn_table(
%args,
dsn_table_dsn => $dsn_table_dsn,
);
}
elsif ( $methods->[0] =~ m/none/i ) {
PTDEBUG && _d('Not getting to slaves');
}
else {
die "Unexpected recursion methods: @$methods";
}
return $slaves;
}
sub _resolve_recursion_methods {
my ($self, $dsn) = @_;
my $o = $self->{OptionParser};
if ( $o->got('recursion-method') ) {
return $o->get('recursion-method');
}
elsif ( $dsn && ($dsn->{P} || 3306) != 3306 ) {
PTDEBUG && _d('Port number is non-standard; using only hosts method');
return [qw(hosts)];
}
else {
return $o->get('recursion-method');
}
}
sub recurse_to_slaves {
my ( $self, $args, $level ) = @_;
$level ||= 0;
my $dp = $self->{DSNParser};
my $recurse = $args->{recurse} || $self->{OptionParser}->get('recurse');
my $dsn = $args->{dsn};
my $methods = $self->_resolve_recursion_methods($dsn);
PTDEBUG && _d('Recursion methods:', @$methods);
if ( lc($methods->[0]) eq 'none' ) {
PTDEBUG && _d('Not recursing to slaves');
return;
}
my $dbh;
eval {
$dbh = $args->{dbh} || $dp->get_dbh(
$dp->get_cxn_params($dsn), { AutoCommit => 1 });
PTDEBUG && _d('Connected to', $dp->as_string($dsn));
};
if ( $EVAL_ERROR ) {
print STDERR "Cannot connect to ", $dp->as_string($dsn), "\n"
or die "Cannot print: $OS_ERROR";
return;
}
my $sql = 'SELECT @@SERVER_ID';
PTDEBUG && _d($sql);
my ($id) = $dbh->selectrow_array($sql);
PTDEBUG && _d('Working on server ID', $id);
my $master_thinks_i_am = $dsn->{server_id};
if ( !defined $id
|| ( defined $master_thinks_i_am && $master_thinks_i_am != $id )
|| $args->{server_ids_seen}->{$id}++
) {
PTDEBUG && _d('Server ID seen, or not what master said');
if ( $args->{skip_callback} ) {
$args->{skip_callback}->($dsn, $dbh, $level, $args->{parent});
}
return;
}
$args->{callback}->($dsn, $dbh, $level, $args->{parent});
if ( !defined $recurse || $level < $recurse ) {
my @slaves =
grep { !$_->{master_id} || $_->{master_id} == $id } # Only my slaves.
$self->find_slave_hosts($dp, $dbh, $dsn, $methods);
foreach my $slave ( @slaves ) {
PTDEBUG && _d('Recursing from',
$dp->as_string($dsn), 'to', $dp->as_string($slave));
$self->recurse_to_slaves(
{ %$args, dsn => $slave, dbh => undef, parent => $dsn }, $level + 1 );
}
}
}
sub find_slave_hosts {
my ( $self, $dsn_parser, $dbh, $dsn, $methods ) = @_;
PTDEBUG && _d('Looking for slaves on', $dsn_parser->as_string($dsn),
'using methods', @$methods);
my @slaves;
METHOD:
foreach my $method ( @$methods ) {
my $find_slaves = "_find_slaves_by_$method";
PTDEBUG && _d('Finding slaves with', $find_slaves);
@slaves = $self->$find_slaves($dsn_parser, $dbh, $dsn);
last METHOD if @slaves;
}
PTDEBUG && _d('Found', scalar(@slaves), 'slaves');
return @slaves;
}
sub _find_slaves_by_processlist {
my ( $self, $dsn_parser, $dbh, $dsn ) = @_;
my @slaves = map {
my $slave = $dsn_parser->parse("h=$_", $dsn);
$slave->{source} = 'processlist';
$slave;
}
grep { $_ }
map {
my ( $host ) = $_->{host} =~ m/^([^:]+):/;
if ( $host eq 'localhost' ) {
$host = '127.0.0.1'; # Replication never uses sockets.
}
$host;
} $self->get_connected_slaves($dbh);
return @slaves;
}
sub _find_slaves_by_hosts {
my ( $self, $dsn_parser, $dbh, $dsn ) = @_;
my @slaves;
my $sql = 'SHOW SLAVE HOSTS';
PTDEBUG && _d($dbh, $sql);
@slaves = @{$dbh->selectall_arrayref($sql, { Slice => {} })};
if ( @slaves ) {
PTDEBUG && _d('Found some SHOW SLAVE HOSTS info');
@slaves = map {
my %hash;
@hash{ map { lc $_ } keys %$_ } = values %$_;
my $spec = "h=$hash{host},P=$hash{port}"
. ( $hash{user} ? ",u=$hash{user}" : '')
. ( $hash{password} ? ",p=$hash{password}" : '');
my $dsn = $dsn_parser->parse($spec, $dsn);
$dsn->{server_id} = $hash{server_id};
$dsn->{master_id} = $hash{master_id};
$dsn->{source} = 'hosts';
$dsn;
} @slaves;
}
return @slaves;
}
sub get_connected_slaves {
my ( $self, $dbh ) = @_;
my $show = "SHOW GRANTS FOR ";
my $user = 'CURRENT_USER()';
my $sql = $show . $user;
PTDEBUG && _d($dbh, $sql);
my $proc;
eval {
$proc = grep {
m/ALL PRIVILEGES.*?\*\.\*|PROCESS/
} @{$dbh->selectcol_arrayref($sql)};
};
if ( $EVAL_ERROR ) {
if ( $EVAL_ERROR =~ m/no such grant defined for user/ ) {
PTDEBUG && _d('Retrying SHOW GRANTS without host; error:',
$EVAL_ERROR);
($user) = split('@', $user);
$sql = $show . $user;
PTDEBUG && _d($sql);
eval {
$proc = grep {
m/ALL PRIVILEGES.*?\*\.\*|PROCESS/
} @{$dbh->selectcol_arrayref($sql)};
};
}
die "Failed to $sql: $EVAL_ERROR" if $EVAL_ERROR;
}
if ( !$proc ) {
die "You do not have the PROCESS privilege";
}
$sql = 'SHOW PROCESSLIST';
PTDEBUG && _d($dbh, $sql);
grep { $_->{command} =~ m/Binlog Dump/i }
map { # Lowercase the column names
my %hash;
@hash{ map { lc $_ } keys %$_ } = values %$_;
\%hash;
}
@{$dbh->selectall_arrayref($sql, { Slice => {} })};
}
sub is_master_of {
my ( $self, $master, $slave ) = @_;
my $master_status = $self->get_master_status($master)
or die "The server specified as a master is not a master";
my $slave_status = $self->get_slave_status($slave)
or die "The server specified as a slave is not a slave";
my @connected = $self->get_connected_slaves($master)
or die "The server specified as a master has no connected slaves";
my (undef, $port) = $master->selectrow_array("SHOW VARIABLES LIKE 'port'");
if ( $port != $slave_status->{master_port} ) {
die "The slave is connected to $slave_status->{master_port} "
. "but the master's port is $port";
}
if ( !grep { $slave_status->{master_user} eq $_->{user} } @connected ) {
die "I don't see any slave I/O thread connected with user "
. $slave_status->{master_user};
}
if ( ($slave_status->{slave_io_state} || '')
eq 'Waiting for master to send event' )
{
my ( $master_log_name, $master_log_num )
= $master_status->{file} =~ m/^(.*?)\.0*([1-9][0-9]*)$/;
my ( $slave_log_name, $slave_log_num )
= $slave_status->{master_log_file} =~ m/^(.*?)\.0*([1-9][0-9]*)$/;
if ( $master_log_name ne $slave_log_name
|| abs($master_log_num - $slave_log_num) > 1 )
{
die "The slave thinks it is reading from "
. "$slave_status->{master_log_file}, but the "
. "master is writing to $master_status->{file}";
}
}
return 1;
}
sub get_master_dsn {
my ( $self, $dbh, $dsn, $dsn_parser ) = @_;
my $master = $self->get_slave_status($dbh) or return undef;
my $spec = "h=$master->{master_host},P=$master->{master_port}";
return $dsn_parser->parse($spec, $dsn);
}
sub get_slave_status {
my ( $self, $dbh ) = @_;
if ( !$self->{not_a_slave}->{$dbh} ) {
my $sth = $self->{sths}->{$dbh}->{SLAVE_STATUS}
||= $dbh->prepare('SHOW SLAVE STATUS');
PTDEBUG && _d($dbh, 'SHOW SLAVE STATUS');
$sth->execute();
my ($ss) = @{$sth->fetchall_arrayref({})};
if ( $ss && %$ss ) {
$ss = { map { lc($_) => $ss->{$_} } keys %$ss }; # lowercase the keys
return $ss;
}
PTDEBUG && _d('This server returns nothing for SHOW SLAVE STATUS');
$self->{not_a_slave}->{$dbh}++;
}
}
sub get_master_status {
my ( $self, $dbh ) = @_;
if ( $self->{not_a_master}->{$dbh} ) {
PTDEBUG && _d('Server on dbh', $dbh, 'is not a master');
return;
}
my $sth = $self->{sths}->{$dbh}->{MASTER_STATUS}
||= $dbh->prepare('SHOW MASTER STATUS');
PTDEBUG && _d($dbh, 'SHOW MASTER STATUS');
$sth->execute();
my ($ms) = @{$sth->fetchall_arrayref({})};
PTDEBUG && _d(
$ms ? map { "$_=" . (defined $ms->{$_} ? $ms->{$_} : '') } keys %$ms
: '');
if ( !$ms || scalar keys %$ms < 2 ) {
PTDEBUG && _d('Server on dbh', $dbh, 'does not seem to be a master');
$self->{not_a_master}->{$dbh}++;
}
return { map { lc($_) => $ms->{$_} } keys %$ms }; # lowercase the keys
}
sub wait_for_master {
my ( $self, %args ) = @_;
my @required_args = qw(master_status slave_dbh);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($master_status, $slave_dbh) = @args{@required_args};
my $timeout = $args{timeout} || 60;
my $result;
my $waited;
if ( $master_status ) {
my $sql = "SELECT MASTER_POS_WAIT('$master_status->{file}', "
. "$master_status->{position}, $timeout)";
PTDEBUG && _d($slave_dbh, $sql);
my $start = time;
($result) = $slave_dbh->selectrow_array($sql);
$waited = time - $start;
PTDEBUG && _d('Result of waiting:', $result);
PTDEBUG && _d("Waited", $waited, "seconds");
}
else {
PTDEBUG && _d('Not waiting: this server is not a master');
}
return {
result => $result,
waited => $waited,
};
}
sub stop_slave {
my ( $self, $dbh ) = @_;
my $sth = $self->{sths}->{$dbh}->{STOP_SLAVE}
||= $dbh->prepare('STOP SLAVE');
PTDEBUG && _d($dbh, $sth->{Statement});
$sth->execute();
}
sub start_slave {
my ( $self, $dbh, $pos ) = @_;
if ( $pos ) {
my $sql = "START SLAVE UNTIL MASTER_LOG_FILE='$pos->{file}', "
. "MASTER_LOG_POS=$pos->{position}";
PTDEBUG && _d($dbh, $sql);
$dbh->do($sql);
}
else {
my $sth = $self->{sths}->{$dbh}->{START_SLAVE}
||= $dbh->prepare('START SLAVE');
PTDEBUG && _d($dbh, $sth->{Statement});
$sth->execute();
}
}
sub catchup_to_master {
my ( $self, $slave, $master, $timeout ) = @_;
$self->stop_slave($master);
$self->stop_slave($slave);
my $slave_status = $self->get_slave_status($slave);
my $slave_pos = $self->repl_posn($slave_status);
my $master_status = $self->get_master_status($master);
my $master_pos = $self->repl_posn($master_status);
PTDEBUG && _d('Master position:', $self->pos_to_string($master_pos),
'Slave position:', $self->pos_to_string($slave_pos));
my $result;
if ( $self->pos_cmp($slave_pos, $master_pos) < 0 ) {
PTDEBUG && _d('Waiting for slave to catch up to master');
$self->start_slave($slave, $master_pos);
$result = $self->wait_for_master(
master_status => $master_status,
slave_dbh => $slave,
timeout => $timeout,
master_status => $master_status
);
if ( !defined $result->{result} ) {
$slave_status = $self->get_slave_status($slave);
if ( !$self->slave_is_running($slave_status) ) {
PTDEBUG && _d('Master position:',
$self->pos_to_string($master_pos),
'Slave position:', $self->pos_to_string($slave_pos));
$slave_pos = $self->repl_posn($slave_status);
if ( $self->pos_cmp($slave_pos, $master_pos) != 0 ) {
die "MASTER_POS_WAIT() returned NULL but slave has not "
. "caught up to master";
}
PTDEBUG && _d('Slave is caught up to master and stopped');
}
else {
die "Slave has not caught up to master and it is still running";
}
}
}
else {
PTDEBUG && _d("Slave is already caught up to master");
}
return $result;
}
sub catchup_to_same_pos {
my ( $self, $s1_dbh, $s2_dbh ) = @_;
$self->stop_slave($s1_dbh);
$self->stop_slave($s2_dbh);
my $s1_status = $self->get_slave_status($s1_dbh);
my $s2_status = $self->get_slave_status($s2_dbh);
my $s1_pos = $self->repl_posn($s1_status);
my $s2_pos = $self->repl_posn($s2_status);
if ( $self->pos_cmp($s1_pos, $s2_pos) < 0 ) {
$self->start_slave($s1_dbh, $s2_pos);
}
elsif ( $self->pos_cmp($s2_pos, $s1_pos) < 0 ) {
$self->start_slave($s2_dbh, $s1_pos);
}
$s1_status = $self->get_slave_status($s1_dbh);
$s2_status = $self->get_slave_status($s2_dbh);
$s1_pos = $self->repl_posn($s1_status);
$s2_pos = $self->repl_posn($s2_status);
if ( $self->slave_is_running($s1_status)
|| $self->slave_is_running($s2_status)
|| $self->pos_cmp($s1_pos, $s2_pos) != 0)
{
die "The servers aren't both stopped at the same position";
}
}
sub slave_is_running {
my ( $self, $slave_status ) = @_;
return ($slave_status->{slave_sql_running} || 'No') eq 'Yes';
}
sub has_slave_updates {
my ( $self, $dbh ) = @_;
my $sql = q{SHOW VARIABLES LIKE 'log_slave_updates'};
PTDEBUG && _d($dbh, $sql);
my ($name, $value) = $dbh->selectrow_array($sql);
return $value && $value =~ m/^(1|ON)$/;
}
sub repl_posn {
my ( $self, $status ) = @_;
if ( exists $status->{file} && exists $status->{position} ) {
return {
file => $status->{file},
position => $status->{position},
};
}
else {
return {
file => $status->{relay_master_log_file},
position => $status->{exec_master_log_pos},
};
}
}
sub get_slave_lag {
my ( $self, $dbh ) = @_;
my $stat = $self->get_slave_status($dbh);
return unless $stat; # server is not a slave
return $stat->{seconds_behind_master};
}
sub pos_cmp {
my ( $self, $a, $b ) = @_;
return $self->pos_to_string($a) cmp $self->pos_to_string($b);
}
sub short_host {
my ( $self, $dsn ) = @_;
my ($host, $port);
if ( $dsn->{master_host} ) {
$host = $dsn->{master_host};
$port = $dsn->{master_port};
}
else {
$host = $dsn->{h};
$port = $dsn->{P};
}
return ($host || '[default]') . ( ($port || 3306) == 3306 ? '' : ":$port" );
}
sub is_replication_thread {
my ( $self, $query, %args ) = @_;
return unless $query;
my $type = lc($args{type} || 'all');
die "Invalid type: $type"
unless $type =~ m/^binlog_dump|slave_io|slave_sql|all$/i;
my $match = 0;
if ( $type =~ m/binlog_dump|all/i ) {
$match = 1
if ($query->{Command} || $query->{command} || '') eq "Binlog Dump";
}
if ( !$match ) {
if ( ($query->{User} || $query->{user} || '') eq "system user" ) {
PTDEBUG && _d("Slave replication thread");
if ( $type ne 'all' ) {
my $state = $query->{State} || $query->{state} || '';
if ( $state =~ m/^init|end$/ ) {
PTDEBUG && _d("Special state:", $state);
$match = 1;
}
else {
my ($slave_sql) = $state =~ m/
^(Waiting\sfor\sthe\snext\sevent
|Reading\sevent\sfrom\sthe\srelay\slog
|Has\sread\sall\srelay\slog;\swaiting
|Making\stemp\sfile
|Waiting\sfor\sslave\smutex\son\sexit)/xi;
$match = $type eq 'slave_sql' && $slave_sql ? 1
: $type eq 'slave_io' && !$slave_sql ? 1
: 0;
}
}
else {
$match = 1;
}
}
else {
PTDEBUG && _d('Not system user');
}
if ( !defined $args{check_known_ids} || $args{check_known_ids} ) {
my $id = $query->{Id} || $query->{id};
if ( $match ) {
$self->{replication_thread}->{$id} = 1;
}
else {
if ( $self->{replication_thread}->{$id} ) {
PTDEBUG && _d("Thread ID is a known replication thread ID");
$match = 1;
}
}
}
}
PTDEBUG && _d('Matches', $type, 'replication thread:',
($match ? 'yes' : 'no'), '; match:', $match);
return $match;
}
sub get_replication_filters {
my ( $self, %args ) = @_;
my @required_args = qw(dbh);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($dbh) = @args{@required_args};
my %filters = ();
my $status = $self->get_master_status($dbh);
if ( $status ) {
map { $filters{$_} = $status->{$_} }
grep { defined $status->{$_} && $status->{$_} ne '' }
qw(
binlog_do_db
binlog_ignore_db
);
}
$status = $self->get_slave_status($dbh);
if ( $status ) {
map { $filters{$_} = $status->{$_} }
grep { defined $status->{$_} && $status->{$_} ne '' }
qw(
replicate_do_db
replicate_ignore_db
replicate_do_table
replicate_ignore_table
replicate_wild_do_table
replicate_wild_ignore_table
);
my $sql = "SHOW VARIABLES LIKE 'slave_skip_errors'";
PTDEBUG && _d($dbh, $sql);
my $row = $dbh->selectrow_arrayref($sql);
$filters{slave_skip_errors} = $row->[1] if $row->[1] && $row->[1] ne 'OFF';
}
return \%filters;
}
sub pos_to_string {
my ( $self, $pos ) = @_;
my $fmt = '%s/%020d';
return sprintf($fmt, @{$pos}{qw(file position)});
}
sub reset_known_replication_threads {
my ( $self ) = @_;
$self->{replication_thread} = {};
return;
}
sub get_cxn_from_dsn_table {
my ($self, %args) = @_;
my @required_args = qw(dsn_table_dsn make_cxn);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($dsn_table_dsn, $make_cxn) = @args{@required_args};
PTDEBUG && _d('DSN table DSN:', $dsn_table_dsn);
my $dp = $self->{DSNParser};
my $q = $self->{Quoter};
my $dsn = $dp->parse($dsn_table_dsn);
my $dsn_table;
if ( $dsn->{D} && $dsn->{t} ) {
$dsn_table = $q->quote($dsn->{D}, $dsn->{t});
}
elsif ( $dsn->{t} && $dsn->{t} =~ m/\./ ) {
$dsn_table = $q->quote($q->split_unquote($dsn->{t}));
}
else {
die "DSN table DSN does not specify a database (D) "
. "or a database-qualified table (t)";
}
my $dsn_tbl_cxn = $make_cxn->(dsn => $dsn);
my $dbh = $dsn_tbl_cxn->connect();
my $sql = "SELECT dsn FROM $dsn_table ORDER BY id";
PTDEBUG && _d($sql);
my $dsn_strings = $dbh->selectcol_arrayref($sql);
my @cxn;
if ( $dsn_strings ) {
foreach my $dsn_string ( @$dsn_strings ) {
PTDEBUG && _d('DSN from DSN table:', $dsn_string);
push @cxn, $make_cxn->(dsn_string => $dsn_string);
}
}
return \@cxn;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End MasterSlave package
# ###########################################################################
# ###########################################################################
# OptionParser package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/OptionParser.pm
# t/lib/OptionParser.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package OptionParser;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use List::Util qw(max);
use Getopt::Long;
use Data::Dumper;
my $POD_link_re = '[LC]<"?([^">]+)"?>';
sub new {
my ( $class, %args ) = @_;
my @required_args = qw();
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($program_name) = $PROGRAM_NAME =~ m/([.A-Za-z-]+)$/;
$program_name ||= $PROGRAM_NAME;
my $home = $ENV{HOME} || $ENV{HOMEPATH} || $ENV{USERPROFILE} || '.';
my %attributes = (
'type' => 1,
'short form' => 1,
'group' => 1,
'default' => 1,
'cumulative' => 1,
'negatable' => 1,
);
my $self = {
head1 => 'OPTIONS', # These args are used internally
skip_rules => 0, # to instantiate another Option-
item => '--(.*)', # Parser obj that parses the
attributes => \%attributes, # DSN OPTIONS section. Tools
parse_attributes => \&_parse_attribs, # don't tinker with these args.
%args,
strict => 1, # disabled by a special rule
program_name => $program_name,
opts => {},
got_opts => 0,
short_opts => {},
defaults => {},
groups => {},
allowed_groups => {},
errors => [],
rules => [], # desc of rules for --help
mutex => [], # rule: opts are mutually exclusive
atleast1 => [], # rule: at least one opt is required
disables => {}, # rule: opt disables other opts
defaults_to => {}, # rule: opt defaults to value of other opt
DSNParser => undef,
default_files => [
"/etc/percona-toolkit/percona-toolkit.conf",
"/etc/percona-toolkit/$program_name.conf",
"$home/.percona-toolkit.conf",
"$home/.$program_name.conf",
],
types => {
string => 's', # standard Getopt type
int => 'i', # standard Getopt type
float => 'f', # standard Getopt type
Hash => 'H', # hash, formed from a comma-separated list
hash => 'h', # hash as above, but only if a value is given
Array => 'A', # array, similar to Hash
array => 'a', # array, similar to hash
DSN => 'd', # DSN
size => 'z', # size with kMG suffix (powers of 2^10)
time => 'm', # time, with an optional suffix of s/h/m/d
},
};
return bless $self, $class;
}
sub get_specs {
my ( $self, $file ) = @_;
$file ||= $self->{file} || __FILE__;
my @specs = $self->_pod_to_specs($file);
$self->_parse_specs(@specs);
open my $fh, "<", $file or die "Cannot open $file: $OS_ERROR";
my $contents = do { local $/ = undef; <$fh> };
close $fh;
if ( $contents =~ m/^=head1 DSN OPTIONS/m ) {
PTDEBUG && _d('Parsing DSN OPTIONS');
my $dsn_attribs = {
dsn => 1,
copy => 1,
};
my $parse_dsn_attribs = sub {
my ( $self, $option, $attribs ) = @_;
map {
my $val = $attribs->{$_};
if ( $val ) {
$val = $val eq 'yes' ? 1
: $val eq 'no' ? 0
: $val;
$attribs->{$_} = $val;
}
} keys %$attribs;
return {
key => $option,
%$attribs,
};
};
my $dsn_o = new OptionParser(
description => 'DSN OPTIONS',
head1 => 'DSN OPTIONS',
dsn => 0, # XXX don't infinitely recurse!
item => '\* (.)', # key opts are a single character
skip_rules => 1, # no rules before opts
attributes => $dsn_attribs,
parse_attributes => $parse_dsn_attribs,
);
my @dsn_opts = map {
my $opts = {
key => $_->{spec}->{key},
dsn => $_->{spec}->{dsn},
copy => $_->{spec}->{copy},
desc => $_->{desc},
};
$opts;
} $dsn_o->_pod_to_specs($file);
$self->{DSNParser} = DSNParser->new(opts => \@dsn_opts);
}
if ( $contents =~ m/^=head1 VERSION\n\n^(.+)$/m ) {
$self->{version} = $1;
PTDEBUG && _d($self->{version});
}
return;
}
sub DSNParser {
my ( $self ) = @_;
return $self->{DSNParser};
};
sub get_defaults_files {
my ( $self ) = @_;
return @{$self->{default_files}};
}
sub _pod_to_specs {
my ( $self, $file ) = @_;
$file ||= $self->{file} || __FILE__;
open my $fh, '<', $file or die "Cannot open $file: $OS_ERROR";
my @specs = ();
my @rules = ();
my $para;
local $INPUT_RECORD_SEPARATOR = '';
while ( $para = <$fh> ) {
next unless $para =~ m/^=head1 $self->{head1}/;
last;
}
while ( $para = <$fh> ) {
last if $para =~ m/^=over/;
next if $self->{skip_rules};
chomp $para;
$para =~ s/\s+/ /g;
$para =~ s/$POD_link_re/$1/go;
PTDEBUG && _d('Option rule:', $para);
push @rules, $para;
}
die "POD has no $self->{head1} section" unless $para;
do {
if ( my ($option) = $para =~ m/^=item $self->{item}/ ) {
chomp $para;
PTDEBUG && _d($para);
my %attribs;
$para = <$fh>; # read next paragraph, possibly attributes
if ( $para =~ m/: / ) { # attributes
$para =~ s/\s+\Z//g;
%attribs = map {
my ( $attrib, $val) = split(/: /, $_);
die "Unrecognized attribute for --$option: $attrib"
unless $self->{attributes}->{$attrib};
($attrib, $val);
} split(/; /, $para);
if ( $attribs{'short form'} ) {
$attribs{'short form'} =~ s/-//;
}
$para = <$fh>; # read next paragraph, probably short help desc
}
else {
PTDEBUG && _d('Option has no attributes');
}
$para =~ s/\s+\Z//g;
$para =~ s/\s+/ /g;
$para =~ s/$POD_link_re/$1/go;
$para =~ s/\.(?:\n.*| [A-Z].*|\Z)//s;
PTDEBUG && _d('Short help:', $para);
die "No description after option spec $option" if $para =~ m/^=item/;
if ( my ($base_option) = $option =~ m/^\[no\](.*)/ ) {
$option = $base_option;
$attribs{'negatable'} = 1;
}
push @specs, {
spec => $self->{parse_attributes}->($self, $option, \%attribs),
desc => $para
. (defined $attribs{default} ? " (default $attribs{default})" : ''),
group => ($attribs{'group'} ? $attribs{'group'} : 'default'),
};
}
while ( $para = <$fh> ) {
last unless $para;
if ( $para =~ m/^=head1/ ) {
$para = undef; # Can't 'last' out of a do {} block.
last;
}
last if $para =~ m/^=item /;
}
} while ( $para );
die "No valid specs in $self->{head1}" unless @specs;
close $fh;
return @specs, @rules;
}
sub _parse_specs {
my ( $self, @specs ) = @_;
my %disables; # special rule that requires deferred checking
foreach my $opt ( @specs ) {
if ( ref $opt ) { # It's an option spec, not a rule.
PTDEBUG && _d('Parsing opt spec:',
map { ($_, '=>', $opt->{$_}) } keys %$opt);
my ( $long, $short ) = $opt->{spec} =~ m/^([\w-]+)(?:\|([^!+=]*))?/;
if ( !$long ) {
die "Cannot parse long option from spec $opt->{spec}";
}
$opt->{long} = $long;
die "Duplicate long option --$long" if exists $self->{opts}->{$long};
$self->{opts}->{$long} = $opt;
if ( length $long == 1 ) {
PTDEBUG && _d('Long opt', $long, 'looks like short opt');
$self->{short_opts}->{$long} = $long;
}
if ( $short ) {
die "Duplicate short option -$short"
if exists $self->{short_opts}->{$short};
$self->{short_opts}->{$short} = $long;
$opt->{short} = $short;
}
else {
$opt->{short} = undef;
}
$opt->{is_negatable} = $opt->{spec} =~ m/!/ ? 1 : 0;
$opt->{is_cumulative} = $opt->{spec} =~ m/\+/ ? 1 : 0;
$opt->{is_required} = $opt->{desc} =~ m/required/ ? 1 : 0;
$opt->{group} ||= 'default';
$self->{groups}->{ $opt->{group} }->{$long} = 1;
$opt->{value} = undef;
$opt->{got} = 0;
my ( $type ) = $opt->{spec} =~ m/=(.)/;
$opt->{type} = $type;
PTDEBUG && _d($long, 'type:', $type);
$opt->{spec} =~ s/=./=s/ if ( $type && $type =~ m/[HhAadzm]/ );
if ( (my ($def) = $opt->{desc} =~ m/default\b(?: ([^)]+))?/) ) {
$self->{defaults}->{$long} = defined $def ? $def : 1;
PTDEBUG && _d($long, 'default:', $def);
}
if ( $long eq 'config' ) {
$self->{defaults}->{$long} = join(',', $self->get_defaults_files());
}
if ( (my ($dis) = $opt->{desc} =~ m/(disables .*)/) ) {
$disables{$long} = $dis;
PTDEBUG && _d('Deferring check of disables rule for', $opt, $dis);
}
$self->{opts}->{$long} = $opt;
}
else { # It's an option rule, not a spec.
PTDEBUG && _d('Parsing rule:', $opt);
push @{$self->{rules}}, $opt;
my @participants = $self->_get_participants($opt);
my $rule_ok = 0;
if ( $opt =~ m/mutually exclusive|one and only one/ ) {
$rule_ok = 1;
push @{$self->{mutex}}, \@participants;
PTDEBUG && _d(@participants, 'are mutually exclusive');
}
if ( $opt =~ m/at least one|one and only one/ ) {
$rule_ok = 1;
push @{$self->{atleast1}}, \@participants;
PTDEBUG && _d(@participants, 'require at least one');
}
if ( $opt =~ m/default to/ ) {
$rule_ok = 1;
$self->{defaults_to}->{$participants[0]} = $participants[1];
PTDEBUG && _d($participants[0], 'defaults to', $participants[1]);
}
if ( $opt =~ m/restricted to option groups/ ) {
$rule_ok = 1;
my ($groups) = $opt =~ m/groups ([\w\s\,]+)/;
my @groups = split(',', $groups);
%{$self->{allowed_groups}->{$participants[0]}} = map {
s/\s+//;
$_ => 1;
} @groups;
}
if( $opt =~ m/accepts additional command-line arguments/ ) {
$rule_ok = 1;
$self->{strict} = 0;
PTDEBUG && _d("Strict mode disabled by rule");
}
die "Unrecognized option rule: $opt" unless $rule_ok;
}
}
foreach my $long ( keys %disables ) {
my @participants = $self->_get_participants($disables{$long});
$self->{disables}->{$long} = \@participants;
PTDEBUG && _d('Option', $long, 'disables', @participants);
}
return;
}
sub _get_participants {
my ( $self, $str ) = @_;
my @participants;
foreach my $long ( $str =~ m/--(?:\[no\])?([\w-]+)/g ) {
die "Option --$long does not exist while processing rule $str"
unless exists $self->{opts}->{$long};
push @participants, $long;
}
PTDEBUG && _d('Participants for', $str, ':', @participants);
return @participants;
}
sub opts {
my ( $self ) = @_;
my %opts = %{$self->{opts}};
return %opts;
}
sub short_opts {
my ( $self ) = @_;
my %short_opts = %{$self->{short_opts}};
return %short_opts;
}
sub set_defaults {
my ( $self, %defaults ) = @_;
$self->{defaults} = {};
foreach my $long ( keys %defaults ) {
die "Cannot set default for nonexistent option $long"
unless exists $self->{opts}->{$long};
$self->{defaults}->{$long} = $defaults{$long};
PTDEBUG && _d('Default val for', $long, ':', $defaults{$long});
}
return;
}
sub get_defaults {
my ( $self ) = @_;
return $self->{defaults};
}
sub get_groups {
my ( $self ) = @_;
return $self->{groups};
}
sub _set_option {
my ( $self, $opt, $val ) = @_;
my $long = exists $self->{opts}->{$opt} ? $opt
: exists $self->{short_opts}->{$opt} ? $self->{short_opts}->{$opt}
: die "Getopt::Long gave a nonexistent option: $opt";
$opt = $self->{opts}->{$long};
if ( $opt->{is_cumulative} ) {
$opt->{value}++;
}
elsif ( ($opt->{type} || '') eq 's' && $val =~ m/^--?(.+)/ ) {
my $next_opt = $1;
if ( exists $self->{opts}->{$next_opt}
|| exists $self->{short_opts}->{$next_opt} ) {
$self->save_error("--$long requires a string value");
return;
}
else {
$opt->{value} = $val;
}
}
else {
$opt->{value} = $val;
}
$opt->{got} = 1;
PTDEBUG && _d('Got option', $long, '=', $val);
}
sub get_opts {
my ( $self ) = @_;
foreach my $long ( keys %{$self->{opts}} ) {
$self->{opts}->{$long}->{got} = 0;
$self->{opts}->{$long}->{value}
= exists $self->{defaults}->{$long} ? $self->{defaults}->{$long}
: $self->{opts}->{$long}->{is_cumulative} ? 0
: undef;
}
$self->{got_opts} = 0;
$self->{errors} = [];
if ( @ARGV && $ARGV[0] eq "--config" ) {
shift @ARGV;
$self->_set_option('config', shift @ARGV);
}
if ( $self->has('config') ) {
my @extra_args;
foreach my $filename ( split(',', $self->get('config')) ) {
eval {
push @extra_args, $self->_read_config_file($filename);
};
if ( $EVAL_ERROR ) {
if ( $self->got('config') ) {
die $EVAL_ERROR;
}
elsif ( PTDEBUG ) {
_d($EVAL_ERROR);
}
}
}
unshift @ARGV, @extra_args;
}
Getopt::Long::Configure('no_ignore_case', 'bundling');
GetOptions(
map { $_->{spec} => sub { $self->_set_option(@_); } }
grep { $_->{long} ne 'config' } # --config is handled specially above.
values %{$self->{opts}}
) or $self->save_error('Error parsing options');
if ( exists $self->{opts}->{version} && $self->{opts}->{version}->{got} ) {
if ( $self->{version} ) {
print $self->{version}, "\n";
}
else {
print "Error parsing version. See the VERSION section of the tool's documentation.\n";
}
exit 1;
}
if ( @ARGV && $self->{strict} ) {
$self->save_error("Unrecognized command-line options @ARGV");
}
foreach my $mutex ( @{$self->{mutex}} ) {
my @set = grep { $self->{opts}->{$_}->{got} } @$mutex;
if ( @set > 1 ) {
my $err = join(', ', map { "--$self->{opts}->{$_}->{long}" }
@{$mutex}[ 0 .. scalar(@$mutex) - 2] )
. ' and --'.$self->{opts}->{$mutex->[-1]}->{long}
. ' are mutually exclusive.';
$self->save_error($err);
}
}
foreach my $required ( @{$self->{atleast1}} ) {
my @set = grep { $self->{opts}->{$_}->{got} } @$required;
if ( @set == 0 ) {
my $err = join(', ', map { "--$self->{opts}->{$_}->{long}" }
@{$required}[ 0 .. scalar(@$required) - 2] )
.' or --'.$self->{opts}->{$required->[-1]}->{long};
$self->save_error("Specify at least one of $err");
}
}
$self->_check_opts( keys %{$self->{opts}} );
$self->{got_opts} = 1;
return;
}
sub _check_opts {
my ( $self, @long ) = @_;
my $long_last = scalar @long;
while ( @long ) {
foreach my $i ( 0..$#long ) {
my $long = $long[$i];
next unless $long;
my $opt = $self->{opts}->{$long};
if ( $opt->{got} ) {
if ( exists $self->{disables}->{$long} ) {
my @disable_opts = @{$self->{disables}->{$long}};
map { $self->{opts}->{$_}->{value} = undef; } @disable_opts;
PTDEBUG && _d('Unset options', @disable_opts,
'because', $long,'disables them');
}
if ( exists $self->{allowed_groups}->{$long} ) {
my @restricted_groups = grep {
!exists $self->{allowed_groups}->{$long}->{$_}
} keys %{$self->{groups}};
my @restricted_opts;
foreach my $restricted_group ( @restricted_groups ) {
RESTRICTED_OPT:
foreach my $restricted_opt (
keys %{$self->{groups}->{$restricted_group}} )
{
next RESTRICTED_OPT if $restricted_opt eq $long;
push @restricted_opts, $restricted_opt
if $self->{opts}->{$restricted_opt}->{got};
}
}
if ( @restricted_opts ) {
my $err;
if ( @restricted_opts == 1 ) {
$err = "--$restricted_opts[0]";
}
else {
$err = join(', ',
map { "--$self->{opts}->{$_}->{long}" }
grep { $_ }
@restricted_opts[0..scalar(@restricted_opts) - 2]
)
. ' or --'.$self->{opts}->{$restricted_opts[-1]}->{long};
}
$self->save_error("--$long is not allowed with $err");
}
}
}
elsif ( $opt->{is_required} ) {
$self->save_error("Required option --$long must be specified");
}
$self->_validate_type($opt);
if ( $opt->{parsed} ) {
delete $long[$i];
}
else {
PTDEBUG && _d('Temporarily failed to parse', $long);
}
}
die "Failed to parse options, possibly due to circular dependencies"
if @long == $long_last;
$long_last = @long;
}
return;
}
sub _validate_type {
my ( $self, $opt ) = @_;
return unless $opt;
if ( !$opt->{type} ) {
$opt->{parsed} = 1;
return;
}
my $val = $opt->{value};
if ( $val && $opt->{type} eq 'm' ) { # type time
PTDEBUG && _d('Parsing option', $opt->{long}, 'as a time value');
my ( $prefix, $num, $suffix ) = $val =~ m/([+-]?)(\d+)([a-z])?$/;
if ( !$suffix ) {
my ( $s ) = $opt->{desc} =~ m/\(suffix (.)\)/;
$suffix = $s || 's';
PTDEBUG && _d('No suffix given; using', $suffix, 'for',
$opt->{long}, '(value:', $val, ')');
}
if ( $suffix =~ m/[smhd]/ ) {
$val = $suffix eq 's' ? $num # Seconds
: $suffix eq 'm' ? $num * 60 # Minutes
: $suffix eq 'h' ? $num * 3600 # Hours
: $num * 86400; # Days
$opt->{value} = ($prefix || '') . $val;
PTDEBUG && _d('Setting option', $opt->{long}, 'to', $val);
}
else {
$self->save_error("Invalid time suffix for --$opt->{long}");
}
}
elsif ( $val && $opt->{type} eq 'd' ) { # type DSN
PTDEBUG && _d('Parsing option', $opt->{long}, 'as a DSN');
my $prev = {};
my $from_key = $self->{defaults_to}->{ $opt->{long} };
if ( $from_key ) {
PTDEBUG && _d($opt->{long}, 'DSN copies from', $from_key, 'DSN');
if ( $self->{opts}->{$from_key}->{parsed} ) {
$prev = $self->{opts}->{$from_key}->{value};
}
else {
PTDEBUG && _d('Cannot parse', $opt->{long}, 'until',
$from_key, 'parsed');
return;
}
}
my $defaults = $self->{DSNParser}->parse_options($self);
$opt->{value} = $self->{DSNParser}->parse($val, $prev, $defaults);
}
elsif ( $val && $opt->{type} eq 'z' ) { # type size
PTDEBUG && _d('Parsing option', $opt->{long}, 'as a size value');
$self->_parse_size($opt, $val);
}
elsif ( $opt->{type} eq 'H' || (defined $val && $opt->{type} eq 'h') ) {
$opt->{value} = { map { $_ => 1 } split(/(?<!\\),\s*/, ($val || '')) };
}
elsif ( $opt->{type} eq 'A' || (defined $val && $opt->{type} eq 'a') ) {
$opt->{value} = [ split(/(?<!\\),\s*/, ($val || '')) ];
}
else {
PTDEBUG && _d('Nothing to validate for option',
$opt->{long}, 'type', $opt->{type}, 'value', $val);
}
$opt->{parsed} = 1;
return;
}
sub get {
my ( $self, $opt ) = @_;
my $long = (length $opt == 1 ? $self->{short_opts}->{$opt} : $opt);
die "Option $opt does not exist"
unless $long && exists $self->{opts}->{$long};
return $self->{opts}->{$long}->{value};
}
sub got {
my ( $self, $opt ) = @_;
my $long = (length $opt == 1 ? $self->{short_opts}->{$opt} : $opt);
die "Option $opt does not exist"
unless $long && exists $self->{opts}->{$long};
return $self->{opts}->{$long}->{got};
}
sub has {
my ( $self, $opt ) = @_;
my $long = (length $opt == 1 ? $self->{short_opts}->{$opt} : $opt);
return defined $long ? exists $self->{opts}->{$long} : 0;
}
sub set {
my ( $self, $opt, $val ) = @_;
my $long = (length $opt == 1 ? $self->{short_opts}->{$opt} : $opt);
die "Option $opt does not exist"
unless $long && exists $self->{opts}->{$long};
$self->{opts}->{$long}->{value} = $val;
return;
}
sub save_error {
my ( $self, $error ) = @_;
push @{$self->{errors}}, $error;
return;
}
sub errors {
my ( $self ) = @_;
return $self->{errors};
}
sub usage {
my ( $self ) = @_;
warn "No usage string is set" unless $self->{usage}; # XXX
return "Usage: " . ($self->{usage} || '') . "\n";
}
sub descr {
my ( $self ) = @_;
warn "No description string is set" unless $self->{description}; # XXX
my $descr = ($self->{description} || $self->{program_name} || '')
. " For more details, please use the --help option, "
. "or try 'perldoc $PROGRAM_NAME' "
. "for complete documentation.";
$descr = join("\n", $descr =~ m/(.{0,80})(?:\s+|$)/g)
unless $ENV{DONT_BREAK_LINES};
$descr =~ s/ +$//mg;
return $descr;
}
sub usage_or_errors {
my ( $self, $file, $return ) = @_;
$file ||= $self->{file} || __FILE__;
if ( !$self->{description} || !$self->{usage} ) {
PTDEBUG && _d("Getting description and usage from SYNOPSIS in", $file);
my %synop = $self->_parse_synopsis($file);
$self->{description} ||= $synop{description};
$self->{usage} ||= $synop{usage};
PTDEBUG && _d("Description:", $self->{description},
"\nUsage:", $self->{usage});
}
if ( $self->{opts}->{help}->{got} ) {
print $self->print_usage() or die "Cannot print usage: $OS_ERROR";
exit 0 unless $return;
}
elsif ( scalar @{$self->{errors}} ) {
print $self->print_errors() or die "Cannot print errors: $OS_ERROR";
exit 1 unless $return;
}
return;
}
sub print_errors {
my ( $self ) = @_;
my $usage = $self->usage() . "\n";
if ( (my @errors = @{$self->{errors}}) ) {
$usage .= join("\n * ", 'Errors in command-line arguments:', @errors)
. "\n";
}
return $usage . "\n" . $self->descr();
}
sub print_usage {
my ( $self ) = @_;
die "Run get_opts() before print_usage()" unless $self->{got_opts};
my @opts = values %{$self->{opts}};
my $maxl = max(
map {
length($_->{long}) # option long name
+ ($_->{is_negatable} ? 4 : 0) # "[no]" if opt is negatable
+ ($_->{type} ? 2 : 0) # "=x" where x is the opt type
}
@opts);
my $maxs = max(0,
map {
length($_)
+ ($self->{opts}->{$_}->{is_negatable} ? 4 : 0)
+ ($self->{opts}->{$_}->{type} ? 2 : 0)
}
values %{$self->{short_opts}});
my $lcol = max($maxl, ($maxs + 3));
my $rcol = 80 - $lcol - 6;
my $rpad = ' ' x ( 80 - $rcol );
$maxs = max($lcol - 3, $maxs);
my $usage = $self->descr() . "\n" . $self->usage();
my @groups = reverse sort grep { $_ ne 'default'; } keys %{$self->{groups}};
push @groups, 'default';
foreach my $group ( reverse @groups ) {
$usage .= "\n".($group eq 'default' ? 'Options' : $group).":\n\n";
foreach my $opt (
sort { $a->{long} cmp $b->{long} }
grep { $_->{group} eq $group }
@opts )
{
my $long = $opt->{is_negatable} ? "[no]$opt->{long}" : $opt->{long};
my $short = $opt->{short};
my $desc = $opt->{desc};
$long .= $opt->{type} ? "=$opt->{type}" : "";
if ( $opt->{type} && $opt->{type} eq 'm' ) {
my ($s) = $desc =~ m/\(suffix (.)\)/;
$s ||= 's';
$desc =~ s/\s+\(suffix .\)//;
$desc .= ". Optional suffix s=seconds, m=minutes, h=hours, "
. "d=days; if no suffix, $s is used.";
}
$desc = join("\n$rpad", grep { $_ } $desc =~ m/(.{0,$rcol}(?!\W))(?:\s+|(?<=\W)|$)/g);
$desc =~ s/ +$//mg;
if ( $short ) {
$usage .= sprintf(" --%-${maxs}s -%s %s\n", $long, $short, $desc);
}
else {
$usage .= sprintf(" --%-${lcol}s %s\n", $long, $desc);
}
}
}
$usage .= "\nOption types: s=string, i=integer, f=float, h/H/a/A=comma-separated list, d=DSN, z=size, m=time\n";
if ( (my @rules = @{$self->{rules}}) ) {
$usage .= "\nRules:\n\n";
$usage .= join("\n", map { " $_" } @rules) . "\n";
}
if ( $self->{DSNParser} ) {
$usage .= "\n" . $self->{DSNParser}->usage();
}
$usage .= "\nOptions and values after processing arguments:\n\n";
foreach my $opt ( sort { $a->{long} cmp $b->{long} } @opts ) {
my $val = $opt->{value};
my $type = $opt->{type} || '';
my $bool = $opt->{spec} =~ m/^[\w-]+(?:\|[\w-])?!?$/;
$val = $bool ? ( $val ? 'TRUE' : 'FALSE' )
: !defined $val ? '(No value)'
: $type eq 'd' ? $self->{DSNParser}->as_string($val)
: $type =~ m/H|h/ ? join(',', sort keys %$val)
: $type =~ m/A|a/ ? join(',', @$val)
: $val;
$usage .= sprintf(" --%-${lcol}s %s\n", $opt->{long}, $val);
}
return $usage;
}
sub prompt_noecho {
shift @_ if ref $_[0] eq __PACKAGE__;
my ( $prompt ) = @_;
local $OUTPUT_AUTOFLUSH = 1;
print STDERR $prompt
or die "Cannot print: $OS_ERROR";
my $response;
eval {
require Term::ReadKey;
Term::ReadKey::ReadMode('noecho');
chomp($response = <STDIN>);
Term::ReadKey::ReadMode('normal');
print "\n"
or die "Cannot print: $OS_ERROR";
};
if ( $EVAL_ERROR ) {
die "Cannot read response; is Term::ReadKey installed? $EVAL_ERROR";
}
return $response;
}
sub _read_config_file {
my ( $self, $filename ) = @_;
open my $fh, "<", $filename or die "Cannot open $filename: $OS_ERROR\n";
my @args;
my $prefix = '--';
my $parse = 1;
LINE:
while ( my $line = <$fh> ) {
chomp $line;
next LINE if $line =~ m/^\s*(?:\#|\;|$)/;
$line =~ s/\s+#.*$//g;
$line =~ s/^\s+|\s+$//g;
if ( $line eq '--' ) {
$prefix = '';
$parse = 0;
next LINE;
}
if ( $parse
&& (my($opt, $arg) = $line =~ m/^\s*([^=\s]+?)(?:\s*=\s*(.*?)\s*)?$/)
) {
push @args, grep { defined $_ } ("$prefix$opt", $arg);
}
elsif ( $line =~ m/./ ) {
push @args, $line;
}
else {
die "Syntax error in file $filename at line $INPUT_LINE_NUMBER";
}
}
close $fh;
return @args;
}
sub read_para_after {
my ( $self, $file, $regex ) = @_;
open my $fh, "<", $file or die "Can't open $file: $OS_ERROR";
local $INPUT_RECORD_SEPARATOR = '';
my $para;
while ( $para = <$fh> ) {
next unless $para =~ m/^=pod$/m;
last;
}
while ( $para = <$fh> ) {
next unless $para =~ m/$regex/;
last;
}
$para = <$fh>;
chomp($para);
close $fh or die "Can't close $file: $OS_ERROR";
return $para;
}
sub clone {
my ( $self ) = @_;
my %clone = map {
my $hashref = $self->{$_};
my $val_copy = {};
foreach my $key ( keys %$hashref ) {
my $ref = ref $hashref->{$key};
$val_copy->{$key} = !$ref ? $hashref->{$key}
: $ref eq 'HASH' ? { %{$hashref->{$key}} }
: $ref eq 'ARRAY' ? [ @{$hashref->{$key}} ]
: $hashref->{$key};
}
$_ => $val_copy;
} qw(opts short_opts defaults);
foreach my $scalar ( qw(got_opts) ) {
$clone{$scalar} = $self->{$scalar};
}
return bless \%clone;
}
sub _parse_size {
my ( $self, $opt, $val ) = @_;
if ( lc($val || '') eq 'null' ) {
PTDEBUG && _d('NULL size for', $opt->{long});
$opt->{value} = 'null';
return;
}
my %factor_for = (k => 1_024, M => 1_048_576, G => 1_073_741_824);
my ($pre, $num, $factor) = $val =~ m/^([+-])?(\d+)([kMG])?$/;
if ( defined $num ) {
if ( $factor ) {
$num *= $factor_for{$factor};
PTDEBUG && _d('Setting option', $opt->{y},
'to num', $num, '* factor', $factor);
}
$opt->{value} = ($pre || '') . $num;
}
else {
$self->save_error("Invalid size for --$opt->{long}: $val");
}
return;
}
sub _parse_attribs {
my ( $self, $option, $attribs ) = @_;
my $types = $self->{types};
return $option
. ($attribs->{'short form'} ? '|' . $attribs->{'short form'} : '' )
. ($attribs->{'negatable'} ? '!' : '' )
. ($attribs->{'cumulative'} ? '+' : '' )
. ($attribs->{'type'} ? '=' . $types->{$attribs->{type}} : '' );
}
sub _parse_synopsis {
my ( $self, $file ) = @_;
$file ||= $self->{file} || __FILE__;
PTDEBUG && _d("Parsing SYNOPSIS in", $file);
local $INPUT_RECORD_SEPARATOR = ''; # read paragraphs
open my $fh, "<", $file or die "Cannot open $file: $OS_ERROR";
my $para;
1 while defined($para = <$fh>) && $para !~ m/^=head1 SYNOPSIS/;
die "$file does not contain a SYNOPSIS section" unless $para;
my @synop;
for ( 1..2 ) { # 1 for the usage, 2 for the description
my $para = <$fh>;
push @synop, $para;
}
close $fh;
PTDEBUG && _d("Raw SYNOPSIS text:", @synop);
my ($usage, $desc) = @synop;
die "The SYNOPSIS section in $file is not formatted properly"
unless $usage && $desc;
$usage =~ s/^\s*Usage:\s+(.+)/$1/;
chomp $usage;
$desc =~ s/\n/ /g;
$desc =~ s/\s{2,}/ /g;
$desc =~ s/\. ([A-Z][a-z])/. $1/g;
$desc =~ s/\s+$//;
return (
description => $desc,
usage => $usage,
);
};
sub set_vars {
my ($self, $file) = @_;
$file ||= $self->{file} || __FILE__;
my %user_vars;
my $user_vars = $self->has('set-vars') ? $self->get('set-vars') : undef;
if ( $user_vars ) {
foreach my $var_val ( @$user_vars ) {
my ($var, $val) = $var_val =~ m/([^\s=]+)=(\S+)/;
die "Invalid --set-vars value: $var_val\n" unless $var && defined $val;
$user_vars{$var} = {
val => $val,
default => 0,
};
}
}
my %default_vars;
my $default_vars = $self->read_para_after($file, qr/MAGIC_set_vars/);
if ( $default_vars ) {
%default_vars = map {
my $var_val = $_;
my ($var, $val) = $var_val =~ m/([^\s=]+)=(\S+)/;
die "Invalid --set-vars value: $var_val\n" unless $var && defined $val;
$var => {
val => $val,
default => 1,
};
} split("\n", $default_vars);
}
my %vars = (
%default_vars, # first the tool's defaults
%user_vars, # then the user's which overwrite the defaults
);
PTDEBUG && _d('--set-vars:', Dumper(\%vars));
return \%vars;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
if ( PTDEBUG ) {
print STDERR '# ', $^X, ' ', $], "\n";
if ( my $uname = `uname -a` ) {
$uname =~ s/\s+/ /g;
print STDERR "# $uname\n";
}
print STDERR '# Arguments: ',
join(' ', map { my $a = "_[$_]_"; $a =~ s/\n/\n# /g; $a; } @ARGV), "\n";
}
1;
}
# ###########################################################################
# End OptionParser package
# ###########################################################################
# ###########################################################################
# DSNParser package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/DSNParser.pm
# t/lib/DSNParser.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package DSNParser;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Data::Dumper;
$Data::Dumper::Indent = 0;
$Data::Dumper::Quotekeys = 0;
my $dsn_sep = qr/(?<!\\),/;
eval {
require DBI;
};
my $have_dbi = $EVAL_ERROR ? 0 : 1;
sub new {
my ( $class, %args ) = @_;
foreach my $arg ( qw(opts) ) {
die "I need a $arg argument" unless $args{$arg};
}
my $self = {
opts => {} # h, P, u, etc. Should come from DSN OPTIONS section in POD.
};
foreach my $opt ( @{$args{opts}} ) {
if ( !$opt->{key} || !$opt->{desc} ) {
die "Invalid DSN option: ", Dumper($opt);
}
PTDEBUG && _d('DSN option:',
join(', ',
map { "$_=" . (defined $opt->{$_} ? ($opt->{$_} || '') : 'undef') }
keys %$opt
)
);
$self->{opts}->{$opt->{key}} = {
dsn => $opt->{dsn},
desc => $opt->{desc},
copy => $opt->{copy} || 0,
};
}
return bless $self, $class;
}
sub prop {
my ( $self, $prop, $value ) = @_;
if ( @_ > 2 ) {
PTDEBUG && _d('Setting', $prop, 'property');
$self->{$prop} = $value;
}
return $self->{$prop};
}
sub parse {
my ( $self, $dsn, $prev, $defaults ) = @_;
if ( !$dsn ) {
PTDEBUG && _d('No DSN to parse');
return;
}
PTDEBUG && _d('Parsing', $dsn);
$prev ||= {};
$defaults ||= {};
my %given_props;
my %final_props;
my $opts = $self->{opts};
foreach my $dsn_part ( split($dsn_sep, $dsn) ) {
$dsn_part =~ s/\\,/,/g;
if ( my ($prop_key, $prop_val) = $dsn_part =~ m/^(.)=(.*)$/ ) {
$given_props{$prop_key} = $prop_val;
}
else {
PTDEBUG && _d('Interpreting', $dsn_part, 'as h=', $dsn_part);
$given_props{h} = $dsn_part;
}
}
foreach my $key ( keys %$opts ) {
PTDEBUG && _d('Finding value for', $key);
$final_props{$key} = $given_props{$key};
if ( !defined $final_props{$key}
&& defined $prev->{$key} && $opts->{$key}->{copy} )
{
$final_props{$key} = $prev->{$key};
PTDEBUG && _d('Copying value for', $key, 'from previous DSN');
}
if ( !defined $final_props{$key} ) {
$final_props{$key} = $defaults->{$key};
PTDEBUG && _d('Copying value for', $key, 'from defaults');
}
}
foreach my $key ( keys %given_props ) {
die "Unknown DSN option '$key' in '$dsn'. For more details, "
. "please use the --help option, or try 'perldoc $PROGRAM_NAME' "
. "for complete documentation."
unless exists $opts->{$key};
}
if ( (my $required = $self->prop('required')) ) {
foreach my $key ( keys %$required ) {
die "Missing required DSN option '$key' in '$dsn'. For more details, "
. "please use the --help option, or try 'perldoc $PROGRAM_NAME' "
. "for complete documentation."
unless $final_props{$key};
}
}
return \%final_props;
}
sub parse_options {
my ( $self, $o ) = @_;
die 'I need an OptionParser object' unless ref $o eq 'OptionParser';
my $dsn_string
= join(',',
map { "$_=".$o->get($_); }
grep { $o->has($_) && $o->get($_) }
keys %{$self->{opts}}
);
PTDEBUG && _d('DSN string made from options:', $dsn_string);
return $self->parse($dsn_string);
}
sub as_string {
my ( $self, $dsn, $props ) = @_;
return $dsn unless ref $dsn;
my @keys = $props ? @$props : sort keys %$dsn;
return join(',',
map { "$_=" . ($_ eq 'p' ? '...' : $dsn->{$_}) }
grep {
exists $self->{opts}->{$_}
&& exists $dsn->{$_}
&& defined $dsn->{$_}
} @keys);
}
sub usage {
my ( $self ) = @_;
my $usage
= "DSN syntax is key=value[,key=value...] Allowable DSN keys:\n\n"
. " KEY COPY MEANING\n"
. " === ==== =============================================\n";
my %opts = %{$self->{opts}};
foreach my $key ( sort keys %opts ) {
$usage .= " $key "
. ($opts{$key}->{copy} ? 'yes ' : 'no ')
. ($opts{$key}->{desc} || '[No description]')
. "\n";
}
$usage .= "\n If the DSN is a bareword, the word is treated as the 'h' key.\n";
return $usage;
}
sub get_cxn_params {
my ( $self, $info ) = @_;
my $dsn;
my %opts = %{$self->{opts}};
my $driver = $self->prop('dbidriver') || '';
if ( $driver eq 'Pg' ) {
$dsn = 'DBI:Pg:dbname=' . ( $info->{D} || '' ) . ';'
. join(';', map { "$opts{$_}->{dsn}=$info->{$_}" }
grep { defined $info->{$_} }
qw(h P));
}
else {
$dsn = 'DBI:mysql:' . ( $info->{D} || '' ) . ';'
. join(';', map { "$opts{$_}->{dsn}=$info->{$_}" }
grep { defined $info->{$_} }
qw(F h P S A))
. ';mysql_read_default_group=client'
. ($info->{L} ? ';mysql_local_infile=1' : '');
}
PTDEBUG && _d($dsn);
return ($dsn, $info->{u}, $info->{p});
}
sub fill_in_dsn {
my ( $self, $dbh, $dsn ) = @_;
my $vars = $dbh->selectall_hashref('SHOW VARIABLES', 'Variable_name');
my ($user, $db) = $dbh->selectrow_array('SELECT USER(), DATABASE()');
$user =~ s/@.*//;
$dsn->{h} ||= $vars->{hostname}->{Value};
$dsn->{S} ||= $vars->{'socket'}->{Value};
$dsn->{P} ||= $vars->{port}->{Value};
$dsn->{u} ||= $user;
$dsn->{D} ||= $db;
}
sub get_dbh {
my ( $self, $cxn_string, $user, $pass, $opts ) = @_;
$opts ||= {};
my $defaults = {
AutoCommit => 0,
RaiseError => 1,
PrintError => 0,
ShowErrorStatement => 1,
mysql_enable_utf8 => ($cxn_string =~ m/charset=utf8/i ? 1 : 0),
};
@{$defaults}{ keys %$opts } = values %$opts;
if (delete $defaults->{L}) { # L for LOAD DATA LOCAL INFILE, our own extension
$defaults->{mysql_local_infile} = 1;
}
if ( $opts->{mysql_use_result} ) {
$defaults->{mysql_use_result} = 1;
}
if ( !$have_dbi ) {
die "Cannot connect to MySQL because the Perl DBI module is not "
. "installed or not found. Run 'perl -MDBI' to see the directories "
. "that Perl searches for DBI. If DBI is not installed, try:\n"
. " Debian/Ubuntu apt-get install libdbi-perl\n"
. " RHEL/CentOS yum install perl-DBI\n"
. " OpenSolaris pkg install pkg:/SUNWpmdbi\n";
}
my $dbh;
my $tries = 2;
while ( !$dbh && $tries-- ) {
PTDEBUG && _d($cxn_string, ' ', $user, ' ', $pass,
join(', ', map { "$_=>$defaults->{$_}" } keys %$defaults ));
$dbh = eval { DBI->connect($cxn_string, $user, $pass, $defaults) };
if ( !$dbh && $EVAL_ERROR ) {
if ( $EVAL_ERROR =~ m/locate DBD\/mysql/i ) {
die "Cannot connect to MySQL because the Perl DBD::mysql module is "
. "not installed or not found. Run 'perl -MDBD::mysql' to see "
. "the directories that Perl searches for DBD::mysql. If "
. "DBD::mysql is not installed, try:\n"
. " Debian/Ubuntu apt-get install libdbd-mysql-perl\n"
. " RHEL/CentOS yum install perl-DBD-MySQL\n"
. " OpenSolaris pgk install pkg:/SUNWapu13dbd-mysql\n";
}
elsif ( $EVAL_ERROR =~ m/not a compiled character set|character set utf8/ ) {
PTDEBUG && _d('Going to try again without utf8 support');
delete $defaults->{mysql_enable_utf8};
}
if ( !$tries ) {
die $EVAL_ERROR;
}
}
}
if ( $cxn_string =~ m/mysql/i ) {
my $sql;
$sql = 'SELECT @@SQL_MODE';
PTDEBUG && _d($dbh, $sql);
my ($sql_mode) = eval { $dbh->selectrow_array($sql) };
if ( $EVAL_ERROR ) {
die "Error getting the current SQL_MODE: $EVAL_ERROR";
}
if ( my ($charset) = $cxn_string =~ m/charset=([\w]+)/ ) {
$sql = qq{/*!40101 SET NAMES "$charset"*/};
PTDEBUG && _d($dbh, $sql);
eval { $dbh->do($sql) };
if ( $EVAL_ERROR ) {
die "Error setting NAMES to $charset: $EVAL_ERROR";
}
PTDEBUG && _d('Enabling charset for STDOUT');
if ( $charset eq 'utf8' ) {
binmode(STDOUT, ':utf8')
or die "Can't binmode(STDOUT, ':utf8'): $OS_ERROR";
}
else {
binmode(STDOUT) or die "Can't binmode(STDOUT): $OS_ERROR";
}
}
if ( my $vars = $self->prop('set-vars') ) {
$self->set_vars($dbh, $vars);
}
$sql = 'SET @@SQL_QUOTE_SHOW_CREATE = 1'
. '/*!40101, @@SQL_MODE=\'NO_AUTO_VALUE_ON_ZERO'
. ($sql_mode ? ",$sql_mode" : '')
. '\'*/';
PTDEBUG && _d($dbh, $sql);
eval { $dbh->do($sql) };
if ( $EVAL_ERROR ) {
die "Error setting SQL_QUOTE_SHOW_CREATE, SQL_MODE"
. ($sql_mode ? " and $sql_mode" : '')
. ": $EVAL_ERROR";
}
}
PTDEBUG && _d('DBH info: ',
$dbh,
Dumper($dbh->selectrow_hashref(
'SELECT DATABASE(), CONNECTION_ID(), VERSION()/*!50038 , @@hostname*/')),
'Connection info:', $dbh->{mysql_hostinfo},
'Character set info:', Dumper($dbh->selectall_arrayref(
"SHOW VARIABLES LIKE 'character_set%'", { Slice => {}})),
'$DBD::mysql::VERSION:', $DBD::mysql::VERSION,
'$DBI::VERSION:', $DBI::VERSION,
);
return $dbh;
}
sub get_hostname {
my ( $self, $dbh ) = @_;
if ( my ($host) = ($dbh->{mysql_hostinfo} || '') =~ m/^(\w+) via/ ) {
return $host;
}
my ( $hostname, $one ) = $dbh->selectrow_array(
'SELECT /*!50038 @@hostname, */ 1');
return $hostname;
}
sub disconnect {
my ( $self, $dbh ) = @_;
PTDEBUG && $self->print_active_handles($dbh);
$dbh->disconnect;
}
sub print_active_handles {
my ( $self, $thing, $level ) = @_;
$level ||= 0;
printf("# Active %sh: %s %s %s\n", ($thing->{Type} || 'undef'), "\t" x $level,
$thing, (($thing->{Type} || '') eq 'st' ? $thing->{Statement} || '' : ''))
or die "Cannot print: $OS_ERROR";
foreach my $handle ( grep {defined} @{ $thing->{ChildHandles} } ) {
$self->print_active_handles( $handle, $level + 1 );
}
}
sub copy {
my ( $self, $dsn_1, $dsn_2, %args ) = @_;
die 'I need a dsn_1 argument' unless $dsn_1;
die 'I need a dsn_2 argument' unless $dsn_2;
my %new_dsn = map {
my $key = $_;
my $val;
if ( $args{overwrite} ) {
$val = defined $dsn_1->{$key} ? $dsn_1->{$key} : $dsn_2->{$key};
}
else {
$val = defined $dsn_2->{$key} ? $dsn_2->{$key} : $dsn_1->{$key};
}
$key => $val;
} keys %{$self->{opts}};
return \%new_dsn;
}
sub set_vars {
my ($self, $dbh, $vars) = @_;
return unless $vars;
foreach my $var ( sort keys %$vars ) {
my $val = $vars->{$var}->{val};
(my $quoted_var = $var) =~ s/_/\\_/;
my ($var_exists, $current_val);
eval {
($var_exists, $current_val) = $dbh->selectrow_array(
"SHOW VARIABLES LIKE '$quoted_var'");
};
my $e = $EVAL_ERROR;
if ( $e ) {
PTDEBUG && _d($e);
}
if ( $vars->{$var}->{default} && !$var_exists ) {
PTDEBUG && _d('Not setting default var', $var,
'because it does not exist');
next;
}
if ( $current_val && $current_val eq $val ) {
PTDEBUG && _d('Not setting var', $var, 'because its value',
'is already', $val);
next;
}
my $sql = "SET SESSION $var=$val";
PTDEBUG && _d($dbh, $sql);
eval { $dbh->do($sql) };
if ( my $set_error = $EVAL_ERROR ) {
chomp($set_error);
$set_error =~ s/ at \S+ line \d+//;
my $msg = "Error setting $var: $set_error";
if ( $current_val ) {
$msg .= " The current value for $var is $current_val. "
. "If the variable is read only (not dynamic), specify "
. "--set-vars $var=$current_val to avoid this warning, "
. "else manually set the variable and restart MySQL.";
}
warn $msg . "\n\n";
}
}
return;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End DSNParser package
# ###########################################################################
# ###########################################################################
# Daemon package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/Daemon.pm
# t/lib/Daemon.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package Daemon;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use POSIX qw(setsid);
sub new {
my ( $class, %args ) = @_;
foreach my $arg ( qw(o) ) {
die "I need a $arg argument" unless $args{$arg};
}
my $o = $args{o};
my $self = {
o => $o,
log_file => $o->has('log') ? $o->get('log') : undef,
PID_file => $o->has('pid') ? $o->get('pid') : undef,
};
check_PID_file(undef, $self->{PID_file});
PTDEBUG && _d('Daemonized child will log to', $self->{log_file});
return bless $self, $class;
}
sub daemonize {
my ( $self ) = @_;
PTDEBUG && _d('About to fork and daemonize');
defined (my $pid = fork()) or die "Cannot fork: $OS_ERROR";
if ( $pid ) {
PTDEBUG && _d('Parent PID', $PID, 'exiting after forking child PID',$pid);
exit;
}
PTDEBUG && _d('Daemonizing child PID', $PID);
$self->{PID_owner} = $PID;
$self->{child} = 1;
POSIX::setsid() or die "Cannot start a new session: $OS_ERROR";
chdir '/' or die "Cannot chdir to /: $OS_ERROR";
$self->_make_PID_file();
$OUTPUT_AUTOFLUSH = 1;
PTDEBUG && _d('Redirecting STDIN to /dev/null');
close STDIN;
open STDIN, '/dev/null'
or die "Cannot reopen STDIN to /dev/null: $OS_ERROR";
if ( $self->{log_file} ) {
PTDEBUG && _d('Redirecting STDOUT and STDERR to', $self->{log_file});
close STDOUT;
open STDOUT, '>>', $self->{log_file}
or die "Cannot open log file $self->{log_file}: $OS_ERROR";
close STDERR;
open STDERR, ">&STDOUT"
or die "Cannot dupe STDERR to STDOUT: $OS_ERROR";
}
else {
if ( -t STDOUT ) {
PTDEBUG && _d('No log file and STDOUT is a terminal;',
'redirecting to /dev/null');
close STDOUT;
open STDOUT, '>', '/dev/null'
or die "Cannot reopen STDOUT to /dev/null: $OS_ERROR";
}
if ( -t STDERR ) {
PTDEBUG && _d('No log file and STDERR is a terminal;',
'redirecting to /dev/null');
close STDERR;
open STDERR, '>', '/dev/null'
or die "Cannot reopen STDERR to /dev/null: $OS_ERROR";
}
}
return;
}
sub check_PID_file {
my ( $self, $file ) = @_;
my $PID_file = $self ? $self->{PID_file} : $file;
PTDEBUG && _d('Checking PID file', $PID_file);
if ( $PID_file && -f $PID_file ) {
my $pid;
eval {
chomp($pid = (slurp_file($PID_file) || ''));
};
if ( $EVAL_ERROR ) {
die "The PID file $PID_file already exists but it cannot be read: "
. $EVAL_ERROR;
}
PTDEBUG && _d('PID file exists; it contains PID', $pid);
if ( $pid ) {
my $pid_is_alive = kill 0, $pid;
if ( $pid_is_alive ) {
die "The PID file $PID_file already exists "
. " and the PID that it contains, $pid, is running";
}
else {
warn "Overwriting PID file $PID_file because the PID that it "
. "contains, $pid, is not running";
}
}
else {
die "The PID file $PID_file already exists but it does not "
. "contain a PID";
}
}
else {
PTDEBUG && _d('No PID file');
}
return;
}
sub make_PID_file {
my ( $self ) = @_;
if ( exists $self->{child} ) {
die "Do not call Daemon::make_PID_file() for daemonized scripts";
}
$self->_make_PID_file();
$self->{PID_owner} = $PID;
return;
}
sub _make_PID_file {
my ( $self ) = @_;
my $PID_file = $self->{PID_file};
if ( !$PID_file ) {
PTDEBUG && _d('No PID file to create');
return;
}
$self->check_PID_file();
open my $PID_FH, '>', $PID_file
or die "Cannot open PID file $PID_file: $OS_ERROR";
print $PID_FH $PID
or die "Cannot print to PID file $PID_file: $OS_ERROR";
close $PID_FH
or die "Cannot close PID file $PID_file: $OS_ERROR";
PTDEBUG && _d('Created PID file:', $self->{PID_file});
return;
}
sub _remove_PID_file {
my ( $self ) = @_;
if ( $self->{PID_file} && -f $self->{PID_file} ) {
unlink $self->{PID_file}
or warn "Cannot remove PID file $self->{PID_file}: $OS_ERROR";
PTDEBUG && _d('Removed PID file');
}
else {
PTDEBUG && _d('No PID to remove');
}
return;
}
sub DESTROY {
my ( $self ) = @_;
$self->_remove_PID_file() if ($self->{PID_owner} || 0) == $PID;
return;
}
sub slurp_file {
my ($file) = @_;
return unless $file;
open my $fh, "<", $file or die "Cannot open $file: $OS_ERROR";
return do { local $/; <$fh> };
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End Daemon package
# ###########################################################################
# ###########################################################################
# Quoter package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/Quoter.pm
# t/lib/Quoter.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package Quoter;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Data::Dumper;
$Data::Dumper::Indent = 1;
$Data::Dumper::Sortkeys = 1;
$Data::Dumper::Quotekeys = 0;
sub new {
my ( $class, %args ) = @_;
return bless {}, $class;
}
sub quote {
my ( $self, @vals ) = @_;
foreach my $val ( @vals ) {
$val =~ s/`/``/g;
}
return join('.', map { '`' . $_ . '`' } @vals);
}
sub quote_val {
my ( $self, $val, %args ) = @_;
return 'NULL' unless defined $val; # undef = NULL
return "''" if $val eq ''; # blank string = ''
return $val if $val =~ m/^0x[0-9a-fA-F]+$/ # quote hex data
&& !$args{is_char}; # unless is_char is true
$val =~ s/(['\\])/\\$1/g;
return "'$val'";
}
sub split_unquote {
my ( $self, $db_tbl, $default_db ) = @_;
my ( $db, $tbl ) = split(/[.]/, $db_tbl);
if ( !$tbl ) {
$tbl = $db;
$db = $default_db;
}
for ($db, $tbl) {
next unless $_;
s/\A`//;
s/`\z//;
s/``/`/g;
}
return ($db, $tbl);
}
sub literal_like {
my ( $self, $like ) = @_;
return unless $like;
$like =~ s/([%_])/\\$1/g;
return "'$like'";
}
sub join_quote {
my ( $self, $default_db, $db_tbl ) = @_;
return unless $db_tbl;
my ($db, $tbl) = split(/[.]/, $db_tbl);
if ( !$tbl ) {
$tbl = $db;
$db = $default_db;
}
$db = "`$db`" if $db && $db !~ m/^`/;
$tbl = "`$tbl`" if $tbl && $tbl !~ m/^`/;
return $db ? "$db.$tbl" : $tbl;
}
sub serialize_list {
my ( $self, @args ) = @_;
PTDEBUG && _d('Serializing', Dumper(\@args));
return unless @args;
my @parts;
foreach my $arg ( @args ) {
if ( defined $arg ) {
$arg =~ s/,/\\,/g; # escape commas
$arg =~ s/\\N/\\\\N/g; # escape literal \N
push @parts, $arg;
}
else {
push @parts, '\N';
}
}
my $string = join(',', @parts);
PTDEBUG && _d('Serialized: <', $string, '>');
return $string;
}
sub deserialize_list {
my ( $self, $string ) = @_;
PTDEBUG && _d('Deserializing <', $string, '>');
die "Cannot deserialize an undefined string" unless defined $string;
my @parts;
foreach my $arg ( split(/(?<!\\),/, $string) ) {
if ( $arg eq '\N' ) {
$arg = undef;
}
else {
$arg =~ s/\\,/,/g;
$arg =~ s/\\\\N/\\N/g;
}
push @parts, $arg;
}
if ( !@parts ) {
my $n_empty_strings = $string =~ tr/,//;
$n_empty_strings++;
PTDEBUG && _d($n_empty_strings, 'empty strings');
map { push @parts, '' } 1..$n_empty_strings;
}
elsif ( $string =~ m/(?<!\\),$/ ) {
PTDEBUG && _d('Last value is an empty string');
push @parts, '';
}
PTDEBUG && _d('Deserialized', Dumper(\@parts));
return @parts;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End Quoter package
# ###########################################################################
# ###########################################################################
# TableParser package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/TableParser.pm
# t/lib/TableParser.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package TableParser;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Data::Dumper;
$Data::Dumper::Indent = 1;
$Data::Dumper::Sortkeys = 1;
$Data::Dumper::Quotekeys = 0;
local $EVAL_ERROR;
eval {
require Quoter;
};
sub new {
my ( $class, %args ) = @_;
my $self = { %args };
$self->{Quoter} ||= Quoter->new();
return bless $self, $class;
}
sub Quoter { shift->{Quoter} }
sub get_create_table {
my ( $self, $dbh, $db, $tbl ) = @_;
die "I need a dbh parameter" unless $dbh;
die "I need a db parameter" unless $db;
die "I need a tbl parameter" unless $tbl;
my $q = $self->{Quoter};
my $new_sql_mode
= q{/*!40101 SET @OLD_SQL_MODE := @@SQL_MODE, }
. q{@@SQL_MODE := '', }
. q{@OLD_QUOTE := @@SQL_QUOTE_SHOW_CREATE, }
. q{@@SQL_QUOTE_SHOW_CREATE := 1 */};
my $old_sql_mode
= q{/*!40101 SET @@SQL_MODE := @OLD_SQL_MODE, }
. q{@@SQL_QUOTE_SHOW_CREATE := @OLD_QUOTE */};
PTDEBUG && _d($new_sql_mode);
eval { $dbh->do($new_sql_mode); };
PTDEBUG && $EVAL_ERROR && _d($EVAL_ERROR);
my $use_sql = 'USE ' . $q->quote($db);
PTDEBUG && _d($dbh, $use_sql);
$dbh->do($use_sql);
my $show_sql = "SHOW CREATE TABLE " . $q->quote($db, $tbl);
PTDEBUG && _d($show_sql);
my $href;
eval { $href = $dbh->selectrow_hashref($show_sql); };
if ( my $e = $EVAL_ERROR ) {
PTDEBUG && _d($old_sql_mode);
$dbh->do($old_sql_mode);
die $e;
}
PTDEBUG && _d($old_sql_mode);
$dbh->do($old_sql_mode);
my ($key) = grep { m/create (?:table|view)/i } keys %$href;
if ( !$key ) {
die "Error: no 'Create Table' or 'Create View' in result set from "
. "$show_sql: " . Dumper($href);
}
return $href->{$key};
}
sub parse {
my ( $self, $ddl, $opts ) = @_;
return unless $ddl;
if ( $ddl =~ m/CREATE (?:TEMPORARY )?TABLE "/ ) {
$ddl = $self->ansi_to_legacy($ddl);
}
elsif ( $ddl !~ m/CREATE (?:TEMPORARY )?TABLE `/ ) {
die "TableParser doesn't handle CREATE TABLE without quoting.";
}
my ($name) = $ddl =~ m/CREATE (?:TEMPORARY )?TABLE\s+(`.+?`)/;
(undef, $name) = $self->{Quoter}->split_unquote($name) if $name;
$ddl =~ s/(`[^`]+`)/\L$1/g;
my $engine = $self->get_engine($ddl);
my @defs = $ddl =~ m/^(\s+`.*?),?$/gm;
my @cols = map { $_ =~ m/`([^`]+)`/ } @defs;
PTDEBUG && _d('Table cols:', join(', ', map { "`$_`" } @cols));
my %def_for;
@def_for{@cols} = @defs;
my (@nums, @null);
my (%type_for, %is_nullable, %is_numeric, %is_autoinc);
foreach my $col ( @cols ) {
my $def = $def_for{$col};
$def =~ s/``//g;
my ( $type ) = $def =~ m/`[^`]+`\s([a-z]+)/;
die "Can't determine column type for $def" unless $type;
$type_for{$col} = $type;
if ( $type =~ m/(?:(?:tiny|big|medium|small)?int|float|double|decimal|year)/ ) {
push @nums, $col;
$is_numeric{$col} = 1;
}
if ( $def !~ m/NOT NULL/ ) {
push @null, $col;
$is_nullable{$col} = 1;
}
$is_autoinc{$col} = $def =~ m/AUTO_INCREMENT/i ? 1 : 0;
}
my ($keys, $clustered_key) = $self->get_keys($ddl, $opts, \%is_nullable);
my ($charset) = $ddl =~ m/DEFAULT CHARSET=(\w+)/;
return {
name => $name,
cols => \@cols,
col_posn => { map { $cols[$_] => $_ } 0..$#cols },
is_col => { map { $_ => 1 } @cols },
null_cols => \@null,
is_nullable => \%is_nullable,
is_autoinc => \%is_autoinc,
clustered_key => $clustered_key,
keys => $keys,
defs => \%def_for,
numeric_cols => \@nums,
is_numeric => \%is_numeric,
engine => $engine,
type_for => \%type_for,
charset => $charset,
};
}
sub sort_indexes {
my ( $self, $tbl ) = @_;
my @indexes
= sort {
(($a ne 'PRIMARY') <=> ($b ne 'PRIMARY'))
|| ( !$tbl->{keys}->{$a}->{is_unique} <=> !$tbl->{keys}->{$b}->{is_unique} )
|| ( $tbl->{keys}->{$a}->{is_nullable} <=> $tbl->{keys}->{$b}->{is_nullable} )
|| ( scalar(@{$tbl->{keys}->{$a}->{cols}}) <=> scalar(@{$tbl->{keys}->{$b}->{cols}}) )
}
grep {
$tbl->{keys}->{$_}->{type} eq 'BTREE'
}
sort keys %{$tbl->{keys}};
PTDEBUG && _d('Indexes sorted best-first:', join(', ', @indexes));
return @indexes;
}
sub find_best_index {
my ( $self, $tbl, $index ) = @_;
my $best;
if ( $index ) {
($best) = grep { uc $_ eq uc $index } keys %{$tbl->{keys}};
}
if ( !$best ) {
if ( $index ) {
die "Index '$index' does not exist in table";
}
else {
($best) = $self->sort_indexes($tbl);
}
}
PTDEBUG && _d('Best index found is', $best);
return $best;
}
sub find_possible_keys {
my ( $self, $dbh, $database, $table, $quoter, $where ) = @_;
return () unless $where;
my $sql = 'EXPLAIN SELECT * FROM ' . $quoter->quote($database, $table)
. ' WHERE ' . $where;
PTDEBUG && _d($sql);
my $expl = $dbh->selectrow_hashref($sql);
$expl = { map { lc($_) => $expl->{$_} } keys %$expl };
if ( $expl->{possible_keys} ) {
PTDEBUG && _d('possible_keys =', $expl->{possible_keys});
my @candidates = split(',', $expl->{possible_keys});
my %possible = map { $_ => 1 } @candidates;
if ( $expl->{key} ) {
PTDEBUG && _d('MySQL chose', $expl->{key});
unshift @candidates, grep { $possible{$_} } split(',', $expl->{key});
PTDEBUG && _d('Before deduping:', join(', ', @candidates));
my %seen;
@candidates = grep { !$seen{$_}++ } @candidates;
}
PTDEBUG && _d('Final list:', join(', ', @candidates));
return @candidates;
}
else {
PTDEBUG && _d('No keys in possible_keys');
return ();
}
}
sub check_table {
my ( $self, %args ) = @_;
my @required_args = qw(dbh db tbl);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($dbh, $db, $tbl) = @args{@required_args};
my $q = $self->{Quoter} || 'Quoter';
my $db_tbl = $q->quote($db, $tbl);
PTDEBUG && _d('Checking', $db_tbl);
my $sql = "SHOW TABLES FROM " . $q->quote($db)
. ' LIKE ' . $q->literal_like($tbl);
PTDEBUG && _d($sql);
my $row;
eval {
$row = $dbh->selectrow_arrayref($sql);
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d($EVAL_ERROR);
return 0;
}
if ( !$row->[0] || $row->[0] ne $tbl ) {
PTDEBUG && _d('Table does not exist');
return 0;
}
PTDEBUG && _d('Table', $db, $tbl, 'exists');
return 1;
}
sub get_engine {
my ( $self, $ddl, $opts ) = @_;
my ( $engine ) = $ddl =~ m/\).*?(?:ENGINE|TYPE)=(\w+)/;
PTDEBUG && _d('Storage engine:', $engine);
return $engine || undef;
}
sub get_keys {
my ( $self, $ddl, $opts, $is_nullable ) = @_;
my $engine = $self->get_engine($ddl);
my $keys = {};
my $clustered_key = undef;
KEY:
foreach my $key ( $ddl =~ m/^ ((?:[A-Z]+ )?KEY .*)$/gm ) {
next KEY if $key =~ m/FOREIGN/;
my $key_ddl = $key;
PTDEBUG && _d('Parsed key:', $key_ddl);
if ( !$engine || $engine !~ m/MEMORY|HEAP/ ) {
$key =~ s/USING HASH/USING BTREE/;
}
my ( $type, $cols ) = $key =~ m/(?:USING (\w+))? \((.+)\)/;
my ( $special ) = $key =~ m/(FULLTEXT|SPATIAL)/;
$type = $type || $special || 'BTREE';
my ($name) = $key =~ m/(PRIMARY|`[^`]*`)/;
my $unique = $key =~ m/PRIMARY|UNIQUE/ ? 1 : 0;
my @cols;
my @col_prefixes;
foreach my $col_def ( $cols =~ m/`[^`]+`(?:\(\d+\))?/g ) {
my ($name, $prefix) = $col_def =~ m/`([^`]+)`(?:\((\d+)\))?/;
push @cols, $name;
push @col_prefixes, $prefix;
}
$name =~ s/`//g;
PTDEBUG && _d( $name, 'key cols:', join(', ', map { "`$_`" } @cols));
$keys->{$name} = {
name => $name,
type => $type,
colnames => $cols,
cols => \@cols,
col_prefixes => \@col_prefixes,
is_unique => $unique,
is_nullable => scalar(grep { $is_nullable->{$_} } @cols),
is_col => { map { $_ => 1 } @cols },
ddl => $key_ddl,
};
if ( ($engine || '') =~ m/InnoDB/i && !$clustered_key ) {
my $this_key = $keys->{$name};
if ( $this_key->{name} eq 'PRIMARY' ) {
$clustered_key = 'PRIMARY';
}
elsif ( $this_key->{is_unique} && !$this_key->{is_nullable} ) {
$clustered_key = $this_key->{name};
}
PTDEBUG && $clustered_key && _d('This key is the clustered key');
}
}
return $keys, $clustered_key;
}
sub get_fks {
my ( $self, $ddl, $opts ) = @_;
my $q = $self->{Quoter};
my $fks = {};
foreach my $fk (
$ddl =~ m/CONSTRAINT .* FOREIGN KEY .* REFERENCES [^\)]*\)/mg )
{
my ( $name ) = $fk =~ m/CONSTRAINT `(.*?)`/;
my ( $cols ) = $fk =~ m/FOREIGN KEY \(([^\)]+)\)/;
my ( $parent, $parent_cols ) = $fk =~ m/REFERENCES (\S+) \(([^\)]+)\)/;
my ($db, $tbl) = $q->split_unquote($parent, $opts->{database});
my %parent_tbl = (tbl => $tbl);
$parent_tbl{db} = $db if $db;
if ( $parent !~ m/\./ && $opts->{database} ) {
$parent = $q->quote($opts->{database}) . ".$parent";
}
$fks->{$name} = {
name => $name,
colnames => $cols,
cols => [ map { s/[ `]+//g; $_; } split(',', $cols) ],
parent_tbl => \%parent_tbl,
parent_tblname => $parent,
parent_cols => [ map { s/[ `]+//g; $_; } split(',', $parent_cols) ],
parent_colnames=> $parent_cols,
ddl => $fk,
};
}
return $fks;
}
sub remove_auto_increment {
my ( $self, $ddl ) = @_;
$ddl =~ s/(^\).*?) AUTO_INCREMENT=\d+\b/$1/m;
return $ddl;
}
sub get_table_status {
my ( $self, $dbh, $db, $like ) = @_;
my $q = $self->{Quoter};
my $sql = "SHOW TABLE STATUS FROM " . $q->quote($db);
my @params;
if ( $like ) {
$sql .= ' LIKE ?';
push @params, $like;
}
PTDEBUG && _d($sql, @params);
my $sth = $dbh->prepare($sql);
eval { $sth->execute(@params); };
if ($EVAL_ERROR) {
PTDEBUG && _d($EVAL_ERROR);
return;
}
my @tables = @{$sth->fetchall_arrayref({})};
@tables = map {
my %tbl; # Make a copy with lowercased keys
@tbl{ map { lc $_ } keys %$_ } = values %$_;
$tbl{engine} ||= $tbl{type} || $tbl{comment};
delete $tbl{type};
\%tbl;
} @tables;
return @tables;
}
my $ansi_quote_re = qr/" [^"]* (?: "" [^"]* )* (?<=.) "/ismx;
sub ansi_to_legacy {
my ($self, $ddl) = @_;
$ddl =~ s/($ansi_quote_re)/ansi_quote_replace($1)/ge;
return $ddl;
}
sub ansi_quote_replace {
my ($val) = @_;
$val =~ s/^"|"$//g;
$val =~ s/`/``/g;
$val =~ s/""/"/g;
return "`$val`";
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End TableParser package
# ###########################################################################
# ###########################################################################
# Retry package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/Retry.pm
# t/lib/Retry.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package Retry;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Time::HiRes qw(sleep);
sub new {
my ( $class, %args ) = @_;
my $self = {
%args,
};
return bless $self, $class;
}
sub retry {
my ( $self, %args ) = @_;
my @required_args = qw(try fail final_fail);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
};
my ($try, $fail, $final_fail) = @args{@required_args};
my $wait = $args{wait} || sub { sleep 1; };
my $tries = $args{tries} || 3;
my $last_error;
my $tryno = 0;
TRY:
while ( ++$tryno <= $tries ) {
PTDEBUG && _d("Try", $tryno, "of", $tries);
my $result;
eval {
$result = $try->(tryno=>$tryno);
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d("Try code failed:", $EVAL_ERROR);
$last_error = $EVAL_ERROR;
if ( $tryno < $tries ) { # more retries
my $retry = $fail->(tryno=>$tryno, error=>$last_error);
last TRY unless $retry;
PTDEBUG && _d("Calling wait code");
$wait->(tryno=>$tryno);
}
}
else {
PTDEBUG && _d("Try code succeeded");
return $result;
}
}
PTDEBUG && _d('Try code did not succeed');
return $final_fail->(error=>$last_error);
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End Retry package
# ###########################################################################
# ###########################################################################
# Transformers package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/Transformers.pm
# t/lib/Transformers.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package Transformers;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Time::Local qw(timegm timelocal);
use Digest::MD5 qw(md5_hex);
use B qw();
BEGIN {
require Exporter;
our @ISA = qw(Exporter);
our %EXPORT_TAGS = ();
our @EXPORT = ();
our @EXPORT_OK = qw(
micro_t
percentage_of
secs_to_time
time_to_secs
shorten
ts
parse_timestamp
unix_timestamp
any_unix_timestamp
make_checksum
crc32
encode_json
);
}
our $mysql_ts = qr/(\d\d)(\d\d)(\d\d) +(\d+):(\d+):(\d+)(\.\d+)?/;
our $proper_ts = qr/(\d\d\d\d)-(\d\d)-(\d\d)[T ](\d\d):(\d\d):(\d\d)(\.\d+)?/;
our $n_ts = qr/(\d{1,5})([shmd]?)/; # Limit \d{1,5} because \d{6} looks
sub micro_t {
my ( $t, %args ) = @_;
my $p_ms = defined $args{p_ms} ? $args{p_ms} : 0; # precision for ms vals
my $p_s = defined $args{p_s} ? $args{p_s} : 0; # precision for s vals
my $f;
$t = 0 if $t < 0;
$t = sprintf('%.17f', $t) if $t =~ /e/;
$t =~ s/\.(\d{1,6})\d*/\.$1/;
if ($t > 0 && $t <= 0.000999) {
$f = ($t * 1000000) . 'us';
}
elsif ($t >= 0.001000 && $t <= 0.999999) {
$f = sprintf("%.${p_ms}f", $t * 1000);
$f = ($f * 1) . 'ms'; # * 1 to remove insignificant zeros
}
elsif ($t >= 1) {
$f = sprintf("%.${p_s}f", $t);
$f = ($f * 1) . 's'; # * 1 to remove insignificant zeros
}
else {
$f = 0; # $t should = 0 at this point
}
return $f;
}
sub percentage_of {
my ( $is, $of, %args ) = @_;
my $p = $args{p} || 0; # float precision
my $fmt = $p ? "%.${p}f" : "%d";
return sprintf $fmt, ($is * 100) / ($of ||= 1);
}
sub secs_to_time {
my ( $secs, $fmt ) = @_;
$secs ||= 0;
return '00:00' unless $secs;
$fmt ||= $secs >= 86_400 ? 'd'
: $secs >= 3_600 ? 'h'
: 'm';
return
$fmt eq 'd' ? sprintf(
"%d+%02d:%02d:%02d",
int($secs / 86_400),
int(($secs % 86_400) / 3_600),
int(($secs % 3_600) / 60),
$secs % 60)
: $fmt eq 'h' ? sprintf(
"%02d:%02d:%02d",
int(($secs % 86_400) / 3_600),
int(($secs % 3_600) / 60),
$secs % 60)
: sprintf(
"%02d:%02d",
int(($secs % 3_600) / 60),
$secs % 60);
}
sub time_to_secs {
my ( $val, $default_suffix ) = @_;
die "I need a val argument" unless defined $val;
my $t = 0;
my ( $prefix, $num, $suffix ) = $val =~ m/([+-]?)(\d+)([a-z])?$/;
$suffix = $suffix || $default_suffix || 's';
if ( $suffix =~ m/[smhd]/ ) {
$t = $suffix eq 's' ? $num * 1 # Seconds
: $suffix eq 'm' ? $num * 60 # Minutes
: $suffix eq 'h' ? $num * 3600 # Hours
: $num * 86400; # Days
$t *= -1 if $prefix && $prefix eq '-';
}
else {
die "Invalid suffix for $val: $suffix";
}
return $t;
}
sub shorten {
my ( $num, %args ) = @_;
my $p = defined $args{p} ? $args{p} : 2; # float precision
my $d = defined $args{d} ? $args{d} : 1_024; # divisor
my $n = 0;
my @units = ('', qw(k M G T P E Z Y));
while ( $num >= $d && $n < @units - 1 ) {
$num /= $d;
++$n;
}
return sprintf(
$num =~ m/\./ || $n
? "%.${p}f%s"
: '%d',
$num, $units[$n]);
}
sub ts {
my ( $time, $gmt ) = @_;
my ( $sec, $min, $hour, $mday, $mon, $year )
= $gmt ? gmtime($time) : localtime($time);
$mon += 1;
$year += 1900;
my $val = sprintf("%d-%02d-%02dT%02d:%02d:%02d",
$year, $mon, $mday, $hour, $min, $sec);
if ( my ($us) = $time =~ m/(\.\d+)$/ ) {
$us = sprintf("%.6f", $us);
$us =~ s/^0\././;
$val .= $us;
}
return $val;
}
sub parse_timestamp {
my ( $val ) = @_;
if ( my($y, $m, $d, $h, $i, $s, $f)
= $val =~ m/^$mysql_ts$/ )
{
return sprintf "%d-%02d-%02d %02d:%02d:"
. (defined $f ? '%09.6f' : '%02d'),
$y + 2000, $m, $d, $h, $i, (defined $f ? $s + $f : $s);
}
elsif ( $val =~ m/^$proper_ts$/ ) {
return $val;
}
return $val;
}
sub unix_timestamp {
my ( $val, $gmt ) = @_;
if ( my($y, $m, $d, $h, $i, $s, $us) = $val =~ m/^$proper_ts$/ ) {
$val = $gmt
? timegm($s, $i, $h, $d, $m - 1, $y)
: timelocal($s, $i, $h, $d, $m - 1, $y);
if ( defined $us ) {
$us = sprintf('%.6f', $us);
$us =~ s/^0\././;
$val .= $us;
}
}
return $val;
}
sub any_unix_timestamp {
my ( $val, $callback ) = @_;
if ( my ($n, $suffix) = $val =~ m/^$n_ts$/ ) {
$n = $suffix eq 's' ? $n # Seconds
: $suffix eq 'm' ? $n * 60 # Minutes
: $suffix eq 'h' ? $n * 3600 # Hours
: $suffix eq 'd' ? $n * 86400 # Days
: $n; # default: Seconds
PTDEBUG && _d('ts is now - N[shmd]:', $n);
return time - $n;
}
elsif ( $val =~ m/^\d{9,}/ ) {
PTDEBUG && _d('ts is already a unix timestamp');
return $val;
}
elsif ( my ($ymd, $hms) = $val =~ m/^(\d{6})(?:\s+(\d+:\d+:\d+))?/ ) {
PTDEBUG && _d('ts is MySQL slow log timestamp');
$val .= ' 00:00:00' unless $hms;
return unix_timestamp(parse_timestamp($val));
}
elsif ( ($ymd, $hms) = $val =~ m/^(\d{4}-\d\d-\d\d)(?:[T ](\d+:\d+:\d+))?/) {
PTDEBUG && _d('ts is properly formatted timestamp');
$val .= ' 00:00:00' unless $hms;
return unix_timestamp($val);
}
else {
PTDEBUG && _d('ts is MySQL expression');
return $callback->($val) if $callback && ref $callback eq 'CODE';
}
PTDEBUG && _d('Unknown ts type:', $val);
return;
}
sub make_checksum {
my ( $val ) = @_;
my $checksum = uc substr(md5_hex($val), -16);
PTDEBUG && _d($checksum, 'checksum for', $val);
return $checksum;
}
sub crc32 {
my ( $string ) = @_;
return unless $string;
my $poly = 0xEDB88320;
my $crc = 0xFFFFFFFF;
foreach my $char ( split(//, $string) ) {
my $comp = ($crc ^ ord($char)) & 0xFF;
for ( 1 .. 8 ) {
$comp = $comp & 1 ? $poly ^ ($comp >> 1) : $comp >> 1;
}
$crc = (($crc >> 8) & 0x00FFFFFF) ^ $comp;
}
return $crc ^ 0xFFFFFFFF;
}
my $got_json = eval { require JSON };
sub encode_json {
return JSON::encode_json(@_) if $got_json;
my ( $data ) = @_;
return (object_to_json($data) || '');
}
sub object_to_json {
my ($obj) = @_;
my $type = ref($obj);
if($type eq 'HASH'){
return hash_to_json($obj);
}
elsif($type eq 'ARRAY'){
return array_to_json($obj);
}
else {
return value_to_json($obj);
}
}
sub hash_to_json {
my ($obj) = @_;
my @res;
for my $k ( sort { $a cmp $b } keys %$obj ) {
push @res, string_to_json( $k )
. ":"
. ( object_to_json( $obj->{$k} ) || value_to_json( $obj->{$k} ) );
}
return '{' . ( @res ? join( ",", @res ) : '' ) . '}';
}
sub array_to_json {
my ($obj) = @_;
my @res;
for my $v (@$obj) {
push @res, object_to_json($v) || value_to_json($v);
}
return '[' . ( @res ? join( ",", @res ) : '' ) . ']';
}
sub value_to_json {
my ($value) = @_;
return 'null' if(!defined $value);
my $b_obj = B::svref_2object(\$value); # for round trip problem
my $flags = $b_obj->FLAGS;
return $value # as is
if $flags & ( B::SVp_IOK | B::SVp_NOK ) and !( $flags & B::SVp_POK ); # SvTYPE is IV or NV?
my $type = ref($value);
if( !$type ) {
return string_to_json($value);
}
else {
return 'null';
}
}
my %esc = (
"\n" => '\n',
"\r" => '\r',
"\t" => '\t',
"\f" => '\f',
"\b" => '\b',
"\"" => '\"',
"\\" => '\\\\',
"\'" => '\\\'',
);
sub string_to_json {
my ($arg) = @_;
$arg =~ s/([\x22\x5c\n\r\t\f\b])/$esc{$1}/g;
$arg =~ s/\//\\\//g;
$arg =~ s/([\x00-\x08\x0b\x0e-\x1f])/'\\u00' . unpack('H2', $1)/eg;
utf8::upgrade($arg);
utf8::encode($arg);
return '"' . $arg . '"';
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End Transformers package
# ###########################################################################
# ###########################################################################
# HTTP::Micro package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/HTTP/Micro.pm
# t/lib/HTTP/Micro.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package HTTP::Micro;
our $VERSION = '0.01';
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use Carp ();
my @attributes;
BEGIN {
@attributes = qw(agent timeout);
no strict 'refs';
for my $accessor ( @attributes ) {
*{$accessor} = sub {
@_ > 1 ? $_[0]->{$accessor} = $_[1] : $_[0]->{$accessor};
};
}
}
sub new {
my($class, %args) = @_;
(my $agent = $class) =~ s{::}{-}g;
my $self = {
agent => $agent . "/" . ($class->VERSION || 0),
timeout => 60,
};
for my $key ( @attributes ) {
$self->{$key} = $args{$key} if exists $args{$key}
}
return bless $self, $class;
}
my %DefaultPort = (
http => 80,
https => 443,
);
sub request {
my ($self, $method, $url, $args) = @_;
@_ == 3 || (@_ == 4 && ref $args eq 'HASH')
or Carp::croak(q/Usage: $http->request(METHOD, URL, [HASHREF])/);
$args ||= {}; # we keep some state in this during _request
my $response;
for ( 0 .. 1 ) {
$response = eval { $self->_request($method, $url, $args) };
last unless $@ && $method eq 'GET'
&& $@ =~ m{^(?:Socket closed|Unexpected end)};
}
if (my $e = "$@") {
$response = {
success => q{},
status => 599,
reason => 'Internal Exception',
content => $e,
headers => {
'content-type' => 'text/plain',
'content-length' => length $e,
}
};
}
return $response;
}
sub _request {
my ($self, $method, $url, $args) = @_;
my ($scheme, $host, $port, $path_query) = $self->_split_url($url);
my $request = {
method => $method,
scheme => $scheme,
host_port => ($port == $DefaultPort{$scheme} ? $host : "$host:$port"),
uri => $path_query,
headers => {},
};
my $handle = HTTP::Micro::Handle->new(timeout => $self->{timeout});
$handle->connect($scheme, $host, $port);
$self->_prepare_headers_and_cb($request, $args);
$handle->write_request_header(@{$request}{qw/method uri headers/});
$handle->write_content_body($request) if $request->{content};
my $response;
do { $response = $handle->read_response_header }
until (substr($response->{status},0,1) ne '1');
if (!($method eq 'HEAD' || $response->{status} =~ /^[23]04/)) {
$response->{content} = '';
$handle->read_content_body(sub { $_[1]->{content} .= $_[0] }, $response);
}
$handle->close;
$response->{success} = substr($response->{status},0,1) eq '2';
return $response;
}
sub _prepare_headers_and_cb {
my ($self, $request, $args) = @_;
for ($args->{headers}) {
next unless defined;
while (my ($k, $v) = each %$_) {
$request->{headers}{lc $k} = $v;
}
}
$request->{headers}{'host'} = $request->{host_port};
$request->{headers}{'connection'} = "close";
$request->{headers}{'user-agent'} ||= $self->{agent};
if (defined $args->{content}) {
$request->{headers}{'content-type'} ||= "application/octet-stream";
utf8::downgrade($args->{content}, 1)
or Carp::croak(q/Wide character in request message body/);
$request->{headers}{'content-length'} = length $args->{content};
$request->{content} = $args->{content};
}
return;
}
sub _split_url {
my $url = pop;
my ($scheme, $authority, $path_query) = $url =~ m<\A([^:/?#]+)://([^/?#]*)([^#]*)>
or Carp::croak(qq/Cannot parse URL: '$url'/);
$scheme = lc $scheme;
$path_query = "/$path_query" unless $path_query =~ m<\A/>;
my $host = (length($authority)) ? lc $authority : 'localhost';
$host =~ s/\A[^@]*@//; # userinfo
my $port = do {
$host =~ s/:([0-9]*)\z// && length $1
? $1
: $DefaultPort{$scheme}
};
return ($scheme, $host, $port, $path_query);
}
} # HTTP::Micro
{
package HTTP::Micro::Handle;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use Carp qw(croak);
use Errno qw(EINTR EPIPE);
use IO::Socket qw(SOCK_STREAM);
sub BUFSIZE () { 32768 }
my $Printable = sub {
local $_ = shift;
s/\r/\\r/g;
s/\n/\\n/g;
s/\t/\\t/g;
s/([^\x20-\x7E])/sprintf('\\x%.2X', ord($1))/ge;
$_;
};
sub new {
my ($class, %args) = @_;
return bless {
rbuf => '',
timeout => 60,
max_line_size => 16384,
%args
}, $class;
}
my $ssl_verify_args = {
check_cn => "when_only",
wildcards_in_alt => "anywhere",
wildcards_in_cn => "anywhere"
};
sub connect {
@_ == 4 || croak(q/Usage: $handle->connect(scheme, host, port)/);
my ($self, $scheme, $host, $port) = @_;
if ( $scheme eq 'https' ) {
eval "require IO::Socket::SSL"
unless exists $INC{'IO/Socket/SSL.pm'};
croak(qq/IO::Socket::SSL must be installed for https support\n/)
unless $INC{'IO/Socket/SSL.pm'};
}
elsif ( $scheme ne 'http' ) {
croak(qq/Unsupported URL scheme '$scheme'\n/);
}
$self->{fh} = IO::Socket::INET->new(
PeerHost => $host,
PeerPort => $port,
Proto => 'tcp',
Type => SOCK_STREAM,
Timeout => $self->{timeout}
) or croak(qq/Could not connect to '$host:$port': $@/);
binmode($self->{fh})
or croak(qq/Could not binmode() socket: '$!'/);
if ( $scheme eq 'https') {
IO::Socket::SSL->start_SSL($self->{fh});
ref($self->{fh}) eq 'IO::Socket::SSL'
or die(qq/SSL connection failed for $host\n/);
if ( $self->{fh}->can("verify_hostname") ) {
$self->{fh}->verify_hostname( $host, $ssl_verify_args )
or die(qq/SSL certificate not valid for $host\n/);
}
else {
my $fh = $self->{fh};
_verify_hostname_of_cert($host, _peer_certificate($fh), $ssl_verify_args)
or die(qq/SSL certificate not valid for $host\n/);
}
}
$self->{host} = $host;
$self->{port} = $port;
return $self;
}
sub close {
@_ == 1 || croak(q/Usage: $handle->close()/);
my ($self) = @_;
CORE::close($self->{fh})
or croak(qq/Could not close socket: '$!'/);
}
sub write {
@_ == 2 || croak(q/Usage: $handle->write(buf)/);
my ($self, $buf) = @_;
my $len = length $buf;
my $off = 0;
local $SIG{PIPE} = 'IGNORE';
while () {
$self->can_write
or croak(q/Timed out while waiting for socket to become ready for writing/);
my $r = syswrite($self->{fh}, $buf, $len, $off);
if (defined $r) {
$len -= $r;
$off += $r;
last unless $len > 0;
}
elsif ($! == EPIPE) {
croak(qq/Socket closed by remote server: $!/);
}
elsif ($! != EINTR) {
croak(qq/Could not write to socket: '$!'/);
}
}
return $off;
}
sub read {
@_ == 2 || @_ == 3 || croak(q/Usage: $handle->read(len)/);
my ($self, $len) = @_;
my $buf = '';
my $got = length $self->{rbuf};
if ($got) {
my $take = ($got < $len) ? $got : $len;
$buf = substr($self->{rbuf}, 0, $take, '');
$len -= $take;
}
while ($len > 0) {
$self->can_read
or croak(q/Timed out while waiting for socket to become ready for reading/);
my $r = sysread($self->{fh}, $buf, $len, length $buf);
if (defined $r) {
last unless $r;
$len -= $r;
}
elsif ($! != EINTR) {
croak(qq/Could not read from socket: '$!'/);
}
}
if ($len) {
croak(q/Unexpected end of stream/);
}
return $buf;
}
sub readline {
@_ == 1 || croak(q/Usage: $handle->readline()/);
my ($self) = @_;
while () {
if ($self->{rbuf} =~ s/\A ([^\x0D\x0A]* \x0D?\x0A)//x) {
return $1;
}
$self->can_read
or croak(q/Timed out while waiting for socket to become ready for reading/);
my $r = sysread($self->{fh}, $self->{rbuf}, BUFSIZE, length $self->{rbuf});
if (defined $r) {
last unless $r;
}
elsif ($! != EINTR) {
croak(qq/Could not read from socket: '$!'/);
}
}
croak(q/Unexpected end of stream while looking for line/);
}
sub read_header_lines {
@_ == 1 || @_ == 2 || croak(q/Usage: $handle->read_header_lines([headers])/);
my ($self, $headers) = @_;
$headers ||= {};
my $lines = 0;
my $val;
while () {
my $line = $self->readline;
if ($line =~ /\A ([^\x00-\x1F\x7F:]+) : [\x09\x20]* ([^\x0D\x0A]*)/x) {
my ($field_name) = lc $1;
$val = \($headers->{$field_name} = $2);
}
elsif ($line =~ /\A [\x09\x20]+ ([^\x0D\x0A]*)/x) {
$val
or croak(q/Unexpected header continuation line/);
next unless length $1;
$$val .= ' ' if length $$val;
$$val .= $1;
}
elsif ($line =~ /\A \x0D?\x0A \z/x) {
last;
}
else {
croak(q/Malformed header line: / . $Printable->($line));
}
}
return $headers;
}
sub write_header_lines {
(@_ == 2 && ref $_[1] eq 'HASH') || croak(q/Usage: $handle->write_header_lines(headers)/);
my($self, $headers) = @_;
my $buf = '';
while (my ($k, $v) = each %$headers) {
my $field_name = lc $k;
$field_name =~ /\A [\x21\x23-\x27\x2A\x2B\x2D\x2E\x30-\x39\x41-\x5A\x5E-\x7A\x7C\x7E]+ \z/x
or croak(q/Invalid HTTP header field name: / . $Printable->($field_name));
$field_name =~ s/\b(\w)/\u$1/g;
$buf .= "$field_name: $v\x0D\x0A";
}
$buf .= "\x0D\x0A";
return $self->write($buf);
}
sub read_content_body {
@_ == 3 || @_ == 4 || croak(q/Usage: $handle->read_content_body(callback, response, [read_length])/);
my ($self, $cb, $response, $len) = @_;
$len ||= $response->{headers}{'content-length'};
croak("No content-length in the returned response, and this "
. "UA doesn't implement chunking") unless defined $len;
while ($len > 0) {
my $read = ($len > BUFSIZE) ? BUFSIZE : $len;
$cb->($self->read($read), $response);
$len -= $read;
}
return;
}
sub write_content_body {
@_ == 2 || croak(q/Usage: $handle->write_content_body(request)/);
my ($self, $request) = @_;
my ($len, $content_length) = (0, $request->{headers}{'content-length'});
$len += $self->write($request->{content});
$len == $content_length
or croak(qq/Content-Length missmatch (got: $len expected: $content_length)/);
return $len;
}
sub read_response_header {
@_ == 1 || croak(q/Usage: $handle->read_response_header()/);
my ($self) = @_;
my $line = $self->readline;
$line =~ /\A (HTTP\/(0*\d+\.0*\d+)) [\x09\x20]+ ([0-9]{3}) [\x09\x20]+ ([^\x0D\x0A]*) \x0D?\x0A/x
or croak(q/Malformed Status-Line: / . $Printable->($line));
my ($protocol, $version, $status, $reason) = ($1, $2, $3, $4);
return {
status => $status,
reason => $reason,
headers => $self->read_header_lines,
protocol => $protocol,
};
}
sub write_request_header {
@_ == 4 || croak(q/Usage: $handle->write_request_header(method, request_uri, headers)/);
my ($self, $method, $request_uri, $headers) = @_;
return $self->write("$method $request_uri HTTP/1.1\x0D\x0A")
+ $self->write_header_lines($headers);
}
sub _do_timeout {
my ($self, $type, $timeout) = @_;
$timeout = $self->{timeout}
unless defined $timeout && $timeout >= 0;
my $fd = fileno $self->{fh};
defined $fd && $fd >= 0
or croak(q/select(2): 'Bad file descriptor'/);
my $initial = time;
my $pending = $timeout;
my $nfound;
vec(my $fdset = '', $fd, 1) = 1;
while () {
$nfound = ($type eq 'read')
? select($fdset, undef, undef, $pending)
: select(undef, $fdset, undef, $pending) ;
if ($nfound == -1) {
$! == EINTR
or croak(qq/select(2): '$!'/);
redo if !$timeout || ($pending = $timeout - (time - $initial)) > 0;
$nfound = 0;
}
last;
}
$! = 0;
return $nfound;
}
sub can_read {
@_ == 1 || @_ == 2 || croak(q/Usage: $handle->can_read([timeout])/);
my $self = shift;
return $self->_do_timeout('read', @_)
}
sub can_write {
@_ == 1 || @_ == 2 || croak(q/Usage: $handle->can_write([timeout])/);
my $self = shift;
return $self->_do_timeout('write', @_)
}
} # HTTP::Micro::Handle
my $prog = <<'EOP';
BEGIN {
if ( defined &IO::Socket::SSL::CAN_IPV6 ) {
*CAN_IPV6 = \*IO::Socket::SSL::CAN_IPV6;
}
else {
constant->import( CAN_IPV6 => '' );
}
my %const = (
NID_CommonName => 13,
GEN_DNS => 2,
GEN_IPADD => 7,
);
while ( my ($name,$value) = each %const ) {
no strict 'refs';
*{$name} = UNIVERSAL::can( 'Net::SSLeay', $name ) || sub { $value };
}
}
{
use Carp qw(croak);
my %dispatcher = (
issuer => sub { Net::SSLeay::X509_NAME_oneline( Net::SSLeay::X509_get_issuer_name( shift )) },
subject => sub { Net::SSLeay::X509_NAME_oneline( Net::SSLeay::X509_get_subject_name( shift )) },
);
if ( $Net::SSLeay::VERSION >= 1.30 ) {
$dispatcher{commonName} = sub {
my $cn = Net::SSLeay::X509_NAME_get_text_by_NID(
Net::SSLeay::X509_get_subject_name( shift ), NID_CommonName);
$cn =~s{\0$}{}; # work around Bug in Net::SSLeay <1.33
$cn;
}
} else {
$dispatcher{commonName} = sub {
croak "you need at least Net::SSLeay version 1.30 for getting commonName"
}
}
if ( $Net::SSLeay::VERSION >= 1.33 ) {
$dispatcher{subjectAltNames} = sub { Net::SSLeay::X509_get_subjectAltNames( shift ) };
} else {
$dispatcher{subjectAltNames} = sub {
return;
};
}
$dispatcher{authority} = $dispatcher{issuer};
$dispatcher{owner} = $dispatcher{subject};
$dispatcher{cn} = $dispatcher{commonName};
sub _peer_certificate {
my ($self, $field) = @_;
my $ssl = $self->_get_ssl_object or return;
my $cert = ${*$self}{_SSL_certificate}
||= Net::SSLeay::get_peer_certificate($ssl)
or return $self->error("Could not retrieve peer certificate");
if ($field) {
my $sub = $dispatcher{$field} or croak
"invalid argument for peer_certificate, valid are: ".join( " ",keys %dispatcher ).
"\nMaybe you need to upgrade your Net::SSLeay";
return $sub->($cert);
} else {
return $cert
}
}
my %scheme = (
ldap => {
wildcards_in_cn => 0,
wildcards_in_alt => 'leftmost',
check_cn => 'always',
},
http => {
wildcards_in_cn => 'anywhere',
wildcards_in_alt => 'anywhere',
check_cn => 'when_only',
},
smtp => {
wildcards_in_cn => 0,
wildcards_in_alt => 0,
check_cn => 'always'
},
none => {}, # do not check
);
$scheme{www} = $scheme{http}; # alias
$scheme{xmpp} = $scheme{http}; # rfc 3920
$scheme{pop3} = $scheme{ldap}; # rfc 2595
$scheme{imap} = $scheme{ldap}; # rfc 2595
$scheme{acap} = $scheme{ldap}; # rfc 2595
$scheme{nntp} = $scheme{ldap}; # rfc 4642
$scheme{ftp} = $scheme{http}; # rfc 4217
sub _verify_hostname_of_cert {
my $identity = shift;
my $cert = shift;
my $scheme = shift || 'none';
if ( ! ref($scheme) ) {
$scheme = $scheme{$scheme} or croak "scheme $scheme not defined";
}
return 1 if ! %$scheme; # 'none'
my $commonName = $dispatcher{cn}->($cert);
my @altNames = $dispatcher{subjectAltNames}->($cert);
if ( my $sub = $scheme->{callback} ) {
return $sub->($identity,$commonName,@altNames);
}
my $ipn;
if ( CAN_IPV6 and $identity =~m{:} ) {
$ipn = IO::Socket::SSL::inet_pton(IO::Socket::SSL::AF_INET6,$identity)
or croak "'$identity' is not IPv6, but neither IPv4 nor hostname";
} elsif ( $identity =~m{^\d+\.\d+\.\d+\.\d+$} ) {
$ipn = IO::Socket::SSL::inet_aton( $identity ) or croak "'$identity' is not IPv4, but neither IPv6 nor hostname";
} else {
if ( $identity =~m{[^a-zA-Z0-9_.\-]} ) {
$identity =~m{\0} and croak("name '$identity' has \\0 byte");
$identity = IO::Socket::SSL::idn_to_ascii($identity) or
croak "Warning: Given name '$identity' could not be converted to IDNA!";
}
}
my $check_name = sub {
my ($name,$identity,$wtyp) = @_;
$wtyp ||= '';
my $pattern;
if ( $wtyp eq 'anywhere' and $name =~m{^([a-zA-Z0-9_\-]*)\*(.+)} ) {
$pattern = qr{^\Q$1\E[a-zA-Z0-9_\-]*\Q$2\E$}i;
} elsif ( $wtyp eq 'leftmost' and $name =~m{^\*(\..+)$} ) {
$pattern = qr{^[a-zA-Z0-9_\-]*\Q$1\E$}i;
} else {
$pattern = qr{^\Q$name\E$}i;
}
return $identity =~ $pattern;
};
my $alt_dnsNames = 0;
while (@altNames) {
my ($type, $name) = splice (@altNames, 0, 2);
if ( $ipn and $type == GEN_IPADD ) {
return 1 if $ipn eq $name;
} elsif ( ! $ipn and $type == GEN_DNS ) {
$name =~s/\s+$//; $name =~s/^\s+//;
$alt_dnsNames++;
$check_name->($name,$identity,$scheme->{wildcards_in_alt})
and return 1;
}
}
if ( ! $ipn and (
$scheme->{check_cn} eq 'always' or
$scheme->{check_cn} eq 'when_only' and !$alt_dnsNames)) {
$check_name->($commonName,$identity,$scheme->{wildcards_in_cn})
and return 1;
}
return 0; # no match
}
}
EOP
eval { require IO::Socket::SSL };
if ( $INC{"IO/Socket/SSL.pm"} ) {
eval $prog;
die $@ if $@;
}
1;
# ###########################################################################
# End HTTP::Micro package
# ###########################################################################
# ###########################################################################
# VersionCheck package
# This package is a copy without comments from the original. The original
# with comments and its test file can be found in the Bazaar repository at,
# lib/VersionCheck.pm
# t/lib/VersionCheck.t
# See https://launchpad.net/percona-toolkit for more information.
# ###########################################################################
{
package VersionCheck;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
use Data::Dumper;
local $Data::Dumper::Indent = 1;
local $Data::Dumper::Sortkeys = 1;
local $Data::Dumper::Quotekeys = 0;
use Digest::MD5 qw(md5_hex);
use Sys::Hostname qw(hostname);
use File::Basename qw();
use File::Spec;
use FindBin qw();
eval {
require Percona::Toolkit;
require HTTP::Micro;
};
{
my $file = 'percona-version-check';
my $home = $ENV{HOME} || $ENV{HOMEPATH} || $ENV{USERPROFILE} || '.';
my @vc_dirs = (
'/etc/percona',
'/etc/percona-toolkit',
'/tmp',
"$home",
);
sub version_check_file {
foreach my $dir ( @vc_dirs ) {
if ( -d $dir && -w $dir ) {
PTDEBUG && _d('Version check file', $file, 'in', $dir);
return $dir . '/' . $file;
}
}
PTDEBUG && _d('Version check file', $file, 'in', $ENV{PWD});
return $file; # in the CWD
}
}
sub version_check_time_limit {
return 60 * 60 * 24; # one day
}
sub version_check {
my (%args) = @_;
my $instances = $args{instances} || [];
my $instances_to_check;
PTDEBUG && _d('FindBin::Bin:', $FindBin::Bin);
if ( !$args{force} ) {
if ( $FindBin::Bin
&& (-d "$FindBin::Bin/../.bzr" ||
-d "$FindBin::Bin/../../.bzr" ||
-d "$FindBin::Bin/../.git" ||
-d "$FindBin::Bin/../../.git"
)
) {
PTDEBUG && _d("$FindBin::Bin/../.bzr disables --version-check");
return;
}
}
eval {
foreach my $instance ( @$instances ) {
my ($name, $id) = get_instance_id($instance);
$instance->{name} = $name;
$instance->{id} = $id;
}
push @$instances, { name => 'system', id => 0 };
$instances_to_check = get_instances_to_check(
instances => $instances,
vc_file => $args{vc_file}, # testing
now => $args{now}, # testing
);
PTDEBUG && _d(scalar @$instances_to_check, 'instances to check');
return unless @$instances_to_check;
my $protocol = 'https';
eval { require IO::Socket::SSL; };
if ( $EVAL_ERROR ) {
PTDEBUG && _d($EVAL_ERROR);
PTDEBUG && _d("SSL not available, won't run version_check");
return;
}
PTDEBUG && _d('Using', $protocol);
my $advice = pingback(
instances => $instances_to_check,
protocol => $protocol,
url => $args{url} # testing
|| $ENV{PERCONA_VERSION_CHECK_URL} # testing
|| "$protocol://v.percona.com",
);
if ( $advice ) {
PTDEBUG && _d('Advice:', Dumper($advice));
if ( scalar @$advice > 1) {
print "\n# " . scalar @$advice . " software updates are "
. "available:\n";
}
else {
print "\n# A software update is available:\n";
}
print join("\n", map { "# * $_" } @$advice), "\n\n";
}
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d('Version check failed:', $EVAL_ERROR);
}
if ( @$instances_to_check ) {
eval {
update_check_times(
instances => $instances_to_check,
vc_file => $args{vc_file}, # testing
now => $args{now}, # testing
);
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d('Error updating version check file:', $EVAL_ERROR);
}
}
if ( $ENV{PTDEBUG_VERSION_CHECK} ) {
warn "Exiting because the PTDEBUG_VERSION_CHECK "
. "environment variable is defined.\n";
exit 255;
}
return;
}
sub get_instances_to_check {
my (%args) = @_;
my $instances = $args{instances};
my $now = $args{now} || int(time);
my $vc_file = $args{vc_file} || version_check_file();
if ( !-f $vc_file ) {
PTDEBUG && _d('Version check file', $vc_file, 'does not exist;',
'version checking all instances');
return $instances;
}
open my $fh, '<', $vc_file or die "Cannot open $vc_file: $OS_ERROR";
chomp(my $file_contents = do { local $/ = undef; <$fh> });
PTDEBUG && _d('Version check file', $vc_file, 'contents:', $file_contents);
close $fh;
my %last_check_time_for = $file_contents =~ /^([^,]+),(.+)$/mg;
my $check_time_limit = version_check_time_limit();
my @instances_to_check;
foreach my $instance ( @$instances ) {
my $last_check_time = $last_check_time_for{ $instance->{id} };
PTDEBUG && _d('Intsance', $instance->{id}, 'last checked',
$last_check_time, 'now', $now, 'diff', $now - ($last_check_time || 0),
'hours until next check',
sprintf '%.2f',
($check_time_limit - ($now - ($last_check_time || 0))) / 3600);
if ( !defined $last_check_time
|| ($now - $last_check_time) >= $check_time_limit ) {
PTDEBUG && _d('Time to check', Dumper($instance));
push @instances_to_check, $instance;
}
}
return \@instances_to_check;
}
sub update_check_times {
my (%args) = @_;
my $instances = $args{instances};
my $now = $args{now} || int(time);
my $vc_file = $args{vc_file} || version_check_file();
PTDEBUG && _d('Updating last check time:', $now);
my %all_instances = map {
$_->{id} => { name => $_->{name}, ts => $now }
} @$instances;
if ( -f $vc_file ) {
open my $fh, '<', $vc_file or die "Cannot read $vc_file: $OS_ERROR";
my $contents = do { local $/ = undef; <$fh> };
close $fh;
foreach my $line ( split("\n", ($contents || '')) ) {
my ($id, $ts) = split(',', $line);
if ( !exists $all_instances{$id} ) {
$all_instances{$id} = { ts => $ts }; # original ts, not updated
}
}
}
open my $fh, '>', $vc_file or die "Cannot write to $vc_file: $OS_ERROR";
foreach my $id ( sort keys %all_instances ) {
PTDEBUG && _d('Updated:', $id, Dumper($all_instances{$id}));
print { $fh } $id . ',' . $all_instances{$id}->{ts} . "\n";
}
close $fh;
return;
}
sub get_instance_id {
my ($instance) = @_;
my $dbh = $instance->{dbh};
my $dsn = $instance->{dsn};
my $sql = q{SELECT CONCAT(@@hostname, @@port)};
PTDEBUG && _d($sql);
my ($name) = eval { $dbh->selectrow_array($sql) };
if ( $EVAL_ERROR ) {
PTDEBUG && _d($EVAL_ERROR);
$sql = q{SELECT @@hostname};
PTDEBUG && _d($sql);
($name) = eval { $dbh->selectrow_array($sql) };
if ( $EVAL_ERROR ) {
PTDEBUG && _d($EVAL_ERROR);
$name = ($dsn->{h} || 'localhost') . ($dsn->{P} || 3306);
}
else {
$sql = q{SHOW VARIABLES LIKE 'port'};
PTDEBUG && _d($sql);
my (undef, $port) = eval { $dbh->selectrow_array($sql) };
PTDEBUG && _d('port:', $port);
$name .= $port || '';
}
}
my $id = md5_hex($name);
PTDEBUG && _d('MySQL instance:', $id, $name, Dumper($dsn));
return $name, $id;
}
sub pingback {
my (%args) = @_;
my @required_args = qw(url instances);
foreach my $arg ( @required_args ) {
die "I need a $arg arugment" unless $args{$arg};
}
my $url = $args{url};
my $instances = $args{instances};
my $ua = $args{ua} || HTTP::Micro->new( timeout => 3 );
my $response = $ua->request('GET', $url);
PTDEBUG && _d('Server response:', Dumper($response));
die "No response from GET $url"
if !$response;
die("GET on $url returned HTTP status $response->{status}; expected 200\n",
($response->{content} || '')) if $response->{status} != 200;
die("GET on $url did not return any programs to check")
if !$response->{content};
my $items = parse_server_response(
response => $response->{content}
);
die "Failed to parse server requested programs: $response->{content}"
if !scalar keys %$items;
my $versions = get_versions(
items => $items,
instances => $instances,
);
die "Failed to get any program versions; should have at least gotten Perl"
if !scalar keys %$versions;
my $client_content = encode_client_response(
items => $items,
versions => $versions,
general_id => md5_hex( hostname() ),
);
my $client_response = {
headers => { "X-Percona-Toolkit-Tool" => File::Basename::basename($0) },
content => $client_content,
};
PTDEBUG && _d('Client response:', Dumper($client_response));
$response = $ua->request('POST', $url, $client_response);
PTDEBUG && _d('Server suggestions:', Dumper($response));
die "No response from POST $url $client_response"
if !$response;
die "POST $url returned HTTP status $response->{status}; expected 200"
if $response->{status} != 200;
return unless $response->{content};
$items = parse_server_response(
response => $response->{content},
split_vars => 0,
);
die "Failed to parse server suggestions: $response->{content}"
if !scalar keys %$items;
my @suggestions = map { $_->{vars} }
sort { $a->{item} cmp $b->{item} }
values %$items;
return \@suggestions;
}
sub encode_client_response {
my (%args) = @_;
my @required_args = qw(items versions general_id);
foreach my $arg ( @required_args ) {
die "I need a $arg arugment" unless $args{$arg};
}
my ($items, $versions, $general_id) = @args{@required_args};
my @lines;
foreach my $item ( sort keys %$items ) {
next unless exists $versions->{$item};
if ( ref($versions->{$item}) eq 'HASH' ) {
my $mysql_versions = $versions->{$item};
for my $id ( sort keys %$mysql_versions ) {
push @lines, join(';', $id, $item, $mysql_versions->{$id});
}
}
else {
push @lines, join(';', $general_id, $item, $versions->{$item});
}
}
my $client_response = join("\n", @lines) . "\n";
return $client_response;
}
sub parse_server_response {
my (%args) = @_;
my @required_args = qw(response);
foreach my $arg ( @required_args ) {
die "I need a $arg arugment" unless $args{$arg};
}
my ($response) = @args{@required_args};
my %items = map {
my ($item, $type, $vars) = split(";", $_);
if ( !defined $args{split_vars} || $args{split_vars} ) {
$vars = [ split(",", ($vars || '')) ];
}
$item => {
item => $item,
type => $type,
vars => $vars,
};
} split("\n", $response);
PTDEBUG && _d('Items:', Dumper(\%items));
return \%items;
}
my %sub_for_type = (
os_version => \&get_os_version,
perl_version => \&get_perl_version,
perl_module_version => \&get_perl_module_version,
mysql_variable => \&get_mysql_variable,
);
sub valid_item {
my ($item) = @_;
return unless $item;
if ( !exists $sub_for_type{ $item->{type} } ) {
PTDEBUG && _d('Invalid type:', $item->{type});
return 0;
}
return 1;
}
sub get_versions {
my (%args) = @_;
my @required_args = qw(items);
foreach my $arg ( @required_args ) {
die "I need a $arg arugment" unless $args{$arg};
}
my ($items) = @args{@required_args};
my %versions;
foreach my $item ( values %$items ) {
next unless valid_item($item);
eval {
my $version = $sub_for_type{ $item->{type} }->(
item => $item,
instances => $args{instances},
);
if ( $version ) {
chomp $version unless ref($version);
$versions{$item->{item}} = $version;
}
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d('Error getting version for', Dumper($item), $EVAL_ERROR);
}
}
return \%versions;
}
sub get_os_version {
if ( $OSNAME eq 'MSWin32' ) {
require Win32;
return Win32::GetOSDisplayName();
}
chomp(my $platform = `uname -s`);
PTDEBUG && _d('platform:', $platform);
return $OSNAME unless $platform;
chomp(my $lsb_release
= `which lsb_release 2>/dev/null | awk '{print \$1}'` || '');
PTDEBUG && _d('lsb_release:', $lsb_release);
my $release = "";
if ( $platform eq 'Linux' ) {
if ( -f "/etc/fedora-release" ) {
$release = `cat /etc/fedora-release`;
}
elsif ( -f "/etc/redhat-release" ) {
$release = `cat /etc/redhat-release`;
}
elsif ( -f "/etc/system-release" ) {
$release = `cat /etc/system-release`;
}
elsif ( $lsb_release ) {
$release = `$lsb_release -ds`;
}
elsif ( -f "/etc/lsb-release" ) {
$release = `grep DISTRIB_DESCRIPTION /etc/lsb-release`;
$release =~ s/^\w+="([^"]+)".+/$1/;
}
elsif ( -f "/etc/debian_version" ) {
chomp(my $rel = `cat /etc/debian_version`);
$release = "Debian $rel";
if ( -f "/etc/apt/sources.list" ) {
chomp(my $code_name = `awk '/^deb/ {print \$3}' /etc/apt/sources.list | awk -F/ '{print \$1}'| awk 'BEGIN {FS="|"} {print \$1}' | sort | uniq -c | sort -rn | head -n1 | awk '{print \$2}'`);
$release .= " ($code_name)" if $code_name;
}
}
elsif ( -f "/etc/os-release" ) { # openSUSE
chomp($release = `grep PRETTY_NAME /etc/os-release`);
$release =~ s/^PRETTY_NAME="(.+)"$/$1/;
}
elsif ( `ls /etc/*release 2>/dev/null` ) {
if ( `grep DISTRIB_DESCRIPTION /etc/*release 2>/dev/null` ) {
$release = `grep DISTRIB_DESCRIPTION /etc/*release | head -n1`;
}
else {
$release = `cat /etc/*release | head -n1`;
}
}
}
elsif ( $platform =~ m/(?:BSD|^Darwin)$/ ) {
my $rel = `uname -r`;
$release = "$platform $rel";
}
elsif ( $platform eq "SunOS" ) {
my $rel = `head -n1 /etc/release` || `uname -r`;
$release = "$platform $rel";
}
if ( !$release ) {
PTDEBUG && _d('Failed to get the release, using platform');
$release = $platform;
}
chomp($release);
$release =~ s/^"|"$//g;
PTDEBUG && _d('OS version =', $release);
return $release;
}
sub get_perl_version {
my (%args) = @_;
my $item = $args{item};
return unless $item;
my $version = sprintf '%vd', $PERL_VERSION;
PTDEBUG && _d('Perl version', $version);
return $version;
}
sub get_perl_module_version {
my (%args) = @_;
my $item = $args{item};
return unless $item;
my $var = '$' . $item->{item} . '::VERSION';
my $version = eval "use $item->{item}; $var;";
PTDEBUG && _d('Perl version for', $var, '=', $version);
return $version;
}
sub get_mysql_variable {
return get_from_mysql(
show => 'VARIABLES',
@_,
);
}
sub get_from_mysql {
my (%args) = @_;
my $show = $args{show};
my $item = $args{item};
my $instances = $args{instances};
return unless $show && $item;
if ( !$instances || !@$instances ) {
PTDEBUG && _d('Cannot check', $item,
'because there are no MySQL instances');
return;
}
if ($item->{item} eq 'MySQL' && $item->{type} eq 'mysql_variable') {
@{$item->{vars}} = grep { $_ eq 'version' || $_ eq 'version_comment' } @{$item->{vars}};
}
my @versions;
my %version_for;
foreach my $instance ( @$instances ) {
next unless $instance->{id}; # special system instance has id=0
my $dbh = $instance->{dbh};
local $dbh->{FetchHashKeyName} = 'NAME_lc';
my $sql = qq/SHOW $show/;
PTDEBUG && _d($sql);
my $rows = $dbh->selectall_hashref($sql, 'variable_name');
my @versions;
foreach my $var ( @{$item->{vars}} ) {
$var = lc($var);
my $version = $rows->{$var}->{value};
PTDEBUG && _d('MySQL version for', $item->{item}, '=', $version,
'on', $instance->{name});
push @versions, $version;
}
$version_for{ $instance->{id} } = join(' ', @versions);
}
return \%version_for;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
1;
}
# ###########################################################################
# End VersionCheck package
# ###########################################################################
# ###########################################################################
# This is a combination of modules and programs in one -- a runnable module.
# http://www.perl.com/pub/a/2006/07/13/lightning-articles.html?page=last
# Or, look it up in the Camel book on pages 642 and 643 in the 3rd edition.
#
# Check at the end of this package for the call to main() which actually runs
# the program.
# ###########################################################################
package pt_heartbeat;
use strict;
use warnings FATAL => 'all';
use English qw(-no_match_vars);
use List::Util qw(min max sum);
use Time::HiRes qw(gettimeofday time sleep usleep);
use IO::File;
use Percona::Toolkit;
use constant PTDEBUG => $ENV{PTDEBUG} || 0;
Transformers->import(qw(ts unix_timestamp));
my @dbhs; # Holds slave DBHs if --recurse
my @sths; # Holds [$host, $sth] if --recurse
sub main {
local @ARGV = @_; # set global ARGV for this package
# Reset all global vars between test runs else weird things happen.
@dbhs = ();
@sths = ();
# ########################################################################
# Get configuration information.
# ########################################################################
my $o = new OptionParser();
$o->get_specs();
$o->get_opts();
my $dp = $o->DSNParser;
$dp->prop('dbidriver', $o->get('dbi-driver'));
$dp->prop('set-vars', $o->set_vars());
if ( !$o->get('help') ) {
my @frames = $o->get('frames') =~ m/(\d+[smhd])/g;
if ( @frames ) {
my @times;
foreach my $frame ( @frames ) {
my ($num, $suf) = $frame =~ m/(\d+)([smhd])$/;
if ( !$num ) {
$o->save_error("Invalid --frames argument");
}
else {
push @times,
$suf eq 's' ? $num # Seconds
: $suf eq 'm' ? $num * 60 # Minutes
: $suf eq 'h' ? $num * 3600 # Hours
: $num * 86400; # Days
}
}
$o->set('frames', \@times);
}
else {
$o->save_error("Invalid --frames argument");
}
if ( $o->get('create-table')
&& !($o->get('database') && $o->get('table'))) {
$o->save_error('--create-table requires both --database and --table');
}
if ( $o->get('interval') < 0.01 ) {
$o->save_error("--interval must be >= 0.01");
}
if ( !$o->get('stop') && !$o->get('database') ) {
$o->save_error('--database must be specified');
}
}
eval {
MasterSlave::check_recursion_method($o->get('recursion-method'));
};
if ( $EVAL_ERROR ) {
$o->save_error("Invalid --recursion-method: $EVAL_ERROR")
}
$o->usage_or_errors();
# ########################################################################
# Make common modules and var for frequently used options.
# ########################################################################
my $q = new Quoter();
my $tp = new TableParser(Quoter => $q);
my $interval = $o->get('interval');
my $skew = $o->get('update') ? 0 : $o->get('skew');
my $sentinel = $o->get('sentinel');
my $frames = $o->get('frames');
my $db = $o->get('database');
my $tbl = $o->get('table');
# ########################################################################
# Create --sentinel file if --stop was given, and possibly exit.
# ########################################################################
if ( $o->get('stop') ) {
PTDEBUG && _d('Creating sentinel file', $sentinel);
my $file = IO::File->new($sentinel, ">>")
or die "Cannot open $sentinel: $OS_ERROR\n";
print $file "Remove this file to permit pt-heartbeat to run\n"
or die "Cannot write to $sentinel: $OS_ERROR\n";
close $file
or die "Cannot close $sentinel: $OS_ERROR\n";
print STDOUT "Successfully created file $sentinel\n";
# Exit only if no other action (update, monitor, check) is given.
if ( !$o->get('update') && !$o->get('check') && !$o->get('monitor') ) {
PTDEBUG && _d("Nothing more to do, quitting");
return 0;
}
else {
# Wait for all other running instances to quit, assuming they have the
# same --interval as this invocation. Then remove the file and
# continue.
PTDEBUG && _d("Waiting for other instances to quit");
sleep $interval ;
PTDEBUG && _d("Unlinking", $sentinel);
unlink $sentinel
or die "Cannot unlink $sentinel: $OS_ERROR";
}
}
# ########################################################################
# Connect to MySQL.
# ########################################################################
if ( $o->get('ask-pass') ) {
$o->set('password', OptionParser::prompt_noecho("Enter password: "));
}
my $dsn_defaults = $dp->parse_options($o);
my $dsn = @ARGV ? $dp->parse(shift @ARGV, $dsn_defaults)
: $dsn_defaults;
my $dbh = $dp->get_dbh($dp->get_cxn_params($dsn), {AutoCommit=>1});
$dbh->{InactiveDestroy} = 1; # Don't disconnect on fork
$dbh->{FetchHashKeyName} = 'NAME_lc';
$dbh->do("USE `$db`");
# ########################################################################
# If --check-read-only option was given and we are in --update mode
# we wait until server is writable , or run-time is over, or sentinel file
# We also do this check after daemon is up and running, but it is necessary
# to check this before attempting to create the table and inserting rows
# https://bugs.launchpad.net/percona-toolkit/+bug/1328686
# #######################################################################
if ( $o->get('check-read-only') && $o->get('update') ) {
PTDEBUG && _d('Checking if server is read_only');
if ( server_is_readonly($dbh) && PTDEBUG ) {
_d('Server is read-only, waiting')
}
my $start_time = time;
my $run_time = $o->get('run-time');
my $interval = $o->get('interval') || 5;
while (server_is_readonly($dbh)) {
sleep($interval);
if (
($run_time && $run_time < time - $start_time)
|| -f $sentinel
) {
return 0;
}
}
}
# ########################################################################
# Create the heartbeat table if --create-table was given.
# ########################################################################
my $utc = $o->get('utc');
my $now_func = $utc ? 'UTC_TIMESTAMP()' : 'NOW()';
my $db_tbl = $q->quote($db, $tbl);
my $server_id = $dbh->selectrow_array('SELECT @@server_id');
if ( $o->get('create-table') ) {
my $sql = $o->read_para_after(__FILE__, qr/MAGIC_create_heartbeat/);
$sql =~ s/heartbeat/IF NOT EXISTS $db_tbl/;
PTDEBUG && _d($sql);
$dbh->do($sql);
$sql = ($o->get('replace') ? "REPLACE" : "INSERT")
. qq/ INTO $db_tbl (ts, server_id) VALUES ($now_func, $server_id)/;
PTDEBUG && _d($sql);
# This may fail if the table already existed and already had this row.
# We eval to ignore this possibility.
# NOTE: This can break replication though! See:
# https://bugs.launchpad.net/percona-toolkit/+bug/1004567
# So --replace should be used in most cases.
eval { $dbh->do($sql); };
}
# ########################################################################
# Get and check heartbeat table structure.
# ########################################################################
my $tbl_def = $dbh->selectrow_arrayref("SHOW CREATE TABLE $db_tbl");
my $tbl_struct = $tp->parse($tbl_def->[1]);
die "Heartbeat table $db_tbl does not have a ts column"
unless $tbl_struct->{is_col}->{ts};
my $hires_ts = $tbl_struct->{type_for}->{ts} =~ m/char/i ? 1 : 0;
PTDEBUG && _d("Hi-res ts:", ($hires_ts ? 'yes' : 'no'));
my $id = $tbl_struct->{is_col}->{id}; # legacy table struct
die "Heartbeat table $db_tbl does not have a server_id or id column"
unless $tbl_struct->{is_col}->{server_id} || $id;
# If there's an id column, then we're running in legacy mode. If there's
# a server_id column, then we're running in the new mode which supports
# multiple --update instances.
if ( $tbl_struct->{is_col}->{id} && $tbl_struct->{is_col}->{server_id} ) {
die "Heartbeat table $db_tbl cannot have both an id column and "
. "a server_id column";
}
# pk_col and pk_val are used to identify the heartbeat row to update or
# or monitor.
my ($pk_col, $pk_val);
if ( $id ) {
# Legacy mode: update heartbeat row WHERE id=1 and monitor heartbeat
# row WHERE id=1.
$pk_col = 'id';
$pk_val = '1';
}
elsif ( $tbl_struct->{is_col}->{server_id} ) {
# Multi-update mode: update heartbeat row WHERE server_id=@@server_id
# and monitor heartbeat row WHERE server_id=master_server_id.
if ( $o->get('update') ) {
$pk_col = 'server_id';
$pk_val = $server_id;
}
else { # monitor or check
my $master_server_id = $o->get('master-server-id');
if ( !$master_server_id ) {
eval {
my $ms = new MasterSlave(
OptionParser => $o,
DSNParser => $dp,
Quoter => $q,
);
my $master_dsn = $ms->get_master_dsn($dbh, $dsn, $dp)
or die "This server is not a slave";
my $master_dbh = $dp->get_dbh($dp->get_cxn_params($master_dsn),
{ AutoCommit => 1 });
($master_server_id)
= $master_dbh->selectrow_array('SELECT @@server_id');
$master_dbh->disconnect;
};
if ( $EVAL_ERROR ) {
PTDEBUG && _d("Error determining master id:", $EVAL_ERROR);
}
}
if ( !$master_server_id ) {
die "The --master-server-id option must be specified because "
. "the heartbeat table $db_tbl uses the server_id column "
. "for --update or --check but the server's master could "
. "not be automatically determined.\n"
. "Please read the DESCRIPTION section of the pt-heartbeat POD.\n";
}
$pk_col = 'server_id';
$pk_val = $master_server_id;
}
}
else {
die "Heartbeat table $db_tbl does not have a server_id or id column";
}
PTDEBUG && _d('Heartbeat row primary key:', $pk_col, '=', $pk_val);
# Check that heartbeat table has at least 1 row unless --replace because
# --replace will create the row if it doesn't exist.
if ( !$o->get('replace') ) {
my $sql = "SELECT 1 FROM $db_tbl WHERE $pk_col='$pk_val' LIMIT 1";
PTDEBUG && _d($sql);
my $row = $dbh->selectall_arrayref($sql);
if ( scalar @$row == 0 ) {
PTDEBUG && _d('No heartbeat row in table');
if ( $o->get('insert-heartbeat-row') ) {
my $sql = "INSERT INTO $db_tbl ($pk_col, ts) "
. "VALUES ('$pk_val', $now_func)";
PTDEBUG && _d($sql);
$dbh->do($sql);
}
else {
if ( $id ) {
die "The heartbeat table is empty.\n"
. "At least one row must be inserted into the heartbeat "
. "table.\nPlease read the DESCRIPTION section of the "
. "pt-heartbeat POD.\n";
}
else {
die "No row found in heartbeat table for server_id $pk_val.\n"
. "At least one row must be inserted into the heartbeat "
. "table for server_id $pk_val.\nPlease read the "
. "DESCRIPTION section of the pt-heartbeat POD.\n";
}
}
}
}
# ########################################################################
# Make sth for updating or checking the heartbeat table.
# ########################################################################
my ($heartbeat_sql, $heartbeat_sth);
my ($get_delay, $update_heartbeat);
if ( $o->get('update') ) {
my @master_status_cols = grep { $tbl_struct->{is_col}->{$_} }
qw(file position);
PTDEBUG && _d("Master status columns:", join(', ', @master_status_cols));
my @slave_status_cols = grep { $tbl_struct->{is_col}->{$_} }
qw(relay_master_log_file exec_master_log_pos);
PTDEBUG && _d("Slave status columns:", join(', ', @slave_status_cols));
# Just a shortcut so I don't have to check both arrays when creating
# SQL statement below.
my @extra_cols = (@master_status_cols, @slave_status_cols);
if ( $o->get('replace') ) {
$heartbeat_sql
= "REPLACE INTO $db_tbl (ts, $pk_col"
. (@extra_cols ? ", " . join(', ', @extra_cols) : '')
. ") VALUES (?, '$pk_val'"
. (@extra_cols ? ", " . join(', ', map { '?' } @extra_cols) : '')
. ")";
}
else {
$heartbeat_sql
= "UPDATE $db_tbl SET ts=?"
. (@extra_cols ? ", " . join(', ', map { "$_=?" } @extra_cols) : "")
. " WHERE $pk_col='$pk_val'";
}
PTDEBUG && _d("UPDATE SQL:", $heartbeat_sql);
$heartbeat_sth = $dbh->prepare($heartbeat_sql);
my $ro_check = !!$o->get('check-read-only');
$update_heartbeat = sub {
my ($sth) = @_;
my @vals;
return if $ro_check && server_is_readonly($dbh);
my $sql;
if ( @master_status_cols ) {
$sql = "SHOW MASTER STATUS";
PTDEBUG && _d($dbh, $sql);
my $row = $dbh->selectrow_hashref($sql);
if ( !$row ) {
PTDEBUG && _d("No row from", $sql);
push @vals, map { undef } @master_status_cols;
}
else {
push @vals, map { $row->{$_} } @master_status_cols;
}
}
if ( @slave_status_cols ) {
$sql = "SHOW SLAVE STATUS";
PTDEBUG && _d($dbh, $sql);
my $row = $dbh->selectrow_hashref($sql);
if ( !$row ) {
PTDEBUG && _d("No row from", $sql);
push @vals, map { undef } @slave_status_cols;
}
else {
push @vals, map { $row->{$_} } @slave_status_cols;
}
}
my $retry = Retry->new();
$retry->retry(
tries => 3,
wait => sub { sleep 0.25; return; },
try => sub {
$sth->execute(ts(time, $utc), @vals);
PTDEBUG && _d($sth->{Statement});
$sth->finish();
},
fail => sub {
my (%args) = @_;
my $error = $args{error};
if ( $error =~ m/Deadlock found/ ) {
return 1; # try again
}
else {
return 0;
}
},
final_fail => sub {
my (%args) = @_;
die $args{error};
}
);
return;
};
}
else { # --monitor or --check
my $dbi_driver = lc $o->get('dbi-driver');
# UNIX_TIMESTAMP(UTC_TIMESTAMP()) instead of UNIX_TIMESTAMP() alone,
# so we make sure that we aren't being fooled by a timezone.
# UNIX_TIMESTAMP(ts) replaces unix_timestamp($ts) -- MySQL is the
# authority here, so let it calculate everything.
$heartbeat_sql
= "SELECT " . ($utc ? 'UNIX_TIMESTAMP(ts)' : 'ts')
. ($dbi_driver eq 'mysql' ? '/*!50038, @@hostname AS host*/' : '')
. ($id ? "" : ", server_id")
. " FROM $db_tbl "
. "WHERE $pk_col='$pk_val' "
. "LIMIT 1";
PTDEBUG && _d("SELECT SQL:", $heartbeat_sql);
$heartbeat_sth = $dbh->prepare($heartbeat_sql);
$get_delay = sub {
my ($sth) = @_;
$sth->execute();
PTDEBUG && _d($sth->{Statement});
my ($ts, $hostname, $server_id) = $sth->fetchrow_array();
my $now = time;
PTDEBUG && _d("Heartbeat from server", $server_id, "\n",
" now:", ts($now, $utc), "\n",
" ts:", $ts, "\n",
"skew:", $skew);
my $delay = $now - unix_timestamp($ts, $utc) - $skew;
PTDEBUG && _d('Delay', sprintf('%.6f', $delay), 'on', $hostname);
# Because we adjust for skew, if the ts are less than skew seconds
# apart (i.e. replication is very fast) then delay will be negative.
# So it's effectively 0 seconds of lag.
$delay = 0.00 if $delay < 0;
$sth->finish();
return ($delay, $hostname, $pk_val);
};
# https://bugs.launchpad.net/percona-toolkit/+bug/1163372
# "pt-heartbeat --utc --check always returns 0"
if ( $utc ) {
my $sql = "SET time_zone='+0:00'";
PTDEBUG && _d($sql);
$dbh->do($sql);
}
}
# Do a little check just to make sure the table is there, so there's one last
# chance to catch errors before daemonizing.
if ( $o->get('update') ) {
$update_heartbeat->($heartbeat_sth);
}
else {
$get_delay->($heartbeat_sth);
}
$heartbeat_sth->finish();
# ########################################################################
# Daemonize only after (potentially) asking for passwords for --ask-pass.
# ########################################################################
my $daemon;
if ( $o->get('daemonize') ) {
$daemon = new Daemon(o=>$o);
$daemon->daemonize();
PTDEBUG && _d('I am a daemon now');
}
elsif ( $o->get('pid') ) {
# We're not daemoninzing, it just handles PID stuff.
$daemon = new Daemon(o=>$o);
$daemon->make_PID_file();
}
# ########################################################################
# --check and exit if --check was given.
# ########################################################################
if ( $o->get('check') ) {
PTDEBUG && _d('--check and exit');
check_delay(
dsn => $dsn,
dbh => $dbh,
sth => $heartbeat_sth,
sql => $heartbeat_sql,
get_delay => $get_delay,
interval => $interval,
skew => $skew,
hires_ts => $hires_ts,
OptionParser => $o,
DSNParser => $dp,
);
disconnect($dbh, $heartbeat_sth);
return 0;
}
# ########################################################################
# Do the version-check
# ########################################################################
if ( $o->get('version-check') && (!$o->has('quiet') || !$o->get('quiet')) ) {
VersionCheck::version_check(
force => $o->got('version-check'),
instances => [ { dbh => $dbh, dsn => $dsn } ],
);
}
# ########################################################################
# Setup moving averages for --frames.
# ########################################################################
my @samples;
my $limit = max(@$frames);
# 2.00s [ 0.05s, 0.01s, 0.00s ]
my $format = ($hires_ts ? '%.2f' : '%4d') . "s "
. "[ " . join(", ", map { "%5.2fs" } @$frames) . " ]"
. ($o->get('print-master-server-id') ? " %d" : '')
. "\n";
# ########################################################################
# Monitor or update the heartbeat table.
# ########################################################################
my $end = $o->get('run-time') ? int(time + $o->get('run-time')) : 0;
PTDEBUG && _d($end ? ('Will exit at', ts($end)) : 'Running forever');
my $get_next_interval = make_interval_iter($interval, $skew);
while ( # Stop if...
(!$end || int(time) < $end) # runtime exceeded, or
&& !-f $sentinel # sentinel file created
) {
eval {
my $next_interval = $get_next_interval->();
# save current time in variable to avoid race condition
# https://bugs.launchpad.net/percona-toolkit/+bug/1406390
my $time = time;
if ( $time >= $next_interval ) {
do { $next_interval = $get_next_interval->() }
until $next_interval > $time;
PTDEBUG && _d("Missed last interval; next interval:",
ts($next_interval));
}
sleep $next_interval - $time;
PTDEBUG && _d('Woke up at', ts(time));
# Connect or reconnect if necessary.
if ( !$dbh->ping() ) {
$dbh = $dp->get_dbh($dp->get_cxn_params($dsn), { AutoCommit => 1 });
$dbh->{InactiveDestroy} = 1; # Don't disconnect on fork
$dbh->{FetchHashKeyName} = 'NAME_lc';
$dbh->do("USE `$db`");
$heartbeat_sth = undef;
}
if ( $o->get('monitor') ) {
$heartbeat_sth ||= $dbh->prepare($heartbeat_sql);
my ($delay) = $get_delay->($heartbeat_sth);
unshift @samples, $delay;
pop @samples if @samples > $limit;
# Calculate and print results
my @vals = map {
my $bound = min($_, scalar(@samples));
sum(@samples[0 .. $bound-1]) / $_;
} @$frames;
my $output = sprintf $format, $delay, @vals, $pk_val;
if ( my $file = $o->get('file') ) {
open my $file, '>', $file
or die "Can't open $file: $OS_ERROR";
print $file $output
or die "Can't print to $file: $OS_ERROR";
close $file
or die "Can't close $file: $OS_ERROR";
}
else {
print $output;
}
}
else { # --update mode
$heartbeat_sth ||= $dbh->prepare($heartbeat_sql);
$update_heartbeat->($heartbeat_sth);
}
};
if ( $EVAL_ERROR ) {
my ( $err ) = $EVAL_ERROR =~ m/^(?:DBI|DBD).*failed: (.*?)\s*at \S+ line .*/;
if ( $err ) {
warn "$err\n";
}
else {
die $EVAL_ERROR;
}
}
}
disconnect($dbh, $heartbeat_sth);
return 0;
}
# ############################################################################
# Subroutines.
# ############################################################################
sub server_is_readonly {
my ($dbh) = @_;
my ( $is_read_only ) = $dbh->selectrow_array(q{SELECT @@global.read_only});
if ( $is_read_only ) {
my ( $privs ) = eval { $dbh->selectrow_array(q{SHOW GRANTS}) };
if ( $privs && $privs =~ /\b(?:ALL|SUPER)\b/ ) {
$is_read_only = undef;
}
}
return $is_read_only;
}
# Check the delay on a single server. Optionally recurse to all its slaves.
sub check_delay {
my ( %args ) = @_;
my @required_args = qw(dsn dbh sth sql get_delay interval skew OptionParser DSNParser);
foreach my $arg ( @required_args ) {
die "I need a $arg argument" unless $args{$arg};
}
my ($dsn, $dbh, $sth, $sql, $get_delay, $interval, $skew, $o, $dp)
= @args{@required_args};
PTDEBUG && _d('Checking slave delay');
# Collect a list of connections to the slaves.
if ( $o->get('recurse') ) {
PTDEBUG && _d('Recursing to slaves');
my $ms = new MasterSlave(
OptionParser => $o,
DSNParser => $dp,
Quoter => "Quoter",
);
$ms->recurse_to_slaves(
{ dbh => $dbh,
dsn => $dsn,
callback => sub {
my ( $dsn, $dbh, $level ) = @_;
push @dbhs, $dbh;
PTDEBUG && _d("Found slave", $dp->as_string($dsn));
push @sths, [ $dsn, $dbh->prepare($sql) ];
},
},
);
}
else {
push @sths, [ $dsn, $sth ];
}
my $format_delay = ($args{hires_ts} ? '%.2f' : '%d')
. ($o->get('print-master-server-id') ? " %d" : "")
. "\n";
my $format_host = "%-20s $format_delay";
# Before hi-res ts, we could check all slaves at one interval, assuming
# the checks were fast, i.e. able to be done within one interval. But
# now we have intervals up to 0.01 fast and that's too short to check all
# slaves. So for each slave we sleep until the next interval.
my $get_next_interval = make_interval_iter($interval, $skew);
SLAVE:
foreach my $thing ( @sths ) {
my ( $dsn, $sth ) = @$thing;
PTDEBUG && _d('Checking slave', $dp->as_string($dsn));
my $next_interval = $get_next_interval->();
# save current time in variable to avoid race condition
# https://bugs.launchpad.net/percona-toolkit/+bug/1406390
my $time = time;
if ( $time >= $next_interval ) {
do { $next_interval = $get_next_interval->() }
until $next_interval > $time;
PTDEBUG && _d("Missed last interval; next interval:",
ts($next_interval));
}
sleep $next_interval - $time;
PTDEBUG && _d('Woke up at', ts(time));
my ($delay, $hostname, $master_server_id) = $get_delay->($sth);
if ( $o->get('recurse') ) {
# Must print not only the delay, but the server's hostname if
# available. Prefer the hostname from the DSN, then the hostname
# from @@hostname, then fall back to Socket or default File.
my $host = $dsn->{h} || $hostname || $dsn->{S} || $dsn->{F} || '';
if ( $dsn->{P} && $dsn->{P} ne '3306' ) {
$host .= ":$dsn->{P}";
}
printf($format_host, $host, $delay, $master_server_id);
}
else {
# Just print the delay.
printf($format_delay, $delay, $master_server_id);
}
}
return;
}
# The interval iterator works by first returning the next whole second.
# So if the current time (since epoch) is 5.123, then the next whole second
# is 6.0, plus an optional skew. The next interval is 6.0 * the interval.
# If the interval is 0.5s, then the next interval is 6.5, plus an optional
# skew. Therefore, we always start on a whole second and return when the
# next interval is or should be. The caller can then sleep(time-next_interval)
# to wake up at that interval. If the caller misses the next interval,
# they just call the iterator until the next interval is later then the
# current time.
sub make_interval_iter {
my ( $interval, $skew ) = @_;
die "I need an interval argument" unless defined $interval;
my ($s) = gettimeofday();
my $start_s = $s + 1;
my $i = 0;
my $get_next_interval = sub {
return $start_s + ($interval * $i++) + $skew;
};
return $get_next_interval;
}
sub disconnect {
my ( $dbh, $sth ) = @_;
PTDEBUG && _d('Disconnecting');
$sth->finish() if $sth;
foreach my $handle ( @sths ) {
my $sth = $handle->[1];
$sth->finish() if $sth;
}
foreach my $handle ( $dbh, @dbhs ) {
$handle->disconnect() if $handle;
}
return;
}
sub _d {
my ($package, undef, $line) = caller 0;
@_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
map { defined $_ ? $_ : 'undef' }
@_;
print STDERR "# $package:$line $PID ", join(' ', @_), "\n";
}
# ############################################################################
# Run the program.
# ############################################################################
if ( !caller ) { exit main(@ARGV); }
1; # Because this is a module as well as a script.
# ############################################################################
# Documentation.
# ############################################################################
=pod
=head1 NAME
pt-heartbeat - Monitor MySQL replication delay.
=head1 SYNOPSIS
Usage: pt-heartbeat [OPTIONS] [DSN] --update|--monitor|--check|--stop
pt-heartbeat measures replication lag on a MySQL or PostgreSQL server. You can
use it to update a master or monitor a replica. If possible, MySQL connection
options are read from your .my.cnf file.
Start daemonized process to update test.heartbeat table on master:
pt-heartbeat -D test --update -h master-server --daemonize
Monitor replication lag on slave:
pt-heartbeat -D test --monitor -h slave-server
pt-heartbeat -D test --monitor -h slave-server --dbi-driver Pg
Check slave lag once and exit (using optional DSN to specify slave host):
pt-heartbeat -D test --check h=slave-server
=head1 RISKS
Percona Toolkit is mature, proven in the real world, and well tested,
but all database tools can pose a risk to the system and the database
server. Before using this tool, please:
=over
=item * Read the tool's documentation
=item * Review the tool's known L<"BUGS">
=item * Test the tool on a non-production server
=item * Backup your production server and verify the backups
=back
=head1 DESCRIPTION
pt-heartbeat is a two-part MySQL and PostgreSQL replication delay monitoring
system that measures delay by looking at actual replicated data. This
avoids reliance on the replication mechanism itself, which is unreliable. (For
example, C<SHOW SLAVE STATUS> on MySQL).
The first part is an L<"--update"> instance of pt-heartbeat that connects to
a master and updates a timestamp ("heartbeat record") every L<"--interval">
seconds. Since the heartbeat table may contain records from multiple
masters (see L<"MULTI-SLAVE HIERARCHY">), the server's ID (@@server_id) is
used to identify records.
The second part is a L<"--monitor"> or L<"--check"> instance of pt-heartbeat
that connects to a slave, examines the replicated heartbeat record from its
immediate master or the specified L<"--master-server-id">, and computes the
difference from the current system time. If replication between the slave and
the master is delayed or broken, the computed difference will be greater than
zero and potentially increase if L<"--monitor"> is specified.
You must either manually create the heartbeat table on the master or use
L<"--create-table">. See L<"--create-table"> for the proper heartbeat
table structure. The C<MEMORY> storage engine is suggested, but not
required of course, for MySQL.
The heartbeat table must contain a heartbeat row. By default, a heartbeat
row is inserted if it doesn't exist. This feature can be disabled with the
L<"--[no]insert-heartbeat-row"> option in case the database user does not
have INSERT privileges.
pt-heartbeat depends only on the heartbeat record being replicated to the slave,
so it works regardless of the replication mechanism (built-in replication, a
system such as Continuent Tungsten, etc). It works at any depth in the
replication hierarchy; for example, it will reliably report how far a slave lags
its master's master's master. And if replication is stopped, it will continue
to work and report (accurately!) that the slave is falling further and further
behind the master.
pt-heartbeat has a maximum resolution of 0.01 second. The clocks on the
master and slave servers must be closely synchronized via NTP. By default,
L<"--update"> checks happen on the edge of the second (e.g. 00:01) and
L<"--monitor"> checks happen halfway between seconds (e.g. 00:01.5).
As long as the servers' clocks are closely synchronized and replication
events are propagating in less than half a second, pt-heartbeat will report
zero seconds of delay.
pt-heartbeat will try to reconnect if the connection has an error, but will
not retry if it can't get a connection when it first starts.
The L<"--dbi-driver"> option lets you use pt-heartbeat to monitor PostgreSQL
as well. It is reported to work well with Slony-1 replication.
=head1 MULTI-SLAVE HIERARCHY
If the replication hierarchy has multiple slaves which are masters of
other slaves, like "master -> slave1 -> slave2", L<"--update"> instances
can be ran on the slaves as well as the master. The default heartbeat
table (see L<"--create-table">) is keyed on the C<server_id> column, so
each server will update the row where C<server_id=@@server_id>.
For L<"--monitor"> and L<"--check">, if L<"--master-server-id"> is not
specified, the tool tries to discover and use the slave's immediate master.
If this fails, or if you want monitor lag from another master, then you can
specify the L<"--master-server-id"> to use.
For example, if the replication hierarchy is "master -> slave1 -> slave2"
with corresponding server IDs 1, 2 and 3, you can:
pt-heartbeat --daemonize -D test --update -h master
pt-heartbeat --daemonize -D test --update -h slave1
Then check (or monitor) the replication delay from master to slave2:
pt-heartbeat -D test --master-server-id 1 --check slave2
Or check the replication delay from slave1 to slave2:
pt-heartbeat -D test --master-server-id 2 --check slave2
Stopping the L<"--update"> instance one slave1 will not affect the instance
on master.
=head1 MASTER AND SLAVE STATUS
The default heartbeat table (see L<"--create-table">) has columns for saving
information from C<SHOW MASTER STATUS> and C<SHOW SLAVE STATUS>. These
columns are optional. If any are present, their corresponding information
will be saved.
=head1 Percona XtraDB Cluster
Although pt-heartbeat should work with all supported versions of Percona XtraDB
Cluster (PXC), we recommend using 5.5.28-23.7 and newer.
If you are setting up heartbeat instances between cluster nodes, keep in mind
that, since the speed of the cluster is determined by its slowest node,
pt-heartbeat will not report how fast the cluster itself is, but only how
fast events are replicating from one node to another.
You must specify L<"--master-server-id"> for L<"--monitor"> and L<"--check">
instances.
=head1 OPTIONS
Specify at least one of L<"--stop">, L<"--update">, L<"--monitor">, or L<"--check">.
L<"--update">, L<"--monitor">, and L<"--check"> are mutually exclusive.
L<"--daemonize"> and L<"--check"> are mutually exclusive.
This tool accepts additional command-line arguments. Refer to the
L<"SYNOPSIS"> and usage information for details.
=over
=item --ask-pass
Prompt for a password when connecting to MySQL.
=item --charset
short form: -A; type: string
Default character set. If the value is utf8, sets Perl's binmode on STDOUT to
utf8, passes the mysql_enable_utf8 option to DBD::mysql, and runs SET NAMES UTF8
after connecting to MySQL. Any other value sets binmode on STDOUT without the
utf8 layer, and runs SET NAMES after connecting to MySQL.
=item --check
Check slave delay once and exit. If you also specify L<"--recurse">, the
tool will try to discover slave's of the given slave and check and print
their lag, too. The hostname or IP and port for each slave is printed
before its delay. L<"--recurse"> only works with MySQL.
=item --check-read-only
Check if the server has read_only enabled; If it does, the tool skips doing
any inserts.
=item --config
type: Array
Read this comma-separated list of config files; if specified, this must be the
first option on the command line.
=item --create-table
Create the heartbeat L<"--table"> if it does not exist.
This option causes the table specified by L<"--database"> and L<"--table"> to
be created with the following MAGIC_create_heartbeat table definition:
CREATE TABLE heartbeat (
ts varchar(26) NOT NULL,
server_id int unsigned NOT NULL PRIMARY KEY,
file varchar(255) DEFAULT NULL, -- SHOW MASTER STATUS
position bigint unsigned DEFAULT NULL, -- SHOW MASTER STATUS
relay_master_log_file varchar(255) DEFAULT NULL, -- SHOW SLAVE STATUS
exec_master_log_pos bigint unsigned DEFAULT NULL -- SHOW SLAVE STATUS
);
The heartbeat table requires at least one row. If you manually create the
heartbeat table, then you must insert a row by doing:
INSERT INTO heartbeat (ts, server_id) VALUES (NOW(), N);
or if using L<"--utc">:
INSERT INTO heartbeat (ts, server_id) VALUES (UTC_TIMESTAMP(), N);
where C<N> is the server's ID; do not use @@server_id because it will replicate
and slaves will insert their own server ID instead of the master's server ID.
This is done automatically by L<"--create-table">.
A legacy version of the heartbeat table is still supported:
CREATE TABLE heartbeat (
id int NOT NULL PRIMARY KEY,
ts datetime NOT NULL
);
Legacy tables do not support L<"--update"> instances on each slave
of a multi-slave hierarchy like "master -> slave1 -> slave2".
To manually insert the one required row into a legacy table:
INSERT INTO heartbeat (id, ts) VALUES (1, NOW());
or if using L<"--utc">:
INSERT INTO heartbeat (id, ts) VALUES (1, UTC_TIMESTAMP());
The tool automatically detects if the heartbeat table is legacy.
See also L<"MULTI-SLAVE HIERARCHY">.
=item --daemonize
Fork to the background and detach from the shell. POSIX operating systems only.
=item --database
short form: -D; type: string
The database to use for the connection.
=item --dbi-driver
default: mysql; type: string
Specify a driver for the connection; C<mysql> and C<Pg> are supported.
=item --defaults-file
short form: -F; type: string
Only read mysql options from the given file. You must give an absolute
pathname.
=item --file
type: string
Print latest L<"--monitor"> output to this file.
When L<"--monitor"> is given, prints output to the specified file instead of to
STDOUT. The file is opened, truncated, and closed every interval, so it will
only contain the most recent statistics. Useful when L<"--daemonize"> is given.
=item --frames
type: string; default: 1m,5m,15m
Timeframes for averages.
Specifies the timeframes over which to calculate moving averages when
L<"--monitor"> is given. Specify as a comma-separated list of numbers with
suffixes. The suffix can be s for seconds, m for minutes, h for hours, or d for
days. The size of the largest frame determines the maximum memory usage, as up
to the specified number of per-second samples are kept in memory to calculate
the averages. You can specify as many timeframes as you like.
=item --help
Show help and exit.
=item --host
short form: -h; type: string
Connect to host.
=item --[no]insert-heartbeat-row
default: yes
Insert a heartbeat row in the L<"--table"> if one doesn't exist.
The heartbeat L<"--table"> requires a heartbeat row, else there's nothing
to L<"--update">, L<"--monitor">, or L<"--check">! By default, the tool will
insert a heartbeat row if one is not already present. You can disable this
feature by specifying C<--no-insert-heartbeat-row> in case the database user
does not have INSERT privileges.
=item --interval
type: float; default: 1.0
How often to update or check the heartbeat L<"--table">. Updates and checks
begin on the first whole second then repeat every L<"--interval"> seconds
for L<"--update"> and every L<"--interval"> plus L<"--skew"> seconds for
L<"--monitor">.
For example, if at 00:00.4 an L<"--update"> instance is started at 0.5 second
intervals, the first update happens at 00:01.0, the next at 00:01.5, etc.
If at 00:10.7 a L<"--monitor"> instance is started at 0.05 second intervals
with the default 0.5 second L<"--skew">, then the first check happens at
00:11.5 (00:11.0 + 0.5) which will be L<"--skew"> seconds after the last update
which, because the instances are checking at synchronized intervals, happened
at 00:11.0.
The tool waits for and begins on the first whole second just to make the
interval calculations simpler. Therefore, the tool could wait up to 1 second
before updating or checking.
The minimum (fastest) interval is 0.01, and the maximum precision is two
decimal places, so 0.015 will be rounded to 0.02.
If a legacy heartbeat table (see L<"--create-table">) is used, then the
maximum precision is 1s because the C<ts> column is type C<datetime>.
=item --log
type: string
Print all output to this file when daemonized.
=item --master-server-id
type: string
Calculate delay from this master server ID for L<"--monitor"> or L<"--check">.
If not given, pt-heartbeat attempts to connect to the server's master and
determine its server id.
=item --monitor
Monitor slave delay continuously.
Specifies that pt-heartbeat should check the slave's delay every second and
report to STDOUT (or if L<"--file"> is given, to the file instead). The output
is the current delay followed by moving averages over the timeframe given in
L<"--frames">. For example,
5s [ 0.25s, 0.05s, 0.02s ]
=item --password
short form: -p; type: string
Password to use when connecting.
If password contains commas they must be escaped with a backslash: "exam\,ple"
=item --pid
type: string
Create the given PID file. The tool won't start if the PID file already
exists and the PID it contains is different than the current PID. However,
if the PID file exists and the PID it contains is no longer running, the
tool will overwrite the PID file with the current PID. The PID file is
removed automatically when the tool exits.
=item --port
short form: -P; type: int
Port number to use for connection.
=item --print-master-server-id
Print the auto-detected or given L<"--master-server-id">. If L<"--check">
or L<"--monitor"> is specified, specifying this option will print the
auto-detected or given L<"--master-server-id"> at the end of each line.
=item --recurse
type: int
Check slaves recursively to this depth in L<"--check"> mode.
Try to discover slave servers recursively, to the specified depth. After
discovering servers, run the check on each one of them and print the hostname
(if possible), followed by the slave delay.
This currently works only with MySQL. See L<"--recursion-method">.
=item --recursion-method
type: array; default: processlist,hosts
Preferred recursion method used to find slaves.
Possible methods are:
METHOD USES
=========== ==================
processlist SHOW PROCESSLIST
hosts SHOW SLAVE HOSTS
none Do not find slaves
The processlist method is preferred because SHOW SLAVE HOSTS is not reliable.
However, the hosts method is required if the server uses a non-standard
port (not 3306). Usually pt-heartbeat does the right thing and finds
the slaves, but you may give a preferred method and it will be used first.
If it doesn't find any slaves, the other methods will be tried.
=item --replace
Use C<REPLACE> instead of C<UPDATE> for --update.
When running in L<"--update"> mode, use C<REPLACE> instead of C<UPDATE> to set
the heartbeat table's timestamp. The C<REPLACE> statement is a MySQL extension
to SQL. This option is useful when you don't know whether the table contains
any rows or not. It must be used in conjunction with --update.
=item --run-time
type: time
Time to run before exiting.
=item --sentinel
type: string; default: /tmp/pt-heartbeat-sentinel
Exit if this file exists.
=item --set-vars
type: Array
Set the MySQL variables in this comma-separated list of C<variable=value> pairs.
By default, the tool sets:
=for comment ignore-pt-internal-value
MAGIC_set_vars
wait_timeout=10000
Variables specified on the command line override these defaults. For
example, specifying C<--set-vars wait_timeout=500> overrides the defaultvalue of C<10000>.
The tool prints a warning and continues if a variable cannot be set.
=item --skew
type: float; default: 0.5
How long to delay checks.
The default is to delay checks one half second. Since the update happens as
soon as possible after the beginning of the second on the master, this allows
one half second of replication delay before reporting that the slave lags the
master by one second. If your clocks are not completely accurate or there is
some other reason you'd like to delay the slave more or less, you can tweak this
value. Try setting the C<PTDEBUG> environment variable to see the effect this
has.
=item --socket
short form: -S; type: string
Socket file to use for connection.
=item --stop
Stop running instances by creating the sentinel file.
This should have the effect of stopping all running
instances which are watching the same sentinel file. If none of
L<"--update">, L<"--monitor"> or L<"--check"> is specified, C<pt-heartbeat>
will exit after creating the file. If one of these is specified,
C<pt-heartbeat> will wait the interval given by L<"--interval">, then remove
the file and continue working.
You might find this handy to stop cron jobs gracefully if necessary, or to
replace one running instance with another. For example, if you want to stop
and restart C<pt-heartbeat> every hour (just to make sure that it is restarted
every hour, in case of a server crash or some other problem), you could use a
C<crontab> line like this:
0 * * * * pt-heartbeat --update -D test --stop \
--sentinel /tmp/pt-heartbeat-hourly
The non-default L<"--sentinel"> will make sure the hourly C<cron> job stops
only instances previously started with the same options (that is, from the
same C<cron> job).
See also L<"--sentinel">.
=item --table
type: string; default: heartbeat
The table to use for the heartbeat.
Don't specify database.table; use L<"--database"> to specify the database.
See L<"--create-table">.
=item --update
Update a master's heartbeat.
=item --user
short form: -u; type: string
User for login if not current user.
=item --utc
Ignore system time zones and use only UTC. By default pt-heartbeat does
not check or adjust for different system or MySQL time zones which can
cause the tool to compute the lag incorrectly. Specifying this option is
a good idea because it ensures that the tool works correctly regardless of
time zones.
If used, this option must be used for all pt-heartbeat instances:
L<"--update">, L<"--monitor">, L<"--check">, etc. You should probably
set the option in a L<"--config"> file. Mixing this option with pt-heartbeat
instances not using this option will cause false-positive lag readings
due to different time zones (unless all your systems are set to use UTC,
in which case this option isn't required).
=item --version
Show version and exit.
=item --[no]version-check
default: yes
Check for the latest version of Percona Toolkit, MySQL, and other programs.
This is a standard "check for updates automatically" feature, with two
additional features. First, the tool checks the version of other programs
on the local system in addition to its own version. For example, it checks
the version of every MySQL server it connects to, Perl, and the Perl module
DBD::mysql. Second, it checks for and warns about versions with known
problems. For example, MySQL 5.5.25 had a critical bug and was re-released
as 5.5.25a.
Any updates or known problems are printed to STDOUT before the tool's normal
output. This feature should never interfere with the normal operation of the
tool.
For more information, visit L<https://www.percona.com/version-check>.
=back
=head1 DSN OPTIONS
These DSN options are used to create a DSN. Each option is given like
C<option=value>. The options are case-sensitive, so P and p are not the
same option. There cannot be whitespace before or after the C<=> and
if the value contains whitespace it must be quoted. DSN options are
comma-separated. See the L<percona-toolkit> manpage for full details.
=over
=item * A
dsn: charset; copy: yes
Default character set.
=item * D
dsn: database; copy: yes
Default database.
=item * F
dsn: mysql_read_default_file; copy: yes
Only read default options from the given file
=item * h
dsn: host; copy: yes
Connect to host.
=item * p
dsn: password; copy: yes
Password to use when connecting.
If password contains commas they must be escaped with a backslash: "exam\,ple"
=item * P
dsn: port; copy: yes
Port number to use for connection.
=item * S
dsn: mysql_socket; copy: yes
Socket file to use for connection.
=item * u
dsn: user; copy: yes
User for login if not current user.
=back
=head1 ENVIRONMENT
The environment variable C<PTDEBUG> enables verbose debugging output to STDERR.
To enable debugging and capture all output to a file, run the tool like:
PTDEBUG=1 pt-heartbeat ... > FILE 2>&1
Be careful: debugging output is voluminous and can generate several megabytes
of output.
=head1 SYSTEM REQUIREMENTS
You need Perl, DBI, DBD::mysql, and some core packages that ought to be
installed in any reasonably new version of Perl.
=head1 BUGS
For a list of known bugs, see L<http://www.percona.com/bugs/pt-heartbeat>.
Please report bugs at L<https://bugs.launchpad.net/percona-toolkit>.
Include the following information in your bug report:
=over
=item * Complete command-line used to run the tool
=item * Tool L<"--version">
=item * MySQL version of all servers involved
=item * Output from the tool including STDERR
=item * Input files (log/dump/config files, etc.)
=back
If possible, include debugging output by running the tool with C<PTDEBUG>;
see L<"ENVIRONMENT">.
=head1 DOWNLOADING
Visit L<http://www.percona.com/software/percona-toolkit/> to download the
latest release of Percona Toolkit. Or, get the latest release from the
command line:
wget percona.com/get/percona-toolkit.tar.gz
wget percona.com/get/percona-toolkit.rpm
wget percona.com/get/percona-toolkit.deb
You can also get individual tools from the latest release:
wget percona.com/get/TOOL
Replace C<TOOL> with the name of any tool.
=head1 AUTHORS
Proven Scaling LLC, SixApart Ltd, Baron Schwartz, and Daniel Nichter
=head1 ABOUT PERCONA TOOLKIT
This tool is part of Percona Toolkit, a collection of advanced command-line
tools for MySQL developed by Percona. Percona Toolkit was forked from two
projects in June, 2011: Maatkit and Aspersa. Those projects were created by
Baron Schwartz and primarily developed by him and Daniel Nichter. Visit
L<http://www.percona.com/software/> to learn about other free, open-source
software from Percona.
=head1 COPYRIGHT, LICENSE, AND WARRANTY
This program is copyright 2007-2015 Percona LLC and/or its affiliates,
2006 Proven Scaling LLC and Six Apart Ltd.
Feedback and improvements are welcome.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation, version 2; OR the Perl Artistic License. On UNIX and similar
systems, you can issue `man perlgpl' or `man perlartistic' to read these
licenses.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA.
=head1 VERSION
pt-heartbeat 2.2.16
=cut